Resumen del contenido incluido en la página 1
User manual
Dishwasher
ZDT40
Resumen del contenido incluido en la página 2
Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user manual should be passed on to any future owner of the appliance. Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ 14 Control panel _ _ _ _ _ _ _ _
Resumen del contenido incluido en la página 3
Safety information In the interest of your safety and to ensure the ried out by inexperienced persons will cause correct use, before installing and first using the injury or serious malfunctioning. Contact appliance, read this user manual carefully, in- your local Service Force Centre. Always in- cluding its hints and warnings. To avoid sist on genuine spare parts. unnecessary mistakes and accidents, it is im- portant to ensure that all people using the General safety appliance are thoroughly fa
Resumen del contenido incluido en la página 4
or if the control panel, work top or plinth area Installation are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine. If your dishwasher is damaged con- hazard. tact your supplier. • All sides of the dishwasher must never be • All packaging must be removed before use. drilled to prevent damage to hydraulic and • Any electrical and plumb
Resumen del contenido incluido en la página 5
the appliance MUST be in setting mode. Setting mode If a programme light is illuminated and End of The appliance is in setting mode when all programme light is illuminated with fixed light, programme lights are off and End of pro- the last performed programme is still set. gramme light flashes. In this case the programme has to be cancelled: 1. Press and hold the Programme selection/ IMPORTANT! Cancel button until the light of the running Always remember that when performing opera- programme tur
Resumen del contenido incluido en la página 6
Indicator lights End of programme indicator light Illuminates when the washing programme has ended. It also has added functions of visual signalling as: – the setting of the water softener, – deactivation/activation of the audible signals, – intervention of an alarm due to the malfunction of the machine. Audible signals Audible signals have been introduced to help 4. After a few seconds: indicate which operations the dishwasher is – programme light A turns off performing. – programme light B go
Resumen del contenido incluido en la página 7
Washing programmes Programme Degree of soil Type of load Programme description Normal soil Crockery, cutlery, pots Prewash and pans Main wash 1 intermediate rinses 65° Final rinse Drying Light soil Crockery and cutlery Main wash Final rinse 1) 30' Normal soil Crockery and cutlery Prewash Main wash 50° 2) 1 intermediate rinse Final rinse Drying Any. 1 cold rinse (to avoid food Partial load (to be completed later in the day). scraps from sticking together). This programme does not require the use
Resumen del contenido incluido en la página 8
1. Fill up the rinse aid dispenser with rinse aid. When using tablets that 2. Set the rinse aid dosage to position 2. integrate rinse aid, detergent, If you decide in future to use separated deter- salt function and other gents, we advise that you: additives: – Fill up the salt and rinse aid container. – Adjust the water hardness setting to the there is no need to fill up with special salt or rinse aid. highest level and perform 1 normal washing Check whether these detergents are suitable progra
Resumen del contenido incluido en la página 9
Water hardness Adjusting the water hardness Use of salt setting Clarke °TH mmol/l manually electronically 18 - 22 26 - 32 2,6 - 3,2 1 level 4 yes 13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes 5 - 12 7 - 18 0,7 - 1,8 1 level 2 yes < 5 < 7 < 0,7 1 level 1 no The water softener must be set in both ways: manually, using the water hardness dial and electronically. Setting the water softener manually (see table) The water softener is factory set at position 2. Set switch to position 1 or 2 – End of programm
Resumen del contenido incluido en la página 10
Use of dishwasher salt CAUTION! Use only special salt suitable for dishwashers. Unscrew the cap. Only before filling with Using the funnel provided, salt for the first time, fill pour in the salt until the the salt container with wa- container is filled with salt. ter. IMPORTANT! Immediately start a complete programme. IMPORTANT! Water will overflow from the container as salt is added. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. 10
Resumen del contenido incluido en la página 11
IMPORTANT! The salt container will require topping up periodically. The salt cap has a refill indicator window in the centre in which a green float is clearly visible when there is salt inside the container and almost disappears when the salt has finished. Filling with rinse aid Open the lid. Fill up with rinse aid. The Clean up any rinse aid maximum level for filling is which overflows. Close indicated by "max" the lid and press until it locks. CAUTION! Never fill the rinse aid dispenser with a
Resumen del contenido incluido en la página 12
Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks on lime spots on the dishes after washing. the dishes or a bluish film on glassware or knife blades. Open the lid. Set the dosage level. (The Close the lid and press un- dose is factory set in po- til it locks. sition 4). Loading cutlery and dishes – Dishes and items of cutlery must not lie Sponges, household cloths and any object that inside one another, or cover each
Resumen del contenido incluido en la página 13
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother-of- • Only wash stoneware in the dishwasher if it is pearls handles. specially marked as being dishwasher-safe by the manufacturer. • Plastic items that are not heat resistant. • Glazed patterns may fade if machine washed • Older cutlery with glued parts that are not tempera- frequently. ture resistant. • Silver and aluminium parts have a tende
Resumen del contenido incluido en la página 14
Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up- them starting from the rear positions; tilting them must be loaded in the up- wards. slightly forwards and avoiding the front positions near per basket and arranged the door. so they do not move. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper bas- ket to the hi
Resumen del contenido incluido en la página 15
Use of detergent IMPORTANT! Observe the manufacturer’s dosing and stor- age recommendations. Only use detergents suitable for dishwashers. Open the lid. Fill in the detergent in Observe the dosing lev- compartment A. els. For programmes with pre- When using detergent Close the lid. wash add an additional tablets: place detergent detergent dose in com- tablets in compartment A. partmentB. cleaning power during short washing pro- Detergent tablets grammes. Therefore, please use long washing Dete
Resumen del contenido incluido en la página 16
• Water may appear on the sides and the door CAUTION! of the dishwasher as the stainless steel will When the washing programme has finished, it eventually become cooler than the dishes. is recommended that the dishwasher is un- plugged and the water tap turned off. Care and cleaning Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results. Clean filters A, B and C Turn the handle about 1/4
Resumen del contenido incluido en la página 17
1. Unplug the appliance and then turn off the Cleaning the spray arms water. NEVER try to remove the spray arms. 2. Leave the door ajar to prevent the forma- tion of any unpleasant smells. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. 3. Leave the inside of the machine clean. External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If th
Resumen del contenido incluido en la página 18
household waste disposal service or the shop CAUTION! where you purchased the product. When a unit is no longer being used: • Pull the plug out of the socket. Packaging material • Cut off the cable and plug and dispose of The packaging materials are environmentally them. friendly and can be recycled. The plastic com- • Dispose of the door catch. This prevents ponents are identified by markings, e.g. >PE<, children from trapping themselves inside >PS<, etc. Please dispose of the packaging and
Resumen del contenido incluido en la página 19
Fault code and malfunction Possible cause and solution The programme does not start. • The dishwasher door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the mains plug. • The fuse has blown in the household fuse box. Replace the fuse. Once these checks have been carried out; Contact your local Service Force Centre, quot- switch on the dishwasher. The programme will ing the model (Mod.), product number (PNC) continue from the point at which it was inter-
Resumen del contenido incluido en la página 20
The wash results are not satisfactory There are streaks, milky spots or a bluish coating on • Decrease rinse aid dosing. glasses and dishes Water drops have dries onto glasses and dishes • Increase rinse aid dosing. • The detergent may be the cause. Contact the de- tergent manufacturer’s consumer care line. If after all these checks, the problem persists, contact your local Service Force Centre. Consumption values The consumption values are intended as a iations of the power supply and the amoun
