Resumen del contenido incluido en la página 1
User manual
Dishwasher
ZDT 420
Resumen del contenido incluido en la página 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ 17 Control panel _ _ _ _ _ _ _ _ _
Resumen del contenido incluido en la página 3
Safety information In the interest of your safety and to ensure the ried out by inexperienced persons will cause correct use, before installing and first using the injury or serious malfunctioning. Contact appliance, read this user manual carefully, in- your local Service Force Centre. Always in- cluding its hints and warnings. To avoid sist on genuine spare parts. unnecessary mistakes and accidents, it is im- portant to ensure that all people using the General safety appliance are thoroughly fa
Resumen del contenido incluido en la página 4
or if the control panel, work top or plinth area Installation are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine. If your dishwasher is damaged con- hazard. tact your supplier. • All sides of the dishwasher must never be • All packaging must be removed before use. drilled to prevent damage to hydraulic and • Any electrical and plumb
Resumen del contenido incluido en la página 5
– activating/deactivating the audible signals, Setting mode the appliance MUST be in setting mode. Press the On/Off button; if indicator lights of the Press the On/Off button; If other button indica- programme selection buttons are illuminated tor lights are on and in the digital display is and on the digital display are visible two hori- visible the number of a programme (1 - 2 - 3 zontal lines the appliance is in setting mode. etc..), this means that a washing programme Always remember that wh
Resumen del contenido incluido en la página 6
Programme selection buttons • Starting the washing programme: 1. Press the On/Off button. 2. To select a programme, press either one of the two programme selection buttons, the indicator lights of the programme selection buttons start to flash and the number corresponding to the last performed washing programme will appear in the digital display. Using these two buttons you have an increasing ( ) or a decreasing ( ) order in the selection of the programme (see "Washing programmes" chart for the
Resumen del contenido incluido en la página 7
Delay start button This option allows the start of the programme to be delayed from 1 to 19 hours. After having selected the washing programme press the delay start button until the flashing number of the hours for the delay start will appear in the digital display. Close the dishwasher’s door, the countdown starts automatically. The opening of the door will not modify or interrupt the countdown . Once the countdown has elapsed the washing programme will start automatically. Cancel the delay sta
Resumen del contenido incluido en la página 8
Audible signals deactivated Deactivation/activation of the audible signals Audible signals activated 1. Press the On/Off button. The dishwasher 4. To change the setting, press function but- must be in setting mode. ton C again; the digital display will show the 2. Simultaneously press and hold function new setting. buttons B and C until the lights of function 5. 5. To memorize the operation, switch off buttons A, B and C start flashing. the dishwasher by pressing the On/Off but- 3. Press functio
Resumen del contenido incluido en la página 9
Programme Half load Degree of soil Type of load Programme de- scription 5 Yes Normal soil Crockery and cut- Prewash 4) Bio 50° lery Main wash 3) 1 intermediate rinse Final rinse Drying 6 No Normal soil Delicate crockery Main wash Glass 45° and glassware 1 intermediate rinse Final rinse Drying 7 No This is a programme both designed to heat 1 hot rinse Plate warmer plates before serving or remove dust from This programme dishes which have not been used for a long does not require the time. use of
Resumen del contenido incluido en la página 10
• Remove all packaging from inside the appli- Check whether these detergents are suitable ance for your water hardness. Follow the manufac- turers instructions. • Set the water softener – Set the water hardness to level 1. • Pour 1 litre of water inside the salt container and then fill with dishwasher salt IMPORTANT! • Fill the rinse aid dispenser If the drying results are not satisfactory we rec- ommend that you: When using tablets that 1. Fill up the rinse aid dispenser with rinse aid. integra
Resumen del contenido incluido en la página 11
Water hardness Adjusting the water hardness Use of salt setting Clarke °TH mmol/l manually electronically 64 - 88 91 - 125 9,0- 12,5 2 level 10 yes 53 - 63 76 - 90 7,6 - 8,9 2 level 9 yes 46 - 52 65 - 75 6,5 - 7,5 2 level 8 yes 36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes 28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes 23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes 18 - 22 26 - 32 2,6 - 3,2 1 level 4 yes 13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes 5 - 12 7 - 18 0,7 - 1,8 1 level 2 yes < 5 < 7 < 0,7 1 level 1 no The wat
Resumen del contenido incluido en la página 12
and a sequence of intermittent audible sig- changes. (For the selection of the new level nals are heard. see the chart). Examples: Examples: If the current level is 5, by displayed, 5 intermittent audible sig- pressing function button A once, level 6 is nals, pause, etc... = level 5 selected. displayed, 10 intermittent audible sig- If the current level is 10, by pressing func- nals, pause, etc... = level 10 tion button A once, level 1 is selected. 4. To change the level, press function butto
Resumen del contenido incluido en la página 13
IMPORTANT! Top up the special salt when the light on the control panel illuminates. Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. IMPORTANT! CAUTION! Top up the rinse aid when the light on the control panel Never fill the rinse aid dispenser with any other sub- illuminates. stances (e.g. dishwasher cleaning agent, liquid deter- gent). This would damag
Resumen del contenido incluido en la página 14
Open the lid. Set the dosage level. (The Close the lid and press un- dose is factory set in po- til it locks. sition 4). Load cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other. can absorb water may not be washed in the – To avoid damage to glasses, they must dishwasher. not touch. • Before loading the dishes, you should: – Lay small objects in the cutlery basket. – Remove all left over food and debr
Resumen del contenido incluido en la página 15
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother-of- • Only wash stoneware in the dishwasher if it is pearls handles. specially marked as being dishwasher-safe by the manufacturer. • Plastic items that are not heat resistant. • Glazed patterns may fade if machine washed • Older cutlery with glued parts that are not tempera- frequently. ture resistant. • Silver and aluminium parts have a tende
Resumen del contenido incluido en la página 16
The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up- them starting from the rear positions; tilting them must be loaded in the up- wards. slightly forwards and avoiding the front positions near per basket and arranged the door. so they do not move. Adjusting the height of the upper bas
Resumen del contenido incluido en la página 17
To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mecha- nism is engaged and the basket is stable. To lower the basket to the original position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. IMPORTANT! IMPORTANT! Never lift or lower the basket on one side only When the basket is in the h
Resumen del contenido incluido en la página 18
For programmes with pre- When using detergent Close the lid. wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. partmentB. cleaning power during short washing pro- Detergent tablets grammes. Therefore, please use long washing Detergent tablets from different manufacturers programmes when using detergent tablets, to dissolve at different rates. For this reason, ensure the complete removal of detergent some detergent tablets do not attain their full
Resumen del contenido incluido en la página 19
Clean filters A, B and C Turn the handle about 1/4 Remove filter A from the thoroughly under running turn anticlockwise and re- base of the washing com- water. move filters B and C. partment. Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle compartment and ensure clockwise to the stop. that it fits perfectly under the two guidesD. Cleaning the spray arms Internal cleaning Ensure that the seals around the door, the de- NEVER try to remove
Resumen del contenido incluido en la página 20
2. Leave the door ajar to prevent the forma- 1. Unplug it. tion of any unpleasant smells. 2. Turn the water tap off. 3. Leave the inside of the machine clean. 3. Remove the water inlet and discharge ho- ses. Frost precautions 4. Pull the machine out together with the ho- ses. Avoid placing the machine in a location where Avoid over tilting the machine during transpor- the temperature is below 0°C. If this is tation. unavoidable, empty the machine, close the ap- pliance door, disconnect the water
