Manual de instrucciones de Dodge S-2000

Resumen del contenido incluido en la página 1

INSTRUCTION MANUAL FOR
®
DODGE S-2000 SPHERICAL ROLLER BEARINGS

EXPANSION BEARING
GENERAL INFORMATION
Steps (1, 2, 3) Same as Non-Expansion Bearing.
DODGE S-2000 Spherical Roller Bearing mounted units incor-
porate a unique way of sealing the internal components of the
4. Position expansion bearing in the housing. For normal
bearing while still allowing a full + or - 1 degree of misalignment.
expansion conditions, the bearing insert should be posi-
The patented sealing system (Pat.

Resumen del contenido incluido en la página 2

OPERATING TEMPERATURE LUBRICATION INSTRUCTIONS Abnormal bearing temperatures may indicate insufficient lubrication. If the housing is too hot to touch for more than a OPERATION IN PRESENCE OF DUST, WATER few seconds, check the temperature by applying a thermom- OR CORROSION VAPORS eter at the top of the pillow block with the thermometer tip This bearing is factory lubricated with No. 2 consistency surrounded by putty. lithium complex base grease which is suitable for most Bec

Resumen del contenido incluido en la página 3

3

Resumen del contenido incluido en la página 4

COMPONENT PART NUMBERS (1 3/8" - 4 15/16") ITEM 1 1A 2 3 4 5 Shaft Size Bearing Insert Assembly Bearing Insert Assembly * Collar * Set Snap ** Grease Size (R) Seal (L) Seal Screw Ring Fitting 1 3/8 070000 070016 040050 400058 069276 405015 1 7/16 070001 070017 040050 400058 069276 405015 1 1/2 070002 070018 040050 400058 069276 405015 1 11/16 070003 070019 040051 400058 069277 405015 1 3/4 070004 070020 040051 400058 069277 405015