Resumen del contenido incluido en la página 1
OPEN
LOCK
Network Camera
Network Operating Instructions
Model No. WV-NS202A
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Resumen del contenido incluido en la página 2
CONTENTS Preface ............................................................................................................................ 3 About these operating instructions .............................................................................. 3 Trademarks and registered trademarks ...................................................................... 3 Viewer software ........................................................................................................... 3 Moni
Resumen del contenido incluido en la página 3
Preface About these operating instructions There are 2 sets of operating instructions for the WV-NS202A as follows. • Installation Guide • Network operating instructions These network operating instructions contain descriptions of how to operate this product using a PC via a network and of how to configure the settings. Refer to the installation guide for descriptions of how to install this product and of how to connect to a network. ® ® Adobe Reader is required to read PDF. When the Adobe Reade
Resumen del contenido incluido en la página 4
Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Step 1 Notes: • When "ON" is selected for "User Authentication", the Start up the web browser. authentication window will be displayed before dis- Step 2 playing live images for the user name and password Enter the IP address designated using the Panasonic IP entries. The default user name and password are as setup software in the address box of the browser.
Resumen del contenido incluido en la página 5
About the "Live" page !7 Full screen button !6 Alarm occurrence indication button !8 One shot button !5 Camera title !9 Mic input button @0 Audio output button q [Setup] button @1 SD recording status w [Live] button indicator e Multi-screen buttons r Image type buttons @2 Main area t Image capture size buttons y AUX buttons !3 BRIGHTNESS buttons u [SD] button !4 PRESET i [List] button o Zoom buttons !1 AUTO MODE !2 Control pad/buttons !0 Focus buttons q [Setup] button (*1) : The letters "JPEG"
Resumen del contenido incluido en la página 6
u [SD] button (manual SD recording Notes: button) (*2) • The auto track function works only when the size of This button will be displayed only when "Manual" is the object is larger than 1/48 of the main area and selected for "Save trigger" on the setup menu. also the contrast ratio between the object and the ( page 27) background is more than 5 %. Click this button to manually record images on the • The auto track function of this camera is the simpli- SD memory card. Refer to page 10 for de
Resumen del contenido incluido en la página 7
original position (where the camera was when "360° !3 BRIGHTNESS buttons (*2) map-shot" or "Preset map-shot" was carried out). : The displayed image will be darker. • When "360 map-shot" is carried out while the cam- : The adjusted brightness will return to the era is moving (panning/tilting), images captured default brightness. while panning/tilting may be displayed as the thumb- : Image will be brighter. nail display. In this case, stop the current operation and carry out "360 map-shot" again
Resumen del contenido incluido en la página 8
@2 Main area (*2) !9 Mic input button (*3) Images from the camera will be displayed in this Turns on/off the audio reception (hear audio from area. the camera on a PC). This button will be displayed The current time and date will be displayed at the only when "Mic input" or "Interactive" is selected for selected position in the time and date format set on "Audio mode" on the setup menu. ( page 49) the setup menu. ( pages 24 and 25). When this button is clicked, the button will turn into Click
Resumen del contenido incluido en la página 9
Refer to page 63 for further information about the access level. Note: When operated by a lower access level user, images displayed on the screen may be changed temporarily. This does not affect operation of the camera. Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be re
Resumen del contenido incluido en la página 10
Record images on the SD memory card manually Images displayed on the "Live" page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. ( page 27) Images recorded on the SD memory card can be copied onto the PC. ( page 29) Step 1 Step 4 Display the "Live" page. ( page 4) Click the [STOP] button to stop saving images on the SD memory card. Step 5 Click the [CLOSE] button to close the window. Step 2 Click the
Resumen del contenido incluido en la página 11
Action at an alarm occurrence The alarm action will be performed when the following alarms occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the EXT I/O connector 1-3 on the rear of the camera, the alarm action (camera action at an alarm occurrence) will be performed when the connected alarm device is activated. Alarm action to be performed differs depending on the settings configured in the "Camera motion on alarm" section of the [Alarm] tab. ( page 52) VMD
Resumen del contenido incluido en la página 12
Transmit images onto an FTP server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, set the user name and the password to access the FTP server to restrict users who can log into the FTP server. • To transmit images to the FTP server, select "Not use" for "SD memory card", or select "FTP error"
Resumen del contenido incluido en la página 13
Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the "Basic setup" page. ( page 27) To use the SD memory recording function featured in Panasonic’s network disk recorder, select "OFF" for "FTP peri- odic transmission" ( page 72) an
Resumen del contenido incluido en la página 14
Display the log list The following logs can be displayed in list form. • Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences and the alarm type will be displayed. • Manual log: Logs filed when images have been recorded on the SD memory card will be displayed. • FTP error log: Logs filed when the FTP periodic transmission function has failed will be displayed. Each log list can be displayed only when "ON" is selected for "Save logs" on the [LOG] tab of the "Ba
Resumen del contenido incluido en la página 15
[Time & date] Log list displayed in the log list win- Time and date when each log has been filed will be dis- dow played. [Number of the listed logs] Notes: Total number of the logs of the selected log type and a • When "OFF" is selected for "Time display" ( page number of the log being displayed on the top of the log 24), time and date of alarm occurrence will be dis- list will be displayed. played in 24-hour format. • Alarm log: Alarm occurrence time and date will be Note: filed as a log. Ent
Resumen del contenido incluido en la página 16
[Download] button Click this button to download all logs of the selected log list as a file onto the PC. [CLOSE] button Click this button to close the log list window. 16
Resumen del contenido incluido en la página 17
Playback of images saved on the SD memory card When clicking a time and date listed on the log list window, the "live" page will turn to the "playback" page. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed. Important: • Refresh interval of images may become slow during playback or download. • When many images are saved on the SD memory card, it may take time to display images on the "playback" page. • Even when the size o
Resumen del contenido incluido en la página 18
[STOP] button [Download] button Playback will stop and the "playback" window will turn to The selected image will be downloaded onto the PC. the "live" page. Before downloading images, designate the destination directory in advance. ( page 31) [NEXT IMAGE] button The following window will be displayed when the The next frame will be displayed and paused when this [Download] button is clicked. button is clicked during playback. Each time this button is clicked during pausing, the frame next to t
Resumen del contenido incluido en la página 19
About the network security of the camera Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "ON". ( pages 63 and 64) w Access restrictions by changing the HTTP port It is possible to prevent illegal access such as port scanning, etc. by changing the HTTP
Resumen del contenido incluido en la página 20
Display the setup menu and configure the settings of the camera using a PC The settings of the camera can be configured on the setup menu. The setup menu is only operable by users whose access level is "1. Administrator". How to display the setup menu Step 1 Display the "Live" page. ( page 4) Step 2 Click the [Setup] button on the "Live" page. → The window with the user name and password entry fields will be displayed. Step 3 Click the [OK] button after entering the user name and the passwor
