Resumen del contenido incluido en la página 1
AKPro system with ATH1
transport shown
Planar Model A480-PL
Professional Grade
Home Cinema Conversion Lens System
USER MANUAL AND INSTALLATION GUIDE
Including the UH480 Lens, ATH1 Transport
and AKPro Projector Attachment Kits
As of February, 2009
Introduction, Basic projection parameters 2
Using the AKPro Attachment Kit 2
Important ceiling mount location considerations 3
Package Contents 4
Attachment Plate Diagram 6
Connecting the AK
Resumen del contenido incluido en la página 2
INTRODUCTION Thank you for purchasing the Planar A480-PL lens system – the world’s leading model anamorphic lens system designed to dramatically enhance today’s high performance 16:9 projectors when showing the true widescreen aspect ratio of most major motion pictures. The A480-PL lens system includes the UH480 Lens and ATH1 automated transport to provide the optimum performance when viewing all wide screen content. The ATH1 transport can be mounted to your ceiling, to an improvised
Resumen del contenido incluido en la página 3
USING the AKPro ATTACHMENT KIT The AKPro includes a high performance, rigid, solid steel plate specifically designed to attach to a properly installed ceiling mount head made by Chief Manufacturing (for use with the PD8130/8150) or Premier (for use with the PD8130/8150 and Viper), which may then be further installed to the ceiling using a variety of standard Chief or Premier mounting components. These components are not included in the kit but are available. The ceiling mounts and
Resumen del contenido incluido en la página 4
PACKAGE CONTENTS AKPro attachment plate, AKPro attachment bag (hardware, spacers), plate hook bag (chain, hooks, hardware) Transport, transport mounting hardware, lens bracket mounting hardware, power supply, Panamorph remote, batteries Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 4
Resumen del contenido incluido en la página 5
Panamorph lens and mounting bracket Chief RPA ceiling mount (PD81xx use only) Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 5
Resumen del contenido incluido en la página 6
Top View (this side towards ceiling) Front H 7 13 11 3 11 6 6 15 Ceiling side of 1 13 Attachment Plate H H 8130/8150 8130/8150 7170 7170 8130/8150 8130/8150 7170 7170 Rear Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 6
Resumen del contenido incluido en la página 7
PD8130/PD8150 installation instructions CONNECTING THE AKPro ATTACHMENT PLATE (Chief RPA mount and Phillips screwdrivers required) 1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate Diagram for plate orientation, mounting hole locations and required screws and spacers for the PD8130 or PD8150. Insert and tighten each M4x30 screw through an appropriate silver washer and lock washer, the designated holes in the Attachment Plate, then through the 5/8”
Resumen del contenido incluido en la página 8
MOUNTING THE ATH1 TRANSPORT 1. DO NOT CONNECT POWER TO THE TRANSPORT AT THIS TIME. ATH1/M380 Attachment Bag Contents 2. Position the flat side of the motorized transport against the bottom Pivot screw as #10-32x5/8” screw (1) assembled side of the Attachment Plate so that the transport logo is toward the screen and #10-32 nut (1) the center “M” hole in the Attachment Attachment #10-32 lock washer (1) Plate Plate is aligned with the front recessed transport hole. Insert t
Resumen del contenido incluido en la página 9
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 9
Resumen del contenido incluido en la página 10
If the lens must be removed for any length of time it is recommended that a similar weight be suspended from the front of the attachment kit to balance the weight of the projector. This will minimize unusual stresses on the ceiling mount system. Proceed to “Final Adjustments” later on in this manual. Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 10
Resumen del contenido incluido en la página 11
Viper (PD7170) installation instructions CONNECTING THE AKPro ATTACHMENT PLATE AND CEILING MOUNT (Planar/Premier PDS mount P/N 997-5351-00 and Phillips screwdrivers required) 1. Position the projector bottom-up on a soft surface. Consult the Attachment Plate Diagram for plate orientation, mounting hole locations and required screws and spacers for the Viper. Align the bottom part of the Planar/Premier PDS mount with the attachment plate holes and insert and tighten each M4x30 scre
Resumen del contenido incluido en la página 12
VIPER (PD7170) ATTACHMENT SECURITY HOOK ATTACHMENT (Phillips screwdrivers, pliers, scissors and appropriate ceiling hooks required) Plate Hook Bag Contents (AK6 only) #8-32 Wire Hook (2) #8-32 Nut (4) Ceiling side #8 Washer (4) M4 Lock Washer (2) Plate Hook 3/16” Chain (6 feet) Chain End (4) as assembled to Attachment Plate Ceiling Mount Attachment 1. Install the Plate Hook Assemblies in the two “H” Screws adapter holes of the Attachment Plate (see diagram) with th
Resumen del contenido incluido en la página 13
MOUNTING THE ATH1 TRANSPORT 1. DO NOT CONNECT POWER TO THE TRANSPORT AT THIS TIME. ATH1/M380 Attachment Bag Contents 2. Position the flat side of the motorized transport against the bottom Pivot screw as #10-32x5/8” screw (1) side of the Attachment Plate so that the assembled transport logo is toward the screen and #10-32 nut (1) the center “M” hole in the Attachment Attachment #10-32 lock washer (1) Plate Plate is aligned with the front recessed transport hole. Insert the
Resumen del contenido incluido en la página 14
ATTACHING THE PROJECTOR TO THE CEILING MOUNT Follow the instructions included in the PDS mount to securely attach it to the ceiling Attach the projector to the ceiling mounted portion of the PDS mount Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 14
Resumen del contenido incluido en la página 15
Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 15
Resumen del contenido incluido en la página 16
FINAL ADJUSTMENTS (ALL INSTALLATIONS) 1. Turn the projector on with the UH480 Lens out of the projector beam. Set the horizontal lens shift to neutral (if a feature of your projector) and then adjust the ceiling mount so that the 16:9 image is in the exact center of and square to the screen, with a similar amount of image slightly over the top and bottom screen borders. If the projector lens is not in the exact horizontal center of the screen you may need to use a little horizontal lens
Resumen del contenido incluido en la página 17
Programming Connect the included power adapter to the power input and connect a 3.5mm mini jack to 3.5mm mini jack cord that is long enough to reach from the Panamorph transport motor to the rear of the Planar projector (not included) to the “+12V Trigger In” on the Panamorph transport motor Plug the other end of the 3.5mm mini jack into one of the two 12V triggers located on the rear panel of the projector. With the lens in the “out” position, bring up the projector m
Resumen del contenido incluido en la página 18
Now when the aspect on the projectors aspect ratio is changed to “Letterbox”, the 12V trigger will activate and the Panamorph lens transport will position the Panamorph lens in front of the projectors primary lens. Planar A480-PL User Manual and Installation Guide, Version 2.3, copyright 2009, all rights reserved, Planar Inc. Page 18
Resumen del contenido incluido en la página 19
Aspect Ratio Matrix Native Source Projector Aspect and Resulting Aspect Aspect 12V trigger Setting with on Screen Panamorph Lens 16:9 4:3 16:9 16:9 letterbox Letterbox 2.35:1 4:3 4:3 Narrow 4:3 You can program the projector control the lens and screen mask for one resize mode, such as 16:9 letterbox to 2.35:1, or leave the Panmorph lens in front of the lens all the time and adjust the aspect raito per source type. CLEANING In most applications lenses do not need very much
