Manual de instrucciones de Gianni Industries Keyprox Plus

Resumen del contenido incluido en la página 1

Keyprox Plus
Access Control System
Features Statement
The system is based on a controller
Controller supports two readers.
that supports two Secure Card readers
Controller can control 2 independent
which can be mounted up to 50 meters
doors or a single door.
from the controller with a simple 3-wire
Use RS-232 or RS-485 to connect a
connection. The controller can be
single controller to a PC.
configured to operate a single door or two
Up to 16 controllers can be connected
independent doors.
using

Resumen del contenido incluido en la página 2

2core 2core 2core 2core 2core 3core 3core 2core 2core 2core 2core Keyprox Plus Access Control System Application The KeyProx Plus controller has both a RS-232 and a RS-485 interface. Use the RS-232 interface for simple installation having a single controller and where the distance between the controller and the PC is less than 30 meters. The drawings below show typical RS-232 installations. RS-232 connection to PC - max 30m Single Door System 3core 2core RS-232 to PC 3core Door Sw 1 Door strike

Resumen del contenido incluido en la página 3

2core 2core 2core 2core Total Cable Length Max. 1000 meters Maximum of 16 Controllers Keyprox Plus Access Control System RS-485 must be used where the distance between the controller Multi-Controller System and the PC isgreater than 30 meters or for installations of multiple controllers. The PC will require a 311 Interface/Repeater to interface the RS-232 from the PC to the 311 RS-232/485 RS-485 of the controller network. The drawing below shows a interface typical RS-485 installation. Power sup