Resumen del contenido incluido en la página 1
L5AB2/US (VCC-WB2000) GB 2002, 6, 25
INSTRUCTION MANUAL
VCC-WB2000
Network Camera
About this manual
Before installing and using this unit, please read this manual carefully. Be sure to keep it handy
for later reference.
Resumen del contenido incluido en la página 2
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Contents Information to user........................................... 2 Alarm Setting...................................................35 External Alarm Sensor Settings............35 Precautions....................................................... 3 MOTION DETECTOR SET Settings .......37 Features ............................................................ 4 Alarm Data Recording Capacity............38 Accessories ..........................................
Resumen del contenido incluido en la página 3
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Information to user This equipment has been tested and found to Safety Guard comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. THIS SYMBOL INDICATES THAT These limits are designed to provide THERE ARE IMPORTANT reasonable protection against harmful OPERATING AND MAINTENANCE interference in a residential installation. This INSTRUCTIONS IN THE equipment generates, uses, and can radiate LITERATURE ACCOMPANYING radio freque
Resumen del contenido incluido en la página 4
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Precautions In case of problem Cleaning Do not use the camera if smoke or a strange Dirt can be removed from the cabinet by • odour comes from the unit, or if it seems not to wiping it with a soft cloth. To remove stains, function correctly. Disconnect the power cord wipe with a soft cloth moistened with a soft immediately, and consult your dealer (or a detergent solution and wrung dry, then wipe Sanyo Authorized Service Centre). dry with dry soft cloth. Do no
Resumen del contenido incluido en la página 5
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Features Operating environment Web Server Function This camera is equipped with a web server The camera requires the following conditions to function. The camera can be accessed using a operate. computer’s web browser in order to view the OS: In this manual, the English versions of • camera images. In addition, up to a maximum of ® ® the Microsoft Windows 98 operating 16 users can simultaneously access a single ® ® system, the Microsoft Windows Millennium came
Resumen del contenido incluido en la página 6
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Name and Function of Each Part 4 5 3 PC CARD MONITOR ETHERNET RS-232C OUT 1 6 AC24V GND COM PC POWER 1 2 3 7 MODEM DC12V ALARM IN OUT CLASS 2 WIRING 2 1 Lens mount cap 3 Flange back locking screws (p. 8) Attach this cap to protect the lens mounting 4 Flange back adjustment dial (p. 8) section. When using the camera, remove the 5 PC CARD slot cap and attach the automatic iris-type lens (sold separately). Use this slot to insert a memory card or wireless LAN c
Resumen del contenido incluido en la página 7
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Name and Function of Each Part I PC CARD H MONITOR ETHERNET RS-232C OUT 8 G AC24V GND COM PC POWER 1 2 MODEM DC12V ALARM IN OUT CLASS 2 WIRING JF 9 8 Link indicator G RS-232C connector This indicator illuminates when the camera is Use this connector to connect the camera to connected to a network. It flashes while data a modem for transmission of data along transmission is in progress. telephone lines, or for connecting the camera to a computer. 9 ALARM
Resumen del contenido incluido en la página 8
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Attaching the Lens Use a DC-type automatic iris-type lens (sold separately). 1 Remove the lens mount cap. 3 Connect the lens iris plug to the lens iris output connector of the camera. Lenses from other manufacturers may have different plug shapes and specifications. In such cases, you may need to rewire the lens iris plug. (–) control coil (+) drive coil 1 3 (+) control coil (–) drive coil 2 4 2 Attach the CS mount-type lens. 2 1 2 1 Note: 3 4 The “L” part of
Resumen del contenido incluido en la página 9
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Flange Back Adjustment The flange back is the distance between the lens (sold separately) and the image capturing surface of the camera. It is adjusted at the time of shipment from the factory to accommodate the types of lenses that are generally assumed to be in use. Accordingly, the flange back does not normally need to be adjusted. However, if attaching a zoom lens and changing from wide angle to telephoto, the images may not be captured in proper focus, an
Resumen del contenido incluido en la página 10
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Connections Turn off the power for all equipment before making any connections. Basic Connections 1 Connect the camera to a computer. Connect a cable between the ETHERNET connectors of the camera and the computer. Use a crossed wire-type Ethernet cable. 2 Connect the power supply. When using this unit, the supplied clamping core A must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected. If using a co
Resumen del contenido incluido en la página 11
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Connections Connecting to a LAN Connecting to a Wireless LAN Use an Ethernet cable to connect the This camera can be connected to wired LANs ETHERNET connector of the camera to the using an Ethernet cable, and it can be LAN’s Ethernet switching hub. connected to wireless LANS. Use a straight-type Ethernet cable. To connect the camera to a wireless LAN, insert a wireless LAN card into the PC CARD slot of the camera. You should use only the recommended wirel
Resumen del contenido incluido en la página 12
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Connections PPP (Dial-up) Connections If connecting the camera using PPP, you will need to install the Network Archiving software (sold separately). In addition, the data that is transmitted via PPP connections consists of alarm images and alarm information. In addition to the connection method shown below, you can also connect the camera to an ISDN terminal adapter and use the Network Archiving software. Refer to the documentation provided with the Network Ar
Resumen del contenido incluido en la página 13
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings In order to use the camera as a network camera, you must make the following settings in the order given. When making network connection settings, the network settings must always be made first. 1 Installation of Plug-in Software (p. 13) Use the accessory setup CD-ROM to set u the computer. 2 Computer and Camera Settings (p. 16) Connect the computer and the camera directly, and access the camera using the computer’s web browser. 3 Networ
Resumen del contenido incluido en la página 14
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings 1 Installation of Plug-in Software Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the plug-in software makes it possible to view live images from network cameras using the computer’s web browser. 1 Turn on the power for the computer. 6 Click the [Next] button. After Windows has loaded, continue to the next step. 2 Insert the setup CD-ROM into the CD-ROM drive of the computer. 3 Click
Resumen del contenido incluido en la página 15
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings 8 Type in your username and organization 10 Click the [Finish] button. name, and then click the [Next] button. This completes the installation of the plug-in software. 9 Click the [Install] button. Installation of the software will start and the window display will change to show the (Uninstalling the plug-in software) installation progress. To uninstall the plug-in software, select “Add/Remove Programs” from the Windows Control Panel,
Resumen del contenido incluido en la página 16
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings Browser Settings Cookie Settings Check that the Security settings for Microsoft The camera uses cookies. Internet Explorer are set as described below. If using Internet Explorer Version 6.0 as the web Select Internet Options from the Tools menu, browser, select Internet Options from the Tools click the Security tab and then click the Custom menu, click the Privacy tab and then move the Level button to display the settings. slide bar to
Resumen del contenido incluido en la página 17
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings 2 Computer and Camera Settings Once the plug-in software has been installed, use the computer’s web browser to access the camera. Note: The network camera handles large volumes of image data that has been compressed into JPEG2000 format. In order to provide smooth access to the camera, you should close any other applications that you do not need to have open. 1 Click on the Network icon in the 6 Type in “ ID3” as the Username and comput
Resumen del contenido incluido en la página 18
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings 3 Network Connection Settings (Closing the initial window) 1 Select the desired language (e.g. English) To change the language or in the language selection window, and stop tasks such as live then click the [SET] button. image monitoring, click the The main menu window will be displayed. network disconnect button. Available languages: English, French, German, Spanish “SANYO NETWORK CAMERA, THE UNIT IS DISCONNECTED” will be displayed, an
Resumen del contenido incluido en la página 19
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings A NETWORK SET Settings These settings are used in order to connect the camera to the network. Note: Check with the network system administrator for details on settings related to the network itself, such as IP address settings. Default settings displayed Reset if necessary 1 2 3 4 1 Click the [NETWORK] button in the main 2 Set the password. menu. There are three access levels available (User, Operator and Administrator) and separate pas
Resumen del contenido incluido en la página 20
L5AB2/US (VCC-WB2000) GB 2002, 7, 4 Network Camera Settings Normally the HTTP PORT NUMBER setting 1 Changing a password should be left at the default value of “80” without Example: To change the password for the being changed, even if more than one camera is Administrator level (ID3) to “ 1234” connected to the network. Passwords can consist of between 4 and 8 4 MAC ADDRESS display numerals. This shows the Mac address for the camera. Type “1234” as the password in the password column for ID3,
