Resumen del contenido incluido en la página 1
DJ MIXER
DJM-750
http://pioneerdj.com/support/
The Pioneer DJ support site shown above offers FAQs, information on software and various other types of
information and services to allow you to use your product in greater comfort.
Operating Instructions
Resumen del contenido incluido en la página 2
Contents How to read this manual In this manual, names of channels and buttons indicated on the prod- uct, names of menus in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER] channel, [ON/OFF], [File] menu) Before start Features ....................................................................................................... 3 Connections Rear panel ................................................................................................... 4 Connecti
Resumen del contenido incluido en la página 3
Before start Before start Features This unit is a 4-channel DJ mixer carrying over the technology of the Pioneer DJM series, the world standard for club sound. It is not only equipped with a variety of functions for DJ performances, including USB sound card, BOOST COLOR FX, SOUND COLOR FX and BEAT EFFECT, it also uses a high sound quality, high reliability design and a panel layout with high operability to provide powerful support for all DJ performances. 24 bit/96 kHz STEREO 4-IN 4-OUT SO
Resumen del contenido incluido en la página 4
Connections Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected. Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord. Rear panel 1 2 34564 64534 For Europe CH 4CH 3 CH 2 CH 1 PHONOCD/ LINE LINECD/ LINE LINECD/ LINE PHONO CD/LINE L L L L RETURN R L(MONO) OFF POWER SIGNAL GNDSIGNAL GND ON R
Resumen del contenido incluido en la página 5
Connections Connecting input terminals ! When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc., be careful in connecting the audio interface to this unit’s input terminals and in the settings of the input selector switches. Also refer to the operating instructions of the DJ software and audio interface. Analog player Cassette deck, CD player, etc. Analog player (line level output devices) L R L R L R L R For Europe CH 4CH 3 CH 2 CH 1 PHONO CD/LINE LINE CD/LINE
Resumen del contenido incluido en la página 6
Connecting to the control panel About the driver software and setting utility software Be sure to connect using the included USB cable. The driver software is required to input and output the sound of a com- Computer puter using this unit’s built-in USB sound card. Prepare a computer on which a Windows or Mac operating system is installed and the pro- prietary driver software provided by Pioneer. When the driver software is installed, the settings utility software is installed at the same tim
Resumen del contenido incluido en la página 7
Connections OR ARISING OUT OF COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE, INCLUDING ANY WARRANTIES Cautions on Installation OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ! Before installing the driver software, turn off this unit’s power and SATISFACTORY QUALITY, ACCURACY, TITLE OR NON-INFRINGEMENT. disconnect the USB cable connecting this unit to the computer. ! If you connect this unit to your computer without installing the driver 4 DAMAGES AND REMEDIES FOR BREACH
Resumen del contenido incluido en la página 8
5 Proceed with installation according to the instructions 2 Press [POWER] button. Turn on the power of this unit. on the screen. ! The message [Installing device driver software] may appear when If [Windows Security] appears on the screen while the installation is this unit is first connected to the computer or when it is connected to in progress, click [Install this driver software anyway] and continue a different USB port on the computer. Wait a while until the message with the installati
Resumen del contenido incluido en la página 9
Connections Setting the audio data output from this unit to Adjusting the buffer size (when using Windows the computer ASIO) Display the setting utility before starting. If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size. 1 Click the [MIXER OUTPUT] tab. Display the setting utility before starting. Click the [ASIO] tab. 2 Click the [Mixer Audio Output] pull-down menu. Select and set the audio d
Resumen del contenido incluido en la página 10
Operation POWER a a a a MIC USB BEAT EFFECTS MASTER PHONO LINE LINE PHONO CD/LINE USB 1/2 CD/LINE USB 3/4 CD/LINE USB 5/6 CD/LINE USB 7/8 LEVEL i b b b b TRIM TRIM TRIM TRIM CH SELECT 0 OVER OVER OVER OVER 1 2 3 4 j MIC A B MST c c c c OVER PARAMETER q 10 10 10 10 10 AUTO d d d d 9 9 9 9 TAP BPM 7 7 7 7 7 % ms HI HI HI HI 4 4 4 4 4 MIC LEVEL 2 2 2 2 2 1 1 1 1 1 1 0 0 0 0 0 0 -26 6 -26 6 -26 6 -26 6 / / / / r - - - - - 1 1 1 1 1 BEAT HI MID MID MID MID - 2 - - - - 2 2 2 2 AUTO s - 3 - EQ/ - EQ
Resumen del contenido incluido en la página 11
Operation 1 MIC LEVEL control (page 13) n EQ CURVE (ISOLATOR, EQ) selector switch (page 12) Adjusts the sound level output from the [MIC] channel. Switches the function of the [EQ/ISO (HI, MID, LOW)] controls. 2 EQ (HI, LOW) controls (page 13) o CH FADER ( , ) selector switch (page 12) Adjusts the sound quality of the [MIC] channel. Switches the channel fader’s curve characteristics. 3 OFF, ON, TALK OVER selector switch (page 13) p CROSS FADER ( , , ) selector switch (page 12) Turns the micropho
Resumen del contenido incluido en la página 12
channel, the [MASTER] channel sound is output from the right channel. Basic Operation — [STEREO]: The sound of the channels for which the [CUE] button is pressed is output from the headphones in stereo. 4 Turn the [MIXING] control. Outputting sound This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] 1 Press [POWER] button. channel. Turn on the power of this unit. 5 Turn the [LEVEL] control for [HEADPHONES]. 2 Sw
Resumen del contenido incluido en la página 13
Operation ! To adjust the sound output from the [USB] terminals, select [REC Start playback using the crossfader OUT] at [Mixer Audio Output] in the setting utility. 1 Set the [CROSS FADER ASSIGN (A, THRU, B)] selector 1 Set the [MONO, STEREO] selector switch to [STEREO]. switch to [A] or [B]. 2 Turn the [BALANCE] control. 2 Press one of the [FADER START (CH-2, CH-3)] buttons. The sound’s left/right balance changes according to the direction in Select the channel to be started with the fade
Resumen del contenido incluido en la página 14
Advanced Operations 1 CH SELECT 1 2 3 4 2 MIC MST A B PARAMETER 4 AUTO 3 TAP BPM 5 % 6 7 ms 8 SOUND BOOST BEAT Number Name Descriptions COLOR COLOR EFFECT FX FX 1 Effect display section The name of the selected effect is displayed. — — 1 2 Channel select display section The name of the channel to which the effect is applied is displayed. 1 1 1 [AUTO] lights when the BPM measurement mode is set to the auto mode. 3 AUTO (TAP) — 1 1 [TAP] lights when in the manual input mode. When in the auto m
Resumen del contenido incluido en la página 15
Operation — [1] – [4]: The effect is applied to the sound of the respective ! When the BPM is set using the [TAP] button, the beat fraction is set channel. to [1/1] and the time of one beat (quarter note) is set as the effect — [MIC]: The effect is applied to the sound of [MIC] channel. time. — [CF.A], [CF.B]: The effect is applied to the sound of the cross- ! The BPM can be set manually by turning the [TIME] control while fader’s [A] (left) or [B] (right) side. pressing the [TAP] button. — [
Resumen del contenido incluido en la página 16
Types of effects BOOST COLOR FX/SOUND COLOR FX effect types Effect Name [BOOST] button status Descriptions [COLOR] control White noise generated inside this unit is mixed in to the sound of the channel via the filter and output. Turn counterclockwise: The cut-off frequency of the filter ! The volume can be adjusted by turning the [TRIM] con- through which the white noise passes gradually decreases. Off trols for the respective channels. The sound quality can Turn clockwise: The cut-off frequen
Resumen del contenido incluido en la página 17
Types of effects 1 2 1 SPIRAL FILTER This function adds a reverberation effect to the input sound. The filter’s cutoff frequency changes according to the beat fraction set When the delay time is changed, the pitch changes simultaneously. with the [BEAT c, d] buttons. Input sound turned off Fade-out Frequency Time 1 beat Use these to set the cycle for moving the cut-off BEAT c, d buttons frequency as a time of 1/4 – 64/1 with respect to the BEAT c, d buttons Use these to set a time delay of
Resumen del contenido incluido en la página 18
1 2 1 2 VINYL BRAKE REV ROLL The playing speed of the input sound changes according to the beat The sound being input at the point when the [ON/OFF] button is pressed multiple set with the [BEAT c, d] buttons. is recorded, and the recorded sound is reversed then output repeatedly according to the beat fraction set with the [BEAT c, d] buttons. Playing speed Original Single speed Stop Time Effect turned on Cycle Sets the cycle at which the playing speed of the input 1/1 reverse BEAT c, d b
Resumen del contenido incluido en la página 19
List of MIDI Messages List of MIDI Messages ! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as timbre, volume, etc. On this unit, values from 0 to 127 are output as CC mainly when controls and faders are operated. CC are also output when certain buttons are operated. ! “Note” is a MIDI term used when pressing or releasing notes on a piano or other keyboard. Category SW Name SW Type MIDI assig
Resumen del contenido incluido en la página 20
Category SW Name SW Type MIDI assignment Trigger/Toggle Transmitted data DELAY Switch CC 042 2 OFF=0, ON=127 ECHO Switch CC 055 2 OFF=0, ON=127 SPIRAL Switch CC 043 2 OFF=0, ON=127 REVERB Switch CC 054 2 OFF=0, ON=127 TRANS Switch CC 053 2 OFF=0, ON=127 FILTER Switch CC 059 OFF=0, ON=127 2 FLANGER Switch CC 050 OFF=0, ON=127 2 PHASER Switch CC 057 2 OFF=0, ON=127 ROBOT Switch CC 051 2 OFF=0, ON=127 VINYL Switch CC 061 2 OFF=0, ON=127 BRAKE SLIP Switch CC 058 2 OFF=0, ON=127 EFFECT ROLL SELECT