Manual de instrucciones de Wayne-Dalton THERMOSPAN 200-20

Resumen del contenido incluido en la página 1

W A Y N E - D A L T O N C O M M E R C I A L D O O R S Y S T E M S
®
T H E R M O S P A N
200-20
®
THERMOSPAN 200-20
SECTIONAL DOOR SYSTEMS
INSULATED SECTIONAL STEEL DOORS CUT YOUR TOTAL COST
®
Wayne-Dalton Thermospan 200-20 offers premium thermal efficiency com-
• PREMIUMTHERMAL QUALITIES
bined with a heavy-duty 20-gauge flush exterior surface. Featuring
(R-VALUE = 17.50,U-VALUE = 0.057)
continuous foamed-in-place insulation and a non-conductive thermal break
between the inner and outer skins, th

Resumen del contenido incluido en la página 2

SECTIONAL DOOR SYSTEMS ® T H E R M O S PA N 2 0 0 - 2 0 Joint seal prevents air infiltration The Thermospan 200-20 outperforms other and saves energy. conventional insulated steel doors in the area of energy efficiency.The Thermospan 200-20 offers a U-Value of .057 (R-value of 17.5) – a Thermal break separates inner and outer dramatic improvement over most conventional skins so virtually no heat or cold is conducted insulated steel doors, which typically have U-values through section. between .3

Resumen del contenido incluido en la página 3

STANDARD SIZES UP TO: 24’ 2” WIDE & 16’ 1” HIGH ENERGY EFFICIENCY VALUES: U = 0.057 R = 17.50 WINDLOAD: MEET OR EXCEED ANSI/DASMA 102-2003 IN ACCORDANCE WITH ASTM E-330-70. BEST APPLICATIONS: – Extra Heavy-Duty Applications – Where High Insulation Value Is Desired U.S. Patent Nos. 4238544 and 4339487 General Operating Clearances Headroom*** Sideroom** Depth Into Room Center Line of Springs Type 2" track 3" track 2" track 3" track 2" & 3" track 2" track 3" track 1 Standard Lift Manual12"R 12 ⁄2-1

Resumen del contenido incluido en la página 4

SECTIONAL DOOR SYSTEMS ® T H E R M O S PA N 2 0 0 - 2 0 Note to specifiers: Words in parentheses indicate frequently specified and highly recommended options. PART I – GENERAL 1.07 Delivery, Handling, Storage D. Counterbalance: 1.01 Section Includes A. Deliver products in manufacturer’s original containers, 1. Springs shall be torsion type,low-stress,helical A. Sectional overhead doors [manually] [motor] dry,undamaged,seals and labels intact. wound,oil-tempered spring wire to provide operated wi