Manual de instrucciones de Canon MX410

Resumen del contenido incluido en la página 1

Dedicated Fax Line
Setup Guide
MX360 or MX410
Next

Resumen del contenido incluido en la página 2

Connecting The Phone Lines Previous Next

Resumen del contenido incluido en la página 3

Connecting The Phone Lines Before Wall jack After Wall jack (Phone Cord included with Canon printer) Next Previous 3

Resumen del contenido incluido en la página 4

If Your Wall Plate Has Two Jacks Use the jack that supports the fax line. Previous Next 4

Resumen del contenido incluido en la página 5

If Your Wall Plate Has One Jack For Two Lines If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third jack (L1+L2) allows access to both lines. Thi

Resumen del contenido incluido en la página 6

Fax to Phone Line Connection First, connect one end of the supplied telephone cord to the telephone jack on the wall. Wall Jack (Phone Cord included with Canon printer) Previous Next 6

Resumen del contenido incluido en la página 7

Fax to Phone Line Connection Next, connect the other end of the supplied telephone cord to the lower jack (labeled “L”) on the MX360 or MX410. Wall Jack (Phone Cord included with Canon printer) Previous Next 7

Resumen del contenido incluido en la página 8

Setting Up The Receive Mode Previous Next

Resumen del contenido incluido en la página 9

Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next 9

Resumen del contenido incluido en la página 10

Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next 10

Resumen del contenido incluido en la página 11

Step 5 Step 6 Press the OK button The “Receive mode set” screen will appear Previous Next 11

Resumen del contenido incluido en la página 12

Step 7 Step 8 Use the Left or Right arrow button Ensure that “Fax only mode” is to select “Fax only mode” displayed Previous Next 12

Resumen del contenido incluido en la página 13

Step 9 Step 10 Press the OK button The “Make advanced settings?” screen will appear Previous Next 13

Resumen del contenido incluido en la página 14

Step 11 Step 12 Press the FAX button Your MX360 or MX410 is now set to FAX only mode. Notice that the mode is listed on the fax standby screen. Previous Next 14

Resumen del contenido incluido en la página 15

To Receive A Fax When a call comes in on the fax line, the MX360 or MX410 will answer the call and begin receiving the fax. You do not have to be home or interact with the MX360 or MX410 to receive a fax. Previous 15