Manual de instrucciones de Metra Electronics 99-5716

Resumen del contenido incluido en la página 1

KIT FEATURES
5
ISO-DIN
head unit
provisions
99-5716
Incorporates
Fig. A
INSTALLATION
factory climate
controls into
INSTRUCTIONS
installation
(located under
the rear deck)
Fig. B
KIT COMPONENTS
APPLICATIONS
Open the trunk, remove (4) pop-clips from the driver's side trunk liner and remove the liner.
CAR PAGE
(see Fig. A). Locate the factory tuner on the wall of the trunk and disconnect the speaker and
FORD
antenna plugs (it is NOT necessary to remove the tuner). (see Fig. B). Plug th

Resumen del contenido incluido en la página 2

3 ALL VEHICLES Fig. B 1 Fig. A Remove (2) torx-head screws securing the mounting clips to the sides of the factory radio/climate control panel and remove the clips. (see Fig. A). Mount the clips to the Integrated Mounting Kit with the same torx-head screws. (see Fig. B) Disconnect the negative battery terminal to prevent an accidental short circuit. Using Metra's 86-5618, pull the factory radio/climate control panel from the dash. Disconnect the audio system connectors, blower motor switc