Resumen del contenido incluido en la página 1
Internet Camera
ICA-110/ICA-110W
User’s Manual
Version 1.1
Resumen del contenido incluido en la página 2
Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable
Resumen del contenido incluido en la página 3
and electronic equipment should understand the meaning of the crossed- out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, their respective companies claim these designations as trademarks or registered trademarks. Revision User’s Manual
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS ABOUT THIS GUIDE ...................................................6 INTRODUCTION............................................................7 FEATURES AND BENEFITS ..................................................8 UNPACKING THE PACKAGE..............................................10 SYSTEM REQUIREMENT ...................................................11 PHYSICAL DESCRIPTION ..................................................12 HARDWARE INSTALLATION ..................
Resumen del contenido incluido en la página 5
INSTALLATION .................................................................54 GETTING STARTED...........................................................59 USING IPVIEW PRO .........................................................62 CONFIGURING THE SYSTEM .............................................67 APPENDIX .....................................................................82 A FREQUENTLY ASKED QUESTIONS ................................82 B PING YOUR IP ADDRESS.....................
Resumen del contenido incluido en la página 6
ABOUT THIS GUIDE This manual provides instructions and illustrations on how to use your Internet Camera, includes: Chapter 1, Introduction, provides the general information on the camera. Chapter 2, Hardware Installation, describes the hardware installation procedure for the camera. Chapter 3, Security, explains the security feature of the camera. Chapter 4, Application of the Camera, provides the illustrations of the camera’s applications. Chapter 5, Using the Camera, guides you
Resumen del contenido incluido en la página 7
1 INTRODUCTION Thank you for purchasing the ICA-110W/ICA-110 Wireless/ Internet Camera, a camera device that can be connected directly to an Ethernet or Fast Ethernet network and also supported by the wireless transmission based on the IEEE 802.11g standard. Compared to the conventional PC Camera, the ICA-110/ICA- 110W features a built-in CPU and web-based solutions that can provide a cost-effective solution to transmit real-time high-quality video images and sounds for monitoring. The
Resumen del contenido incluido en la página 8
Features and Benefits Simple To Use The ICA-110/ICA-110W is a standalone system with built-in CPU requiring no special hardware or software such as PC frame grabber cards. The ICA-110/ICA-110W supports both ActiveX mode (for Internet Explorer users) and Java mode (for Internet Explorer and Netscape Navigator users). Therefore, all that is required is a web browser software such as Internet Explorer 5.0 or above or Netscape 6.0 or above. Just plug and view the picture from your ICA-11
Resumen del contenido incluido en la página 9
RS-485 Support The pin 5 & 6 of the I/O connectors are used for RS-485 data transmission. You can connect a special featured device (such as an external camera stand with rotation function) to meet your needs. When the external device is connected, you could configure the settings and control the device from the RS485 window of Web Configuration Utility. Remote Utility The powerful IPView Pro application allows the administrator to modify the ICA-110/ICA-110W settings from the remote
Resumen del contenido incluido en la página 10
Unpacking the Package Unpack the package and check all the items carefully. In addition to this User’s manual, be certain that you have: One ICA-110 or ICA-110W (with external antenna) One Installation CD-ROM One Quick Installation Guide One AC power adapter suitable for your country’s electric power One Camera Stand One RJ-45 Ethernet Cable If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in
Resumen del contenido incluido en la página 11
System Requirement Networking Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet. Wireless Local Area Network: IEEE 802.11g Wireless LAN. Accessing the Camera For Web Browser Users Operating System: Microsoft® Windows® 98SE/ME/ 2000/XP CPU: Intel Celeron 1.1GHz or above (Intel Pentium 4 is preferred) Memory Size: 128MB or above Resolution: 800x600 or above Microsoft® Internet Explorer 5.0 or above For IPView Pro Application Users Operating System: Microso
Resumen del contenido incluido en la página 12
Physical Description This section describes the externally visible features of the ICA- 110/ICA-110W. Front Panel 2. Power LED 3. Internal MIC 1. Link LED 1. Link LED The Link LED is positioned on the right side of the ICA- 110/ICA-110W’s lens while facing the ICA-110/ICA-110W. It is located to the left of the Power LED. A steady ORANGE light confirms that the camera has good connection to LAN connectivity. Dependent on the data traffic the LED will begin to flash to indicate
Resumen del contenido incluido en la página 13
2. Power LED The Power LED is positioned on the right side of the ICA- 110/ICA-110W’s lens while facing the ICA-110/ICA-110W. A steady BLUE light confirms that the ICA-110/ICA-110W is powered on. 3. Internal MIC The built-in omni-directional microphone allows the camera to receive sound and voice. Rear Panel Figure 1-2: Rear panel of ICA-110 13
Resumen del contenido incluido en la página 14
Figure 1-3: Rear panel of ICA-110W 1. External Antenna The rotatable external antenna allows you to adjust its position to obtain the maximum signal. 2. Network Cable Connector The ICA-110/ICA-110W’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the N-Way protocol and “Auto-MDIX” function, allowing the ICA-110/ICA-110W to automatically de
Resumen del contenido incluido en la página 15
light up. Release the reset button and the Power LED will begin to flash, indicating the ICA-110/ICA-110W is changing to factory reset. When factory reset is completed, the SSID is set as “NULL String” (This default setting will let the ICA-110W connect to ANY access point on the infrastructure network). The IP address will also return to the default setting as 192.168.0.20. 4. I/O Connector The camera provides the I/O connectors on the rear panel (pin 1/2 are for input, pin 3/4 are
Resumen del contenido incluido en la página 16
Screw Hole Bottom Panel Screw Hole 16
Resumen del contenido incluido en la página 17
Screw Hole Located on the top/bottom panel of the camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. 17
Resumen del contenido incluido en la página 18
2 HARDWARE INSTALLATION Attaching the Camera to the Stand The ICA-110/ICA-110W comes with a camera stand (optional) with a swivel ball screw head that can be attached to the ICA- 110/ICA-110W's bottom screw hole. Attach the camera stand to the ICA-110/ICA-110W and station it for your application. There are three holes located in the base of the camera stand allowing the ICA-110/ICA- 110W to be mounted on the ceiling or any wall securely. 18
Resumen del contenido incluido en la página 19
Connecting the Ethernet cable Connect an Ethernet cable to the network cable connector located on the ICA-110/ICA- 110W’s rear panel, and then attach it to the network. Attaching the Power Supply Attach the external power supply to the DC power input connector located on ICA- 110/ICA-110W’s rear panel, and then connect it to your local power supply. TIP: You can confirm power source is supplied from the LED indicators label Power on the ICA-110/ICA-110W is illuminated. 19
Resumen del contenido incluido en la página 20
3 SECURITY To ensure the highest security and prevent unauthorized usage of the ICA-110/ICA-110W the Administrator has the exclusive privilege to access the System Administration for settings and control requirements to allow users the level of entry and authorize the privileges for all users. The ICA-110/ICA-110W supports multi-level password protection and access to the ICA- 110/ICA-110W is strictly restricted to define the user who has a “User Name” and “User Password” that is assig
