Resumen del contenido incluido en la página 1
Warnings
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING :
To reduce the risk of electric shock do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamatio
Resumen del contenido incluido en la página 2
Warnings Contents Before operating the set, please read this manual carefully. Warnings 3~4 Service Contents 5 Never remove the back cover of the TV, this can expose you to high voltage and Supplied Accessories 6 other hazards. If the TV does not operate properly, unplug it and call your nearest Controls 7~9 NEC Service Centre. Connect the antenna cable to the connection marked Ant. (on the rear). For best Controller of panel 7 reception, use an outdoor antenna. Remote controller 8~9 Basic Opera
Resumen del contenido incluido en la página 3
Supplied Accessories Controls L Make Sure the following accessories are provided with Product. 1. ON/OFF Switches TV set on or off. 2. MENU 1. AC/DC adaptor 2. AC Cord Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, COMPONENT, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.) or PC mode. / Clears the menu from the screen. 6. Power Indicator 4. Batteries (type AAA)
Resumen del contenido incluido en la página 4
Controls Controls All the functions can be controlled with the remote controller. Some functions can 12. VOLÏq (Volume Up/Down) also be adjusted with the buttons on the side panel of the set. Adjusts the sound level. Adjusts menu settings. 13. PC/ Remote controller * Selects the PC mode. Before you use the remote controller, please install the batteries. 14. PSM (Picture Status Memory) Recalls your preferred picture setting 1. POWER Turns the TV on from standby or off to standby mode. 15. SSM (S
Resumen del contenido incluido en la página 5
Basic Operation On Screen Menus and Displays Equalizer 1. Press the MENU button to display main menu. Turning the TV On and Off Flat 2. Press the PRxy button to select menus-Picture, Standby Setup: The AC-DC adapter and the AC power cord Music Sound, Special, Setup. Movie must be set up and connected to have the TV in standby mode Speech 3. Adjust each menu with the VOLÏq button. ready to be turned on. Press the ON/OFF button on the side User 0.1 0.5 1.5 5.0 10KHz 4. Press the MENU button to
Resumen del contenido incluido en la página 6
Setting up TV Programme Setting up TV Programme Once you have preset the programmes, you will be able to Manual Programme Manual Programme Auto Programme use the PRxy or NUMBER buttons to scan the Manual Programme lets you manually tune and arrange Programme 1 programmes you programmed. the programmes in whatever order you desire. Also you Channel 69 Programmes can be tuned using automatic or manual can assign a programme name with 5 characters to each Table V/UHF System BG modes. System BG prog
Resumen del contenido incluido en la página 7
Setting up TV Programme Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in Programme Edit Programme Edit NTSC mode) to the levels you prefer. This function enables you to delete or skip the stored P00 ----- P05 ----- programmes. P01 ----- P06 ----- Picture P02 ----- P07 ----- Manual Picture Control Also you can move some programmes to other Contrast 90 P03 ----- P08 ----- 1. Press the MENU button. programme numbers or insert a blank programme data i
Resumen del contenido incluido en la página 8
Sound Control Sound Control You can select your preferred sound setting; Flat, Music, Auto Sound Control Sound Movie or Speech. You can also adjust the sound * The sound Flat, Music, Movie and Speech are frequency of equalizer, balance. If you switch AVL to on, Equalizer programmed for good sound reproduction at the factory Balance 0 the set automatically keeps on an equal volume level even and cannot be changed. AVL Off if you change programmes. Surround Off 1. Press the MENU button. SSM (Soun
Resumen del contenido incluido en la página 9
Other functions Other functions You can control other functions; Clock, Blue Back, Auto Auto Sleep Special Sleep, Childlock, Radio, ARC and SLEEP TIMER menu. If you select Auto Sleep On the set will automatically switch Clock itself to standby mode approximately ten minutes after a TV Blue Back Off Channel stops broadcasting. Clock Auto Sleep Off 1. Press the MENU button. Setting the clock is necessary in order to use the various Childlock Off 2. Select the Special menu, then press VOLÏqbutton
Resumen del contenido incluido en la página 10
Radio Control TELETEXT This function is possible only when the set is in Radio mode.(Radio mode is displayed TEXT On/Off when the Setting for special menu is radio On.) 1. Press TEXT button once, displays the Teletext pages. Radio Setup If you press the TEXT button twice, the teletext pages Mode Auto 1. Use TV/AV button on remote controller to select Frequency 87.50 MHz and the TV picture are concurrently displayed on both Programme 1 Radio mode. sides of the screen. 2. Press the MENU button t
Resumen del contenido incluido en la página 11
TELETEXT External Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Special TELETEXT functions Examples are shown below When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. MENU Functions Antenna connection Changes Teletext mode TEXT 1. Connect RF out on the VCR to the Antenna input on the rear of the TV. Selects double height text. 2. Connect the antenna cable to the antenna
Resumen del contenido incluido en la página 12
External Equipment Connection Connecting PC as monitor When connecting to other equipment, please ensure you turn the main switch OFF to PC/DTV INPUT prevent any damage to the equipment. 1. Connect the PC IN cable D-sub jack from the monitor output socket of the PC to the PC/DTV input socket of the set. A/V INPUT 2. Connect the PC Audio IN cable from the 1. Connect the A/V out jacks on a VCR to A/V-IN PC to the PC AUDIO IN of the set. AV-IN jacks on the TV. COMPONENT VIDEO L(MONO
Resumen del contenido incluido en la página 13
Connecting PC as monitor Connecting PC as monitor Sound adjustment Position Adjustment Sound H/V Position 1. Press the MENU button. This function is to adjust picture to left/right and up/down Equalizer 2. Select the Sound menu, then press VOLÏq. as you prefer. H-Position 0 Balance 0 V-Position 0 3. Press the PRxy button to select the desired AVL Off sound item; Equalizer, Balance, AVL, Surround or Surround Off 1. Press the MENU button. Sound Mode L+R Sound Mode. 2. Select the H/V Position menu
Resumen del contenido incluido en la página 14
Connecting PC as monitor Product Specifications This function is possible only when the set is in PC mode. MENU Use the TV/AV button on remote controller. Model NLT-17WF Picture Sound Picture adjustment Horizontal size 520(520) mm Thickness 60(180) mm H/V Position You can adjust picture Contrast, Brightness, Main body Auto Temperature, Clock, Phase and ARC as you prefer. Reset (With stand) Height 320(365) mm Weight 4.85(6.2) kg 1. Press the TV/AV button to select the PC mode. 2. Pr
Resumen del contenido incluido en la página 15
Troubleshooting NEC Australia Pty. Ltd. ABN 86 001 217 527 Problem Check item Home Electronics Group • Insert the AC power cord plug securely in AC power No picture on screen and no sound outlet. from speakers • Make sure the remote control is not in the standby NEC Service Centres mode (The POWER/Standby indicator is red.) No picture/No picture from AV • Check the brightness setting of the display. New South Wales terminal • Lamp may have malfunction. Sydney 184 Milperra Rd, Revesby 2212 131-6
Resumen del contenido incluido en la página 16
500-028Z041028
