Resumen del contenido incluido en la página 1
LCD TV
OWNER`S MANUAL
MODEL: L26A9
L32A9
Please READ this manual carefully before
operating your TV, and retain it for future
reference
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Know these safety symbols This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and object
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 16. Tilt/Stability - All televisions must comply with 2. Keep these instructions. recommended international global safety standards for 3. Heed all warnings. tilt and stability properties of its cabinet design. Follow all instructions. 4. Do not use this apparatus near water. applying excessive pull force to the front, or top, of 5. Clean only with a dry cloth. the cabine
Resumen del contenido incluido en la página 5
Pr ecaution ADDITIONAL SAFETY PRECAUTIONS • Ensure that LCD TV stand is tightened properly to the set on the right way of tightening of the screw of the stand to the set. Improper tightening of screw may render the set unsafe. • If LCD TV is Installed on the wall, Installation should be carried out by qualified servicemen. Improper or incorrect Installation may render the set unsafe. • Disconnect main plug when : — cleaning the TV screen, never use abrasive cleaning agents.
Resumen del contenido incluido en la página 6
Contents Guide for Preparatory Work IMPORTANT SAFETY INSTRUCTIONS .................................................. 2 Read before operating equipment ............................................................ 2 Precaution ................................................................................................. 3 Panel control and rear terminal control ..................................................... 5 Preparation of remote control .................................................
Resumen del contenido incluido en la página 7
Panel control and rear terminal control Explanations: The following illustration is for your convenience to recognize where all terminals are located and to connect peripheral equipment; due to the product improvement, the indications may be different from the actual one. The actual indications shall prevail. Side control panel Side control panel 3 4 2 1 INPUT 5 Explanations on the keys on the side of the TV set and their functions 1 INPUT: Recall / Close the signal source menu. 2
Resumen del contenido incluido en la página 8
Panel control and rear terminal control Side CVBS and rear terminals 26” 3 2 PC IN AUDIO TV ANTENNA HDMI 1 CVBS OUT VIDEO L R Y Pb Pr L R COMPONENT HDMI 2 32” VIDEO L R CVBS 1 IN 9 1 4 6 7 S-VIDEO VIDEO L R CVBS 2/ S-VIDEO IN 5 10 8 Explanations on the rear terminals and their functions: 1 COMPONENT: Color aberration component (YCbCr, YPbPr) Video/ Audio Input Terminal 2 AUDIO: VGA audio input terminal 3 PC IN: VGA video input terminal 4 CVBS 1 IN: CVBS-1 audio/vid
Resumen del contenido incluido en la página 9
Preparation of remote control Installation of remote control batteries •• As shown in the following diagram, put the remote control upside down and push open the battery chamber. •• Insert 2 AAA batteries as shown in the following diagram.(The positive and negative poles must correspond to the indication). •• Put back the battery chamber cover in place. 1 2 3 Never use rechargeable batteries, such as nickel-cadmium batteries.Such batteries are different in shape and performance, proper ope
Resumen del contenido incluido en la página 10
Descriptions of remote control function Using remote control Note:Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it. When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after three seconds or press OK to remove immediately. POWER WIDE BUTTON Press to turn the LCD TV On or off Press this button to display a list of available displa
Resumen del contenido incluido en la página 11
TELETEXT TELETEXT The key does not work. MIX The key does not work. SIZE The key does not work. SUBPAGE The key does not work. INDEX The key does not work. SUBTITLE The key does not work. HOLD The key does not work. REVEAL The key does not work. R/G/Y/B(Colour button) The key does not work. 9
Resumen del contenido incluido en la página 12
Connection and preparation of the TV set Mounting the seat Take the TV set and its seat out of the carton, and assemble them with the screws in the accessory box as shown in the following diagram: 1. Put the TV set on the soft cloth or cushion on the desktop with the face downwards.Place the seat on a secure plane surface. 2. Insert the seat into the clipgroove on the bottom of the TV set. 3. Attach the screws into the seat and screw them down. 26” 32” 10
Resumen del contenido incluido en la página 13
Backboard singal source interfaces There are a lot of signal sources that can be connected to your TV set. The following diagram shows how to connect them. Friendly tips: If you want to hang the TV set on a wall, all connecting lines must be inserted into the ports of the TV set in advance. Whenever a peripheral equipment is connected to the TV set, be sure the TV set is powered off. While connecting peripheral equipment, connect the cable to the terminal with the same color as its own. PC
Resumen del contenido incluido en la página 14
Side signal source interfaces S-VIDEO VIDEO L R CVBS 2/ S-VIDEO IN Earphone socket: The user may use the earphone via the earphone socket. CVBS-2 /S-VIDEO input: Connect the VIDEO outputs or S-VIDEO outputs of DVD player, LCD player, video recorder or video camera, etc. to the VIDEO input or S-VIDEO input of the TV set. (S-VIDEO is shared with the CVBS audio) Audio input: Connect the audio signal source (PC, DVD player, LCD player, video recorder or video camera, etc.) to the audio inp
Resumen del contenido incluido en la página 15
Preset and watch TV The following is how to use the On/Off key ( ) on the TV remote control to turn on/ off the TV set. (Press the key Channel +/- in standby mode may power on the unit, its the same for the side panel and the remote control. Power On/Off 1. While switching on the AC power supply, the red indicator lamp stands for standby mode, while the blue indicator lamp stands for power on. 2. If the TV set is in standby mode, press the On/Off key on the remote control to power on. 3. Pres
Resumen del contenido incluido en la página 16
Menu operation 1. Pressing the menu button may display or exit the main menu. 2. In the main menu, you may use the / key to select the functional options to be adjusted by moving up or down, press the > to enter the sub-menu adjustment, and press the menu key to exit the main menu. /> 3. In the sub-menu, you may use the < key to make adjustment, use the / key to select the previous/next option, and press the menu key to go back to the previous level. Signal source menu Press "SOURCE" bu
Resumen del contenido incluido en la página 17
Menu operation I. Image setting 1. Video preset: Provide five image setting modes including Personal, Standard, Vivid, Movie, enco. You can adjust the "Contrast, Brightness, Color and Sharpness" to your taste only in the Personal mode. 2. Contrast: Make the dark color in the black portion of the image enricher and make the white color brighter. 3. Brightness: Adjust the brightness of the image background; it is often used together with the Contrast, adjustable from 0 to 100. 4. Color:
Resumen del contenido incluido en la página 18
Menu operation II. Sound setting 1. Audio preset: Three output sound modes can be set, i.e. Personal, Music and speech. In the speech and Music modes, it is impossible to adjust Bass and Treble, while in the Personal mode, you may set the audio output effect by adjusting the Bass and Treble to your taste. 2. Bass: Adjustable from －10 to ＋10, used to adjust the volume of the low frequency sound. 3. Treble: Adjustable from －10 to ＋10, used to adjust the volume of the high frequency sound.
Resumen del contenido incluido en la página 19
Menu operation III. Function setting 1. Menu language: Set the menu language. Defaulted as English. 2. Menu timeout: Options including 10, 20, 30, 40, 50 and 60 seconds are available for you to set the menu timeout. 3. Sleep timer: Set the time interval for the TV set to enter standby mode automatically. (Not available in PC mode) Timing starts immediately after the sleep timer is set. Available options of sleep timer include 15, 30, 45, 60, 90 and 120 minutes; select "Off" to cancel th
Resumen del contenido incluido en la página 20
Menu operation IV. Channel setting (the following menus only appear in the TV mode) 1. Auto search: Search and store program automatically; press the "Menu" key to exit the Auto search mode. 2. Update search: Save the stored program and start a new search; Press the "Menu" key to exit the Update search mode. 3. Manual search: Press > to enter the sub-menu as shown in the following diagram (1) Program NO.: display the number of the current channel. (2) Program name: allows you to edit the n
