Manual de instrucciones de ATD Tools ATD-7304

Resumen del contenido incluido en la página 1

Owner's Manual
Trolley Jack
Model Capacity
ATD-7304
2 Ton
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

!
Obey all safety messages that follow this symbol to avoid possible injury or death.
! ADVERTENCIA ! WARNING
To avoid crushing and related injuries:
• Leer, comprender, y seguir las instrucciónes antes
de utilizar el aparato.
NEVER work on, under or around a
• El manual de instrucciónes y la información de
load supported only by a hyd

Resumen del contenido incluido en la página 2

SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack before using. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native

Resumen del contenido incluido en la página 3

OPERATION Saddle Lifting Oil Filler Plug (Remove cover Only attachments and/or adapters supplied Lifting Arm plate to access) ! Front by the manufacturer shall be used. Lift only Wheel on area of the vehicle as specified by the vehicle Handle manufacturer. Sleeve 1. Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the emergency brake and chock each unlifted wheel in both directions to Release Valve prevent inadvertent vehicle movement. 2. Close release

Resumen del contenido incluido en la página 4

MAInTenAnCe Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and neveR use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent. Adding oil 1. With saddle fully lowered set jack in its upright, level position. Remove oil filler plug. 2. *Proper oil level will vary from just covering the i

Resumen del contenido incluido en la página 5

REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, serial number and description below. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385. Tel:(636)327-9050 Fax:(636)327-9044 Model ATD-7304 Item Description Quantity 1 Front Wheel Assembly 2 2 Rear Caster Assembly 2 3 Saddle

Resumen del contenido incluido en la página 6

ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, Atd Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby. Performance of any obligation under this warranty may be obtained by contacting your point of sale and obtaining return or repair information from your supplier. Except where such limitations and exclu