Resumen del contenido incluido en la página 1
User manual
Dishwasher
ZDT 6454
Resumen del contenido incluido en la página 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appli- ance. Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ 16 Control panel _ _ _ _ _ _ _
Resumen del contenido incluido en la página 3
Safety information • Under no circumstances should you attempt In the interest of your safety and to ensure the to repair the machine yourself. Repairs car- correct use, before installing and first using the ried out by inexperienced persons will cause appliance, read this user manual carefully, in- injury or serious malfunctioning. Contact cluding its hints and warnings. To avoid unnec- your local Service Force Centre. Always in- essary mistakes and accidents, it is important sist on genuine sp
Resumen del contenido incluido en la página 4
or if the control panel, work top or plinth area Installation are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine. If your dishwasher is damaged con- hazard. tact your supplier. • All sides of the dishwasher must never be • All packaging must be removed before use. drilled to prevent damage to hydraulic and • Any electrical and plumb
Resumen del contenido incluido en la página 5
• the setting of the water softener, • Press On/Off button, ONLY a programme button is illuminated = last performed or se- • deactivation/activation of the audible sig- lected programme still set. nals. In this case, to return to setting mode, the IMPORTANT! programme has to be cancelled. Setting mode To cancel a set programme or a programme in progress; simultaneously press function but- Always remember that when: tonsB and C, until ALL programme button lights – setting the water softener, are
Resumen del contenido incluido en la página 6
Audible signals Audible signals have been introduced to help 3. Press function button C, the lights of func- indicate which operations the dishwasher is tion buttons A and B turn off while the light performing: of function button C goes on flashing. At the same time the end of programme in- • setting the water softener, dicator light illuminates indicating that the • end of the programme, audible signals are active. • intervention of an alarm due to malfunction. 4. To deactivate teh audible sign
Resumen del contenido incluido en la página 7
4. Press the button corresponding to the re- Attention! Hot steam may escape when the quired programme (see "Washing pro- door is opened. Open the door carefully. grammes" chart). Interrupt a washing programme in pro- When a programme has been selected the gress: corresponding light will illuminate. • Open the dishwasher door; the programme 5. Close the dishwasher door, the pro- will stop. Close the door; the programme will gramme starts automatically. start from the point at which it was interr
Resumen del contenido incluido en la página 8
IMPORTANT! plugged and the water tap turned off. When the washing programme has finished, it is recommended that the dishwasher is un- Washing programmes Programme Degree of soil Type of load Programme descrip- tion Intensive 70° Heavy soil Crockery, cutlery, pots Prewash and pans Main wash 2 intermediate rinses Final rinse Drying Normal 65° Normal soil Crockery, cutlery, pots Prewash and pans Main wash 1 intermediate rinses Final rinse Drying Light soil Crockery and cutlery Main wash Final rins
Resumen del contenido incluido en la página 9
First use Check whether these detergents are suitable Before using your dishwasher for the first time: for your water hardness. Follow the manufac- • Ensure that the electrical and water connec- turers instructions. tions comply with the installation instructions – Set the water hardness to level 1. • Remove all packaging from inside the appli- IMPORTANT! ance • Set the water softener If the drying results are not satisfactory we rec- ommend that you: • Pour 1 litre of water inside the salt cont
Resumen del contenido incluido en la página 10
The softener should be adjusted according to local Water Authority can advise you on the the hardness of the water in your area. Your hardness of the water in your area. Water hardness Adjusting the water hardness Use of salt setting °dH °TH mmol/l manually electronically 51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes 43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes 37 - 42 65 - 75 6,51 - 7,5 2 level 8 yes 29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes 23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes 19 - 22 33 - 39 3,3 - 3
Resumen del contenido incluido en la página 11
1. Press the On/Off button. The dishwasher 5 flashes / 5 intermittent audible signals, must be in setting mode. pause, etc...= level 5 6 flashes / 6 intermittent audible signals, 2. Simultaneously press and hold function pause, buttons B and C until the lights of the func- 6 flashes / 6 intermittent audible signals, tion buttons A, B and C start flashing. pause, etc...= level 6 3. Press function button A, the lights function 4. To change the level press the function but- buttons B and C turn off
Resumen del contenido incluido en la página 12
Unscrew the cap. Only before filling with Using the funnel provi- salt for the first time, fill ded, pour in the salt until the salt container with the container is filled with water. salt. IMPORTANT! Immediately start a complete programme. IMPORTANT! Water will overflow from the container as salt is add- ed. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Top up the special salt when the light on the control panel illuminates. 12
Resumen del contenido incluido en la página 13
Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling which overflows. Close is indicated by "max" the lid and press until it locks. IMPORTANT! CAUTION! Top up the rinse aid when the light on the control panel Never fill the rinse aid dispenser with any other sub- illuminates. stances (e.g. dishwasher cleaning agent, liquid de- tergent). This would damage the appliance. Adjusting the dosage of rinse aid Increase the dose if there are dr
Resumen del contenido incluido en la página 14
Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each other. can absorb water may not be washed in the – To avoid damage to glasses, they must dishwasher. not touch. • Before loading the dishes, you should: – Lay small objects in the cutlery basket. – Remove all left over food and debris. • Plastic items and pans with non stick coat- – Soften remnants of burnt food in pans ings have a tendency to reta
Resumen del contenido incluido en la página 15
Load cutlery. For best re- Place knives and other Load the lower basket. Arrange serving dishes and sults we recommend you items of cutlery with large lids around the edge of the basket. to use the cutlery grid sharp points or edges provided (if the size and with their handles facing dimensions of the cutlery upwards. Risk of injury! allow it) Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up-
Resumen del contenido incluido en la página 16
IMPORTANT! When the basket is in the higher position you will not be able to use the cup racks. Move the front runner Refit the basket in the stops (A) of the upper bas- higher position and re- ket outwards and slide the place the stops (A) in their basket out. original position. Use of detergent IMPORTANT! Observe the manufacturer’s dosing and stor- age recommendations. Only use detergents suitable for dishwashers. Open the lid. Fill in the detergent in Observe the dosing lev- compartment A. el
Resumen del contenido incluido en la página 17
For programmes with When using detergent Close the lid. prewash add an addition- tablets: place detergent al detergent dose in com- tablets in compartment partmentB. A. Unloading the dishwasher • Hot dishes are sensitive to knocks. • Water may appear on the sides and the door The dishes should therefore be allowed to of the dishwasher as the stainless steel will cool down before removing from the appli- eventually become cooler than the dishes. ance. CAUTION! • Empty the lower basket first
Resumen del contenido incluido en la página 18
Clean filters A, B and C Turn the handle about 1/4 Remove filter A from the thoroughly under running turn anticlockwise and base of the washing water. remove filters B and C. compartment. Put the flat filter A back in Replace the filters and the base of the washing lock by turning the handle compartment and ensure clockwise to the stop. that it fits perfectly under the two guidesD. Cleaning the spray arms Internal cleaning Ensure that the seals around the door, the de- NEVER try to remove the
Resumen del contenido incluido en la página 19
2. Leave the door ajar to prevent the forma- 1. Unplug it. tion of any unpleasant smells. 2. Turn the water tap off. 3. Leave the inside of the machine clean. 3. Remove the water inlet and discharge ho- ses. Frost precautions 4. Pull the machine out together with the ho- ses. Avoid placing the machine in a location where Avoid over tilting the machine during transpor- the temperature is below 0°C. If this is unavoid- tation. able, empty the machine, close the appliance door, disconnect the water
Resumen del contenido incluido en la página 20
Something not working The dishwasher will not start or stops during solved with the help of the indications described operation. in the chart, without calling out an engineer. Certain problems are due to the lack of simple Switch off the dishwasher and carry out the fol- maintenance or oversights, which can be lowing suggested corrective actions. Fault code and malfunction Possible cause and solution • 1 intermittent audible signal • The water tap is blocked or furred with limescale. Clean the w
