Resumen del contenido incluido en la página 9
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box ANT IN 1. Plug the incoming cable into the ANT IN terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. ANT IN ANT OUT This terminal might be labeled "ANT OUT", "VHF OUT" or
Resumen del contenido incluido en la página 10
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable DVD Player or Cable Box/Satellite receiver between the HDMI IN/DVI IN (Set-Top Box) Rear Panel jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). HDMI Cable (Not supplied) What is HDMI? • HDMI(High-Definition Multimedia Interface), is an inter
Resumen del contenido incluido en la página 11
Connecting a DVD Player or Cable Box/Satellite receiver (Set-t op Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on DVD Player or Cable Box / the TV and the COMPONENT Satellite receiver (Set-t op Box) [Y, PB, PR] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audi
Resumen del contenido incluido en la página 12
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. ANt IN 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal
Resumen del contenido incluido en la página 13
Connecting a PC Using the D-Sub Cable Using the D-Sub Cable 1. Connect a D-Sub Cable between PC IN [PC] PC connector on the TV and the PC output connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your PC Audio Cable (Not supplied) computer. D-Sub Cable (Not supplied) Using the hDMI/DVI Cable Using the hDMI/DVI Cable 1. Connect a HDMI/DVI cable between the HDMI IN/DVI IN jack on the T
Resumen del contenido incluido en la página 14
Operation t urning the tV On and Off P Press the POWER button on the remote control. P You can also use the POWER button on the TV. Plug & Play feature Plug & Play When the TV is initially powered on, basic settings proceed automatically and subsequently : Start Plug & Play. 1. Press the POWER button on the remote control. OK The message "Start Plug & Play." is displayed with "OK" selected. Enter Plug & Play English 2. Press the ENtER button to enter the language. français Language Español
Resumen del contenido incluido en la página 15
If you want to reset this feature... 1. Press the MENU button to display the menu. tV Setup Plug & Play ► Press the ▲ or ▼ button to select "Setup", then press the ENtER button. Language : English ► t ime ► 2. Press the ENtER button again to select “Plug & Play”. Caption ► Melody : Off ► For further details on setting up options, refer to the pages 12. Entertainment : Off ► Energy Saving : Off ► AV Color System : Auto ► PIP ► The “Plug & Play” feature is only avai
Resumen del contenido incluido en la página 16
Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Air 1. Press the INfO button on the remote control. Mono The TV will display the channel, the type of sound, Picture : Standard and the status of certain picture and sound settings. Sound : Custom MtS : Stereo ➣ Press the INfO button once more or wait approximately 10 seconds and the SRS tS xt : Off display disappears automatically. 0 : pm Viewing the Menus tV P
Resumen del contenido incluido en la página 17
Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the Ch< or Ch> button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Manager). Selecting the Video Si
Resumen del contenido incluido en la página 18
t o Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ tV Input Source List : tV ► Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source Edit Name ► of your choice. 1. Press the MENU button to display the menu. Press the▲ or ▼ button to select “Input”, then press the ENtER button. 2. Press the ENtER button to select "Source List". Press the ▲ or ▼ button to select signal source, then press the ENt
Resumen del contenido incluido en la página 19
Picture Control Changing the Picture Standard You can activate either Dynamic, Standard, Movie by making a selection from the menu. tV Picture Mode : Standard ► 1. Press the MENU button to display the menu. Backlight Contrast Press the ENtER button, to select “Picture”. Brightness Sharpness 0 Color 0 t int G 0 R 0 2. Press the ENtER button to select "Mode". Detailed Settings ► Picture Options ► Press the ▲ or ▼ button t
Resumen del contenido incluido en la página 20
Adjusting the Detailed Settings Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1. Press the MENU button to display the menu. tV Picture Mode : Standard ► Press the ENtER button to select “Picture”. Backlight Contrast Brightness 2. Press the ENtER button to select “Mode” Sharpness 0 Color 0 Press the ▲ or ▼ button to select "Standard" o
Resumen del contenido incluido en la página 1
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos,
por favor contacte con nuestro Servicio de Atención al Cliente.
Country Web Site
Customer Care Center
ARGENTINE 0800-333-3733 www.samsung.com/ar
0800-124-421
BRAZIL www.samsung.com
4004-0000
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-80
Resumen del contenido incluido en la página 2
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. (See back cover for more informations.) Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the de
Resumen del contenido incluido en la página 3
English Contents GENERAL INfORMA tIO N ChANNEL CONtRO L ■ List of Features ............................................................................. 2 ■ Adding and Erasing Channels .................................................... 31 ■ Accessories .................................................................................. 2 ■ Activating the Child Lock ............................................................ 32 ■ Viewing the Control Panel ........................................
Resumen del contenido incluido en la página 4
General Information List of features Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. hDMI/DVI connection of your PC to this tV. Excellent Picture Quality - DNIe technology provides life-like clear images. SRS TruSurround XT - SRS TruSurround XT provides a virtual surround system. Accessories Please make sure the following items are included with your LCD TV. If any items are missing, contact your
Resumen del contenido incluido en la página 5
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Side Panel buttons 1 2 3 4 5 6 8 8 7 The product color and shape may vary depending on the model. 1 SOURCE 5 (POWER) Toggles between all the available input sources Press to turn the TV on and off. (TV, AV, S-Video, Component1, Component2, PC, HDM
Resumen del contenido incluido en la página 6
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~11. 1 2 3 4 [tV Rear Panel] 9 8 7 6 5 The product color and shape may vary depending on the model. 1 hDMI IN/DVI IN / DVI IN [R-AUDIO-L] 6 AV IN Connects to the HDMI jack of a device with an HDMI Video and audio inputs for external devices, such as a output. camcorder or VCR. - No s
Resumen del contenido incluido en la página 7
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1 POWER # SOURCE Turns the TV on and off. Press to display and select the available video sources. 2 tV Selects the TV mode directly. $ PRE-Ch Tunes to the previous channel. 3 NUMERIC BUtt ONS Press to change the channel. % Ch / Ch Press to change channels. 4 Use to select a channel over 100. ^ REtURN For example, for channel 122, Returns to the previous menu. press “ ”, then “2”, t
Resumen del contenido incluido en la página 8
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. If the remote control doesn’t work, check the following: 1. Is the TV power on? 2. Are
