Resumen del contenido incluido en la página 1
52
OPERATION GUIDE
Resumen del contenido incluido en la página 2
Contents Basic Operation ...............................................................3 Menu Items .......................................................................5 Displaying the menu screen .........................................5 Menu item details .........................................................6 Adjustments for PC screen display ............................10 Initialization (Reset)/Functional Restriction Setting ...11 Controlling the Monitor with a PC (RS-232C) ..........
Resumen del contenido incluido en la página 3
Basic Operation 5. BRIGHT +/- (Backlight adjustment) Pressing or displays the BRIGHT menu when the 1 menu screen is not displayed. BRIGHT 15 2 3 4 Press or to adjust the brightness. * If you do not press any buttons for about 4 seconds, the 5 BRIGHT menu automatically disappears. 6. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 4.) 6 7 7. DISPLAY Displays monitor information. Every time you press this button, the display changes
Resumen del contenido incluido en la página 4
Basic Operation Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fi lls the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fi ll the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fi ll the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 c
Resumen del contenido incluido en la página 5
Menu Items Menu screen display Displaying the menu screen 1 3 2 4 Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu SCREEN PICTURE 1/2 PC3 D-SUB items. See pages 6 to 8 for details of each menu items. PICTURE AUTO AUDIO CONTRAST 30 Example of operation SETUP BLACK LEVEL 96 (Adjusting CONTRAST in the PICTURE menu) OPTION TINT 30 MENU 1. Press to display the menu screen. ENLARGE COLORS 30 PIP/PbyP SHARPNESS 12 SCREEN
Resumen del contenido incluido en la página 6
Menu Items SHARPNESS Menu item details Adjusts the sharpness of the image. The menu will differ depending on the input mode. ADVANCED (AV input) You can adjust more specifi cally. (See page 10.) SCREEN COLOR MODE AUTO (PC3/PC4) Changes the color mode on the screen. The color mode on The CLOCK, PHASE, H-POS, and V-POS are automatically the screen can also be changed using a remote control unit. adjusted. (See page 3.) Pressing performs adjustment. * sRGB is PC input only. See page 3 for deta
Resumen del contenido incluido en la página 7
Menu Items SCREEN MOTION ID No. SET Residual images are reduced by moving the screen. Assigns ID numbers to monitors connected in a daisy chain (see page 13), using RS-232 cables. PATTERN 1 .... The whole screen moves vertically and The numbers 1 to 255 are available for ID numbers. horizontally. If “0” is set, the system regards this as the state where no ID PATTERN 2 .... A black screen spreads from the bottom of number is set. the screen and then shrinks to the bottom of the screen. If t
Resumen del contenido incluido en la página 8
Menu Items COLOR SYSTEM (AV4/AV5) TIPS Select the color system of the AV equipment which is • When WHITE BALANCE is set to THRU, BLACK LEVEL, connected to AV4 and AV5 input terminal. (AUTO / PAL / CONTRAST, TINT, COLORS and GAMMA cannot be set. PAL-60 / SECAM / NTSC3.58 / NTSC4.43) • If COLOR MODE is set to sRGB or VIVID, the following When AUTO is selected, the color system is automatically items cannot be set. set according to the input signal. WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COP
Resumen del contenido incluido en la página 9
ENLARGE V ENLARGE V Menu Items Enlarge TIPS • You can align several monitors and integrate them into a • AV input signals cannot be used for the Enlarge function. single large screen to display. • To connect 6 or more monitors using PC1 signals, a splitter • Up to fi ve monitors can be aligned in both the horizontal for the video signal (commercially available) is required. and vertical directions. • When connected in PC2/PC3/PC4, a splitter for the video • Each monitor displays enlarged vie
Resumen del contenido incluido en la página 10
Menu Items (5) INPUT Adjustments for PC screen display Specifi es the input mode at power-on. When not specifying, Automatic adjustment the screen at the previous power-off appears. Input modes displayed on “PC1/AV1” depend on DVI When you use the PC3 input terminal or PC4 input terminals SELECT settings. to display a PC screen for the fi rst time, or when you change Input modes displayed on “PC2/AV2” depend on HDMI the setting of the PC, use the automatic screen adjustment. SELECT settings.
Resumen del contenido incluido en la página 11
Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and TEMPERATURE ALERT restrict operations. Selects the notifi cation method for an abnormal temperature. SIZE 1. After pressing for about 5 seconds, press , OFF .............. Do not notify about an abnormal , , and in that order. temperature. OSD & LED .. When an abnormal temperature is FUNCTION 1/1 detected, the power LED fl ashes in red ALL RESET and green alternately an
Resumen del contenido incluido en la página 12
Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM Communication conditions port) on the PC. You can also connect multiple monitors via a daisy chain by Set the RS-232C communication settings on the PC to match using a PC. By assigning ID numbers to each monitor (see the monitor’s communication settings as follows: page 13), you can make input mode selection/adjustment or Baud rate 9600 bps Stop bit 1 bit can check the status of a specifi c mo
Resumen del contenido incluido en la página 13
Controlling the Monitor with a PC (RS-232C) Response code format Communication interval When a command has been executed correctly • After OK or ERR is returned, you must send the following commands. O K Return code To set a timeout for the command response, specify 10 (0DH, 0AH) seconds or longer. A response is returned after a command is executed. • Provide an interval of 100 ms or more between the command response and the transmission of the next * If an ID number has been assigned co
Resumen del contenido incluido en la página 14
Controlling the Monitor with a PC (RS-232C) IDLK ........The parameter of this command sets the ID Commands for ID control number of the monitor. The monitor is subject to all The command examples shown on this page assume the subsequent commands. following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 Example: Following commands are for the monitor IDLK0002 ← with ID number: 2. Searching for monitor with ID number: WAIT ← 2 IDST ......... A monitor
Resumen del contenido incluido en la página 15
Controlling the Monitor with a PC (RS-232C) Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 * If monitors are connected as shown above, you can execute a command like “Set all monitors’ input settings to PC1 DVI-D”. Repeater control command Repeater control is
Resumen del contenido incluido en la página 16
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command fi eld (See page 12.) Direction: W When the “Parameter” is set in the parameter fi eld (see page 12), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” or “???+” (repeater control) in the parameter fi eld (see page 12). Parameter: Parameter fi eld (See page 12.) Reply: Response (Ret
Resumen del contenido incluido en la página 17
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Command Direction Parameter Reply Control/Response contents * AUTO AGIN W 1 When the input mode is PC3, PC4. - CONTRAST CONT WR 0-60 0-60 0-127 on PC3/PC4. BLACK LEVEL BLVL WR 0-60 0-60 0-127 on PC3/PC4. TINT TINT WR 0-60 0-60 B COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADVANCED FLESH TONE FLES WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH (When the input 3D-NR TDNR WR 0-2 0-2 0: OFF, 1: LOW, 2: HIGH B mode is AV.) MPEG-NR MPNR W
Resumen del contenido incluido en la página 18
Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command Direction Parameter Reply Control/Response contents * OSD H-POSITION OSDH WR 0-100 0-100 B OSD V-POSITION OSDV WR 0-100 0-100 SCREEN MOTION SCSV WR 0-4 0-4 0: OFF, 1-4: PATTERN1-4 B MOTION TIME 1 MTIM WR 0-20 0-20 B MOTION TIME 2 PATTERN1 MINT WR 10-990 10-990 Per 10 seconds B PATTERN2-4 MINT WR 5-20 5-20 Per second MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT B LANGUAGE LANG WR 14 14 ENGLISH 1 1 DEUTSCH 2 2 FRANÇAIS 3
Resumen del contenido incluido en la página 19
Controlling the Monitor with a PC (RS-232C) ENLARGE menu (When the input mode is PC) Function Command Direction Parameter Reply Control/Response contents * ENLARGE MODE EMAG WR 0-4 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are the numbers of monitors specifi ed for the longest direction and the shortest direction respectively.) BEZEL WIDTH WIDTH OF THE BEZH WR 0-100 0-100 SHORTER SIDE WIDTH OF THE BEZ
Resumen del contenido incluido en la página 20
Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents * PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 B PIP SIZE MPSZ WR 1-12 1-12 B PIP POS THE LONGEST MHPS W 0-100 B DIRECTION R 0-100 B THE SHORTEST MVPS W 0-100 B DIRECTION R 0-100 B PIP POS LD+SD BATCH MPOS W 0-100,0-100 Specify the position in MPOSxxxyyy format. B (xxx: Longer side, yyy: Shorter side position) R 0-100,0-100 Returns a response in (xxx,yyy)
