Resumen del contenido incluido en la página 1
01_E_7473.book 1 ページ ２００６年９月６日 水曜日 午後２時３６分
USER’S MANUAL
WIDE PLASMA DISPLAY
P42HTA51E SERIES
P50XTA51E SERIES
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions
(see the separate "Safety Precautions" manual).
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Co
Resumen del contenido incluido en la página 2
01_E_7473.book 2 ページ ２００６年９月６日 水曜日 午後２時３６分 CONTENTS INFORMATION ................................................................E-3 Ambient Sensor ..................................................................E-20 Picture Mode .......................................................................E-20 ACCESSORIES ....................................................................E-4 Color Temp. ........................................................................E-21 ATTACHING THE FERR
Resumen del contenido incluido en la página 3
01_E_7473.book 3 ページ ２００６年９月６日 水曜日 午後２時３６分 INFORMATION • Receptacle Make sure that the power cord’s grounding wire is grounded. The plasma display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information. • Have the plasma display inspected and cleaned by your dealer at regular intervals. • Do not display the same picture for a long time, because part of the
Resumen del contenido incluido en la página 4
01_E_7473.book 4 ページ ２００６年９月６日 水曜日 午後２時３６分 INFORMATION (Continued) ACCESSORIES Safety This manual Remote control AA battery (2) Power cable Spacer (4) Precautions Manual Manual Large ferrite Small ferrite core core (2) ATTACHING THE FERRITE CORES Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Conta
Resumen del contenido incluido en la página 5
01_E_7473.book 5 ページ ２００６年９月６日 水曜日 午後２時３６分 INSTALLATION • To prevent the plasma display’s internal components from overheating, make sure that the plasma display is installed in a well-ventilated location. • Be sure to use the optional stand, wall-mounting unit or the other mounting unit when installing the plasma display. Also, be sure that your dealer performs the installation. • See the appropriate instruction manual for additional information on the mounting hardware you select. • To pr
Resumen del contenido incluido en la página 6
01_E_7473.book 6 ページ ２００６年９月６日 水曜日 午後２時３６分 PART NAMES AND FUNCTIONS DISPLAY SECTION – FRONT Input mode selection button Switches the input modes (Video mode, RGB mode and TV mode). Volume button Adjusts the sound volume. Wide screen selection button Switches the screen over to a desired wide screen. Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by state Lit (green): Power ON state Flashing (red or green): Malfunction (Flashes differently depending o
Resumen del contenido incluido en la página 7
01_E_7473.book 7 ページ ２００６年９月６日 水曜日 午後２時３６分 DISPLAY SECTION – BOTTOM /I power switch If this button is pressed when the power indicator lamp is off, the indicator lamp will light. The power can be turned on and the standby mode selected by using the remote control or the control panel of the display. If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out. *Power is still supplied to parts of the display even if the indicator lamp is off. RGB1 input te
Resumen del contenido incluido en la página 8
01_E_7473.book 8 ページ ２００６年９月６日 水曜日 午後２時３６分 PART NAMES AND FUNCTIONS (Continued) REMOTE CONTROL For details, see page . (POWER button) E-12 Switches between Power On and Standby. (WIDE button) E-16 Press to switch the screen size. (TV input mode selector button) E-13 Press to watch terrestrial broadcastings. (Video input mode selector button) E-14 Press to switch through VIDEO1 to VIDEO5. (RGB input mode selector button) E-15 Press to switch through RGB1. (TELETEXT input mode
Resumen del contenido incluido en la página 9
01_E_7473.book 9 ページ ２００６年９月６日 水曜日 午後２時３６分 (ENTER button) E-18–E-29 Press to fix the entry in the ADJUSTMENT MENU. (DUAL/STEREO button) E-15 Press to select the audio mode for stereo/dual-channel audio broadcasting. (COLOR button) E-14 In the teletext broadcasting, press these buttons to switch through the pages stored to each of the four colors in the LIST mode. Other than the LIST mode, these buttons can also be used for the colored option selected from the four teletext new optio
Resumen del contenido incluido en la página 10
01_E_7473.book 10 ページ ２００６年９月６日 水曜日 午後２時３６分 USING THE REMOTE CONTROL PUTTING BATTERIES IN THE REMOTE CONTROL (1) To remove the cover, slide it outwards (2) Place two AA batteries in the remote (3) Close the cover until it snaps into place. while pressing it down. control. Make sure that the batteries are properly oriented. PRECAUTIONS To prevent malfunction, do not apply any form of severe shock to the remote control. To prevent malfunction or deformation, do not allow the remote control to
Resumen del contenido incluido en la página 11
01_E_7473.book 11 ページ ２００６年９月６日 水曜日 午後２時３６分 CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT DVD RECORDER/PLAYER, SATELLITE TUNER • Connects to the antenna input terminal on the display bottom. • Connect the video signal cable to the component video input terminal, HDMI input terminal, S-video input terminal, or the video input terminal. • If the component to be connected is equipped with HDMI output terminal or the component video output terminal, connection to either of these terminals is recom
Resumen del contenido incluido en la página 12
01_E_7473.book 12 ページ ２００６年９月６日 水曜日 午後２時３６分 BASIC OPERATIONS TURNING THE POWER ON AND STAND-BY Press OFF/ON to the left at the bottom of the display to the STD- BY state. 1 The power lamp lights up. Press on the remote control. 2 The color of the power lamp changes from “Red” to “Green”. Press , the button of the channel you want to watch, and then 3 press or . Select TV or the picture mode to input. Press when the power is ON. 4 The color of the power lamp changes from “Green” to “Red”
Resumen del contenido incluido en la página 13
01_E_7473.book 13 ページ ２００６年９月６日 水曜日 午後２時３６分 WATCHING A TV BROADCASTING Select the country. 1 Select the country using the Auto Store function in the CHANNEL SETTING menu (see page E-26). This enable the terrestrial broadcastings to be watched for selected country. Press . 2 Available to watch the terrestrial broadcastings. The last Program No. that you watched is received. Select the Program No. 3 Press – . The program changes to the selected Program No. Select your desired Program No. (0
Resumen del contenido incluido en la página 14
01_E_7473.book 14 ページ ２００６年９月６日 水曜日 午後２時３６分 BASIC OPERATIONS (Continued) WATCHING A TELETEXT BROADCASTINGS Display the TV program. 1 Press to set to TV mode. Press . 2 This enables teletext broadcasts to be viewed. (superimposed over the TV program) The teletext broadcasting INDEX screen is received. * Whenever is pressed, the screen switches between teletext screen superimposed over the TV program and teletext-only screen. • Displays the teletext page program. The teletext page program i
Resumen del contenido incluido en la página 15
01_E_7473.book 15 ページ ２００６年９月６日 水曜日 午後２時３６分 RGB INPUT MODE Press to select the input mode. 1 The input terminal of RGB mode is as follows. • RGB1: mD-sub * For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on RGB1 mode P. E-25. CONVENIENT FUNCTIONS DISPLAY Displaying on-screen information. Press . The channel or mode is indicated on the screen for 5 seconds. PICTURE MODE Press . This button can be used to switch the picture mode. In the picture mode, you can switch b
Resumen del contenido incluido en la página 16
01_E_7473.book 16 ページ ２００６年９月６日 水曜日 午後２時３６分 WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES Press . 1 The currently selected mode will appear. Press to select a desired Screen Size. 2 Normal mode Each time you press , a different Screen Size appears. The sequences used are as follows: When you are in a Video input mode When you are in an RGB input mode * Depending on the type of signal, some aspects Wide1 mode may no
Resumen del contenido incluido en la página 17
01_E_7473.book 17 ページ ２００６年９月６日 水曜日 午後２時３６分 SCREEN SIZE Normal (Video/RGB) Displays pictures of normal size (i.e., a 4:3 aspect ratio). Wide1 (Video) Displays natural-looking pictures of standard size on the wide screen. Picture of Wide1 standard size Wide2 (Video)/Wide (RGB) Ideal for displaying vertically extended pictures such as squeezed pictures. Vertically Wide2 extended picture Zoom1 (Video)/Zoom (RGB) Enlarges horizontally extended pictures equally in all directions to maintain the asp
Resumen del contenido incluido en la página 18
01_E_7473.book 18 ページ ２００６年９月６日 水曜日 午後２時３６分 ADJUSTMENT MENU The numbers in parentheses ( ) indicate the reference page numbers. PICTURE (E-19) Signal Contrast (E-20) MENU Drive Contrast (E-20) Brightness (E-20) Color (E-20) Tint (E-20) Sharpness (E-20) Ambient Sensor (E-20) Picture Mode (E-20) Color Temp. (E-21) Picture Memory (E-21) Default POSITION/SIZE (E-22) Position (E-22) Size (E-22) Default AUDIO (E-23) Treble (E-23) Bass (E-23) Balance (E-23) Loudness (E-23) FEATURES (E-24)) Adjustme
Resumen del contenido incluido en la página 19
01_E_7473.book 19 ページ ２００６年９月６日 水曜日 午後２時３６分 BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS • Below is shown the basic procedure to make changes to the options in the ADJUSTMENT MENU. (Ex.: adjusting tint setting (Tint)) Press . 1 The main menu screen will appear. Press or to select “PICTURE”. 2 Each time you press or , one of the available menus appears in the following sequence: PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT “PICTURE” selected in the main menu screen The PICT
Resumen del contenido incluido en la página 20
01_E_7473.book 20 ページ ２００６年９月６日 水曜日 午後２時３６分 ADJUSTING THE PICTURE • Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-19 for the basic operation procedures. Signal Contrast Press to increase the input signal contrast. Press to reduce the input signal contrast. Press to store. Drive Contrast Press to raise the display’s luminance level, and increase the contrast. Press to lower the display’s luminanc
