Resumen del contenido incluido en la página 1
PLASMA DISPLAY
Owner’s Manual
SRPD442
Before you can view a picture on the plasma display, you
must first connect the unit to an external video source. See
page 21 of the owner’s manual.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP
OR OPERATING AFTER READING OWNER’S MANUAL,
PLEASE CALL TOLL FREE
1-800-968-3429.
Resumen del contenido incluido en la página 2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DAN- GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK IS PRE- DO NOT OPEN SENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE SHOCK, DO NOT REMOVE COVER (OR BACK) NO ARE IMPORTANT OPERATING AND USER SERVICEABLE PARTS INSIDE. REFER SER- MAINTENANCE INSTRUCTIONS IN THE VICING TO QUALIFIED
Resumen del contenido incluido en la página 3
RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Resumen del contenido incluido en la página 4
IMPORTANT SAFETY INSTRUCTIONS Thank you for purchasing this plasma display. Please make sure to read this manual before using the plasma display, and pay particular attention to the Safety Instructions enclosed within. When you have finished reading this manual, store it in a safe place for easy access in the future. When moving the plasma display Regarding This Manual Due to the weight of this plasma display, two peo- • Product and company names appearing within ple should be used when moving i
Resumen del contenido incluido en la página 5
ONTENTS C IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 INSERTING THE REMOTE CONTROL BATTERIES . . . . . . . . . . . . . . . . . . . . . .7 REMOTE CONTROL RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 COMPONENT NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 MAIN U
Resumen del contenido incluido en la página 6
UPPLIED ACCESSORIES S This product comes with the following accessories: Please confirm that they are included. POWER VOL MUTE SCREEN MODE STILL INPUT SELECT DISPLAY MENU PREVIOUS SLEEP P Owner's Manual P Remote Control P AA batteries x 2 (0EMN02415) (NE801UD) P Power cable P Set Up Guide (1EMN20006) (WBC0202H0001) NOTE If any of these accessories are missing, please contact your dealer. 6
Resumen del contenido incluido en la página 7
NSERTING THE REMOTE CONTROL BATTERIES I 1 Remove the back cover of the remote control 3 Replace the back cover of the remote control. while pressing the tab on the back cover down with your finger. NOTE • Do not insert a mix of old and new batteries. 2 Insert two AA size batteries, making sure that • Do not insert a mix of different brands of batteries, the polarities of the batteries match the sym- or different types of batteries. • Always use new, fresh batteries as replacement. bols inside th
Resumen del contenido incluido en la página 8
OMPONENT NAMES C MAIN UNIT Figure 2 Figure 3 Front Rear STANDBY ON POWER VOLUME INPUT SELECT Input Terminals STANDBY ON POWER R AUDIO L VOLUME INPUT SELECT 8 VIDEO2 1 S-VIDEO2 2 3 Input Terminals Infrared Sensor AUDIO AC IN AUDIO OUT R L Y Cb Cr L AUDIO VIDEO1 S-VIDEO1 COMPONENT 1 R L 4 R COMPONENT 2 RL Y Pb Pr 5 6 7 8 9 1 POWER button: Turns the power ON or 8 AUDIO/VIDEO/S-VIDEO: Input terminals for STANDBY. an audio and video signal. You can select either VIDEO or S-VIDEO. 2 ON indicator: Ligh
Resumen del contenido incluido en la página 9
REMOTE CONTROL Figure 4 1 POWER VOL 2 MUTE SCREEN MODE 3 4 STILL 5 INPUT SELECT 6 DISPLAY 7 9 MENU PREVIOUS 10 11 SLEEP 8 1 POWER button: Turns the main power ON 9 MENU button: Accesses the setup menu, or STANDBY. allowing you to access various settings. K L 2 VOL (up) / (down) button: Increases or 10 PREVIOUS button: Moves up one level in decreases the volume. the setup menu. K L 3 MUTE button: Turns the audio off. 11 (up) / (down) button: Selects the various modes in the setup menu. 4 SCREEN M
Resumen del contenido incluido en la página 10
PERATING THE PLASMA DISPLAY O BASIC OPERATIONS 3 Adjust the volume and screen size according POWER VOL to your requirements. POWER K L Perform adjustments to the volume (VOL / MUTE SCREEN MODE button), screen aspect ratio (SCREEN MODE button), and picture settings (MENU button) STILL NOTE: K L • When you adjust the volume with the VOL / button, a message such as the following is dis- INPUT SELECT played on the screen. This message disappears INPUT SELECT DISPLAY approximately 4 seconds after p
Resumen del contenido incluido en la página 11
SELECTING THE INPUT SIGNAL Selecting the Input Signal POWER VOL 1 Press the INPUT SELECT button to select the MUTE input signal. SCREEN MODE Each time you switch the input signal, the STILL name of the selected input terminal is dis- played on the display for approximately 4 sec- onds. INPUT SELECT The INPUT SELECT button cycles through the INPUT SELECT DISPLAY input terminals in the following pattern: DISPLAY Video 1 Video 2 Component 1 (S-Video 1) (S-Video 2) The procedure for selecting the in
Resumen del contenido incluido en la página 12
OPERATING THE PLASMA DISPLAY CHANGING THE ASPECT RATIO (SCREEN MODE) Each time you change the screen mode, the POWER VOL name of the selected mode is displayed on the screen for approximately 4 seconds. MUTE The SCREEN MODE button switches between SCREEN MODE the screen modes in the following pattern. SCREEN MODE STILL Normal Full Wide Zoom INPUT SELECT DISPLAY NOTE: • When switching the input signal, the audio mute turns ON temporarily. • You can only select the "Normal" and "Zoom" By changing
Resumen del contenido incluido en la página 13
STILL SLEEP INPUT SELECT POWER VOL DISPLAY MUTE SCREEN MODE MENU PREVIOUS STILL SLEEP STILL SLEEP INPUT SELECT DISPLAY You can freeze the image displayed on the You can select the sleep timer. screen. 1 Press the SLEEP button. 1 Press the STILL button. The sleep timer is displayed on the screen. The still mode turns on, and the image dis- played on the screen is frozen. NOTE: • If the sleep timer is activated, the remaining time is displayed on the screen. NOTE: If not activated, “0 minutes” is
Resumen del contenido incluido en la página 14
OPERATING THE PLASMA DISPLAY NAVIGATING THE SET UP MENU In the setup menu, you can specify settings for picture adjustment, picture position, language, screen saver, and background. NOTE: If you do not press any buttons for approximately 20 seconds, the display automatically exits the menu mode. Layout of the Setup Menu The various functions in the setup menu are outlined below: MAIN MENU Picture select Picture mode News Manual Movie Sport Brightness Contrast Color Tint Sharpness Cool Color temp
Resumen del contenido incluido en la página 15
ENTERING THE MAIN MENU PICTURE SELECT INPUT SELECT INPUT SELECT DISPLAY DISPLAY K MENU PREVIOUS MENU PREVIOUS MENU MENU PREVIOUS B SLEEP SLEEP L 1 Press the MENU button. 1 Enter the main menu with the MENU button. “Picture select” is selected on the MAIN The display enters the main menu, and the MAIN MENU is displayed on the screen. MENU. 2 Press the B (ENTER) button. The PICTURE SELECT menu is displayed on the screen. NOTE: • If you press the PREVIOUS button or the MENU button on the MAIN MENU,
Resumen del contenido incluido en la página 16
OPERATING THE PLASMA DISPLAY INPUT SELECT Manually Adjusting the Picture Settings DISPLAY 1 Select "Picture mode" on the PICTURE K K L SELECT screen with the / buttons. MENU PREVIOUS MENU PREVIOUS 2 Select "Manual" with the { / B buttons. { B SLEEP The display enters the manual mode, and you can specify individual adjustments. L K L 3 Select the mode to adjust with the / but- tons. The modes rotate in the following order: "Picture mode" - "Brightness" - "Contrast" - .. Automatically Adjusting th
Resumen del contenido incluido en la página 17
Initializing the Adjustments WINDOW SETTING 1 Select "Reset" on the PICTURE SELECT K L DISPLAY screen with the / buttons. K 2 Press the B (ENTER) button. MENU PREVIOUS The settings you specified individually are ini- MENU tialized (return to their default factory settings) { B SLEEP NOTE: • The default factory settings are as follows: PICTURE MODE: MANUAL L BRIGHTNESS: 50/100 CONTRAST: 70/100 COLOR: 50/100 You can move the picture displayed on the screen TINT: 50/100 up, down, left or right. SHA
Resumen del contenido incluido en la página 18
OPERATING THE PLASMA DISPLAY SWITCHING THE DISPLAY LANGUAGE K L 4 Select the mode to adjust with the / but- ton. Select "H-Position" to move the picture hori- DISPLAY zontally (left or right), and select "V-Position" to move the screen vertically (up or down). K MENU PREVIOUS 5 Adjust with the { / B buttons. MENU PREVIOUS The { / B buttons are also used for moving { B SLEEP the picture vertically. 6 Press the PREVIOUS button to return to the L MAIN MENU. NOTE: • Pressing the MENU button cancels
Resumen del contenido incluido en la página 19
SETTING THE SCREEN SAVER AND THE BACKGROUND COLOR Setting the Screen Saver DISPLAY 1 Select "Screen saver" on the DETAIL screen K K L with the / buttons. MENU PREVIOUS MENU PREVIOUS 2 Select the mode with the { / B buttons. { B SLEEP NOTE: • There are 3 modes for the screen saver; "Off", L "Slow", and "Fast". "Slow" moves 1 pixel every 30 minutes, and "Fast" moves 1 pixel every 10 minutes. This prevents images burning into the screen. • When a 480i or 1080i input signal connected to You can spec
Resumen del contenido incluido en la página 20
XTERNAL INPUT TERMINALS E The following input terminals are available. In order to view television, it is necessary to connect a tuner device (example: cable box, satellite box, DTV, etc.) to the plasma display. R AUDIO L VIDEO2 S-VIDEO2 AV Input Terminals VIDEO 2 S-VIDEO 2 See page 21. AUDIO AUDIO OUT RL Y Cb Cr L AUDIO VIDEO1 S-VIDEO1 COMPONENT 1 R L R COMPONENT 2 RL Y Pb Pr Audio Output Terminals AV Input Terminals Component Input Terminals AUDIO OUT VIDEO 1 COMPONENT 1 S-VIDEO 1 COMPONENT 2
