Manual de instrucciones de American DJ DJ Scan 250EX

Resumen del contenido incluido en la página 1

DJ Scan 250 EX™ General Information
Unpacking: Thank you for purchasing the DJ Scan 250 EX™ by
American DJ®. Every DJ Scan 250 EX™ has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your fix-
ture for any damage and be sure all equipment necessary to operate
the unit has arrived intac

Resumen del contenido incluido en la página 2

DJ Scan 250 EX™ Safety Precautions DJ Scan 250 EX™ General Instructions To optimize the performance of this product, please read these For Your Own Personal Safety, Please Read and Understand This operating instructions carefully to familiarize yourself with the basic Manual Completely Before You Attempt To Install Or Operate operations of this unit. These instructions contain important safety This Unit! information regarding the use and maintenance of this un

Resumen del contenido incluido en la página 3

DJ Scan 250 EX™ Set Up DJ Scan 250 EX™ Set Up REMOTE REMOTE REMOTE INPUT OUTPUT INPUT OUTPUT INPUT OUTPUT SOUND CONTROL SOUND CONTROL SOUND CONTROL INPUT INPUT INPUT Power Supply: Before plugging your unit in, be sure the source volt- conductor shielded cable (This cable may be purchased at almost all age in your area matches the required voltage for your American DJ® professional sound and lighting stores). Your cables sho

Resumen del contenido incluido en la página 4

DJ Scan 250 EX™ Set Up DJ Scan 250 EX™ System Menu Note: After making any adjustments in the operating 5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures system, there is a 10 second delay. may be implemented in a 3-pin XLR DMX line. When inserting stan- dard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be ADDR - DMX Address Setting. used,

Resumen del contenido incluido en la página 5

DJ Scan 250 EX™ System Menu DJ Scan 250 EX™ System Menu vate Pan inversion, select No and press Enter. 1. Tap the MENU button until “FHRS” is displayed, press ENTER. I TLT - Tilt Inversion 2. The display shows the running time of the unit. Press MENU 1. Tap the MENU button until “I TLT” is displayed, press ENTER. to exit. Either NO or 1 will be displayed. 2. To activate the Tilt inversion tap the UP or DOWN buttons VER - With this function you can display th

Resumen del contenido incluido en la página 6

DJ Scan 250 EX™ Operation DJ Scan 250 EX™ Operation Operating Modes: The DJ Scan 250 EX™ can operate in three Master-Slave Operation (Sound Active): This function will allow different modes. This next section will detail the differences in you to link up to 16 units together and operate without a controller. The the operating modes. units will be sound activated. In Master-Slave operation one unit will • Stand alone mode - act as

Resumen del contenido incluido en la página 7

DJ Scan 250 EX™ DMX Traits DJ Scan 250 EX™ Lamp Replacement Channel Value Function This fixture is fitted with a halogen lamp which is highly susceptible to damage if improperly han- 1 0 - 255 PAN dled. Never touch the lamp with your bare fingers 2 0 - 255 TILT as the oil from your hands will shorten lamp life. Also, never m

Resumen del contenido incluido en la página 8

DJ Scan 250 EX™ Cleaning DJ Scan 250 EX™ Protective Mirror Cover Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the A metal cover is provided to protect the scanner mirror during internal and external optical lenses and mirror should be carried out transportation and storage. The protective cover is held in place periodically to optimize light output. Cleaning frequency depends on by two thumb screws. the environment in which the fixt

Resumen del contenido incluido en la página 9

DJ Scan 250 EX™ Warranty DJ Scan 250 EX™ Notes MANUFACTURER’S LIMITED WARRANTY A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United State

Resumen del contenido incluido en la página 10

DJ Scan 250 EX™ Specifications Model: DJ Scan 250 EX™ Voltage*: 120v/60Hz or 230v/50Hz Lamp: LL ELC 24V 250W Dimensions: 17.25”(L) x 7.5”(W) x 6”(H) 437mm x 191mm x 150mm Colors: 11 + White Gobos: 10 + Spot Weight: 12 Lbs. / 5.2 kgs. Fuse: 7Amp (120v & 230v) Beam Angle: 15 Degree Duty Cycle: None DMX: 5 Channels Sound Active: Yes Working Position: Any Safe, Secure Position Warranty: 1 Year (365 days) *Voltage is preset at the factory an