Manual de instrucciones de Philips MCD139/79

Resumen del contenido incluido en la página 1

1
Quick Start Guide
2
User Manual
MCD139
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
DISC AUX TUNER DISPLAY
OSD
MODE SLEEP/TIMER
A-B CLOCK
SYSTEM MENU DISC MENU
OK
CR2025
AUDIO MUTE
+
VOL
GOTO
1 2 3
4 5 6 ZOOM
7 8 9 DSC
PROG 0 SUBTITLE DBB
Remote control with one
Remove the insulation plastic tab
Composite video cable DIN cable
CR2025 battery loaded before use
FM wire antenna
Quick start guide User manual
MCD139_79_QSG_Eng 1 21/7/06, 17:56

Resumen del contenido incluido en la página 2

1 Connect the speaker wires of the right speaker and subwoofer to the Important! left speaker. – This set can only be operated after the supplied DIN cable has been connected. 2 Connect the supplied FM wire antenna. Tips – See the User Manual for other TV 3 connection options. Connect the left speaker and the DVD player by using the supplied –For connecting to a Progressive Scan DIN cable. TV, refer to the user manual for proper connections and detailed setup. 4 Connect the DVD player to your TV

Resumen del contenido incluido en la página 3

Setting the clock CLOCK DISC AUX TUNER DISPLAY 1 OSD A-B MODE CLOCK SLEEP/TIMER In standby or power on mode, press and hold CLOCK on the remote control. SYSTEM MENU DISC MENU The clock digits flash on the display. 2 OK Press ¡ / ™ repeatedly to set the hours. AUDIO MUTE 3 + VOL Press à / á repeatedly to set the minutes. 1 2 3 GOTO 4 5 6 ZOOM 4 7 8 9 DSC Press CLOCK again to store the setting. PROG SUBTITLE DBB 0 Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but

Resumen del contenido incluido en la página 4

Playing a disc 1 7 1 8 2 Push OPEN /CLOSEç to open the disc door. 9 3 0 2 ! 4 Load in a disc with the label side facing up, then close the disc door. 5 6 To switch on the system, 3 press STANDBY ONB/ Playback will start automatically. If not, pressÉÅ. SOURCE on the set, or DISC/TUNER/AUX on the remote. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source (FM). 2 Press PROGRAM on the set for more than two seconds to prog