Resumen del contenido incluido en la página 1
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 1
List of Parts
Once you have unpacked your TV, check to make sure that you
Accessories
have all the parts shown here. If any piece is missing or broken,
call your dealer.
Remote Control (BN59-00462A) / Power Cord Anynet Cable
Owner’s Instructions
AAA Batteries (3903-000144) (BN39-00518A)
BN68-00766E-00
English-1
Resumen del contenido incluido en la página 2
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 2 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Plug the antenna lead into the ANT 2 IN (AIR IN) 1 on the TV. Use the antenna cable, an accessory included in the product package. Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Ca
Resumen del contenido incluido en la página 3
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 3 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the cable that is 1 connected to the ANTENNA IN terminal of your Cable box. This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. Connect this cable to a two-way split
Resumen del contenido incluido en la página 4
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 4 Connecting CableCARD You must obtain a CableCARD from a local cable service provider. TV Power cord From cable TV Please insert the card as shown. Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” 1 is displayed on the screen. If the channel information does not exist, the message “Updating Channel List” is displayed during channel information configuration. It could take several minutes to update the channel inf
Resumen del contenido incluido en la página 5
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 5 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect the Video/Audio TV cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. VCR (Note: For better video, use Power cord an S-Video cable.) • Please be sure to match the color coded input terminals and cable jacks. Audio cable Video cable S-Video cable Connecting a Camcorder Viewing camcorder tapes Connect a Video
Resumen del contenido incluido en la página 6
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 6 Connecting a DVD Player (480i, 480p) Playing DVD TV DVD Player Power cord Component cable Audio cable Connect the Y, PB, PR (COMPONENT1, 2) input jacks on the TV to the Y, PB, PR output jacks 1 on the DVD player using a component cable. Connect the AUDIO L/R (COMPONENT1, 2) input jacks on the TV to the AUDIO output jacks 2 on the DVD player using a audio cable. • Please be sure to match the color coded input terminals and cable jacks. English-6
Resumen del contenido incluido en la página 7
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 7 Connecting a DTV Receiver (480p, 720p, 1080i) This TV displays the optimum picture in 720p mode. Watching DTV TV DTV Receiver Power cord Component cable Audio cable HDMI/DVI cable Connect the cable or antenna to the antenna input jack on the DTV. 1 Connect the Y, PB, PR (COMPONENT1, 2) or HDMI input jack on the TV to the Y, PB, PR or DVI output 2 jacks on the DTV receiver using a component or HDMI/DVI cable. Connect the AUDIO L/R (COMPONENT1, 2 or
Resumen del contenido incluido en la página 8
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 8 Connecting to HDMI (High Definition Multimedia Interface) (480p, 720p, 1080i) Watching DTV Connect the cable or TV 1 antenna to the antenna input jack on the DTV. Connect the HDMI 2 input jack on the TV Power cord with the HDMI output HDMI cable jack on the DTV DTV Set-Top Box Set-Top Box using an HDMI cable. • Please make sure the HDMI source’s power is on before selecting HDMI from the “Source List” on the TV. Connecting a Digital TV Set-Top Bo
Resumen del contenido incluido en la página 9
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 9 Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. TV Power cord Digital Audio System Coaxial cable Optical cable If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack 1 on the TV. If your audio system has a optical digital audio input, co
Resumen del contenido incluido en la página 10
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 10 Connecting to an Analog Amplifier The “AUDIO OUT TV 1 (AUDIO L/R)” terminals cannot be used for external speakers. You must hook them up to an amplifier. When an audio amplifier is Power cord connected to the “AUDIO OUT (AUDIO L/R)” Audio cable terminals: Decrease the gain (volume) of the audio amplifier, and adjust the volume level with the volume control on the TV. Analog Amplifier Connecting a PC Connection to a Macintosh computer may requi
Resumen del contenido incluido en la página 11
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 11 Remote Control Buttons Remote Control Œ POWER button ¿ P.MODE button Adjust the TV picture by selecting Turns the TV on and off. one of the preset factory settings (or ´ GUIDE button select your personal, customized Press to display the on-screen picture settings). Electronic Program Guide (EPG). ¸ S.MODE button ˇ ANTENNA button Select Sound effect. Press to select “Air” or “Cable”. ˛ E.SAVING button ¨ Number buttons Press to adjust screen bright
Resumen del contenido incluido en la página 12
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 12 Turning the TV On and Off Press the POWER button on the remote control. The TV will be turned on and you will be able to use its features. You can also use the Power button on the front of the TV. • If your TV isn’t turned on when the power button is pressed: Press the MODE button to check if the TV mode has been chosen. Viewing the Menus and Displays Your TV has a simple, easy-to-use menu system that appears on the TV screen. This system makes
Resumen del contenido incluido en la página 13
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 13 Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting cha
Resumen del contenido incluido en la página 14
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 14 When selecting Cable TV system : Press the ▲ or ▼ button to select “Cable” or “Air + Cable”, TV Auto Program then press the ENTER button. Select the cable system. Digital Channel : STD √ Analog Channel : STD √ Start Move Enter Return Press the ▲ or ▼ button to select “Digital Channel”, then TV Auto Program press the ENTER button. Select the cable system. Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”, Digital Channel : STD STD press th
Resumen del contenido incluido en la página 15
BN68-00766E-00Eng_0214 2/14/05 1:48 PM Page 15 Storing Channels in Memory Press the ▲ or ▼ button to select the antennas to TV Auto Program 4 memorize. Press the ENTER button to select “Start”. Select the antennas to memorize Air Start Cable Start Air + Cable Start Move Enter Return In Air, press the ENTER button to start the auto TV Auto Program 5 program. In Cable or Air + Cable, press the ENTER Select the cable system. button to select the cable system. Digital Channel : STD
Resumen del contenido incluido en la página 16
BN68-00766E-00Eng_0214 2/14/05 5:28 PM Page 16 TV Source List Press the ▲ or ▼ button to select signal source, then 3 press the ENTER button. TV AV : ---- S-Video : ---- Component 1 : ---- Component 2 : ---- Press the MENU button to exit. PC : ---- 4 HDMI : ---- Move Enter Return • When you connect equipment to the TV, you can choose between the following sets of jacks: AV, S-VIDEO, COMPONENT 1, COMPONENT 2, PC, or HDMI on the TV’s rear panel. • HDMI input can only be selected when the exter
