Manual de instrucciones de BLACKHAWK! BH6011

Resumen del contenido incluido en la página 1

Long Chassis
Hydraulic Service Jacks
Operating Instructions & Parts Manual
Model Number Capacity
BH6010 10 Ton
BH6011 (Air/Lever Actuated Model)
10 Ton
SFA Companies ©2004
10939 N. Pomona Ave. Kansas City, MO 64153
816-891-6390
sales@blackhawk-automotive.com
-Before using this product, read this manual and follow all its Safety Rules and Operating Instructions
Made in Taiwan

Resumen del contenido incluido en la página 2

TABLE OF CONTENTS Warranty P2 Save These Instructions P3 Product Description P3 Specifications & Safety Instructions P3 Assembly P4 Operation P5 Maintenance P5 Troubleshooting P6 Replacement Parts P6 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby. Perf

Resumen del contenido incluido en la página 3

SAVE THESE INSTRUCTIONS For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authorized. I

Resumen del contenido incluido en la página 4

! WARNING ! ADVERTENCIA • Leer, comprender, y seguir las instrucciónes antes • Study, understand, and follow all instructions de utilizar el aparato. provided with and on this device before operating • El manual de instrucciónes y la información de this device. seguridad deben estar comunicado en lengua del • Do not exceed rated capacity. operador antes del uso. • This is a lifting device only. • No seguir estas indicaciónes puede causar daños • After lifting, immediately transfer the load t

Resumen del contenido incluido en la página 5

OPERATION Lifting 1. Place vehicle in park, with emergency brake on and wheels securely chocked to prevent inadvertent vehicle move- ment. 2. Locate and close release valve by turning handle knob clockwise firmly. Center jack saddle under lift point. 3. Verify lift point, then use handle pump or foot pedal to contact lift point. To lift, pump handle or squeeze lift control valve until load reaches desired height. Note: Never use foot pedal to raise load. 4. Transfer the load immediately to appro

Resumen del contenido incluido en la página 6

TROUBLESHOOTING Symptom Possible Causes Corrective Action • Release valve not tightly closed • Ensure release valve tightly closed Jack will not lift load • Overload condition • Remedy overload condition • Air supply inadequate (Apply to • Ensure adequate air supply Model BH6011) • Release valve not tightly closed Jack will lift, but not maintain • Ensure release valve tightly closed • Overload condition pressure • Remedy overload condition • Hydraulic unit malfunction • Contact Blackhawk Tec

Resumen del contenido incluido en la página 7

Models BH 6010 and BH6011 Item # Part # Description Qty. 1 324-4-1900-208 Oil Filler Screw 1 2 G10-3-1309-106 Piston Link 1 3 G24-3-1700-100 Flex Joint Assembly 1 4* A2706-00 Air Motor Kit (includes item 5, 6, and 7) 1 5* A27-3-2000-104 Air Motor 1 6* 507-9-0064-013 Air Hose 1 7* A27-3-2050-109 Lift Control Valve 1 8 500-1-1500-309 Front Wheel 2 9 G10-6-4201-109 Saddle 1 10 521-2-0370-104 Return Spring 1 11 G10-1-2000-109 Power Unit (without Air Motor) 1 11A* G10-1-1000-104 Power Unit (with Air

Resumen del contenido incluido en la página 8

memo.