Resumen del contenido incluido en la página 1
Installation and Operation Manual
VE-640
Low Profile Television
6.4” LCD Drop Down Under Counter TV / Video Monitor
CH
SEEK
TV CH 1
SET
TV FM/AM
VOL
FM/AM CH 2
CH 3
ON/OFF A/V TEL CH 1 CH 2
AM
CH 3
PM
AUDIOVOX
FEATURES
n Multi-Function Remote Control
n Built-In Telephone Mode
n Cable Ready 125 Channel Tuner
n Internal Stereo Speakers
n Under Cabinet Mounting
n A/V Input
-1-
Resumen del contenido incluido en la página 2
IMPORTANT SAFETY INFORMATION 1) Unplug the unit before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 2) Use only Audiovox approved accessories. 3) Do not install this video product where it is likely to be exposed to water. 4) Do not obstruct the slots and openings in the cabinet. They are provided for ventilation and are necessary to ensure reliable operation of the TV and to protect it from overheating. This TV should never be placed near or over a
Resumen del contenido incluido en la página 3
INCLUDED IN THIS KIT 1 VE-640 Television TOOLS REQUIRED 2 Remote Control Unit (PN 136C2037) Philips Head Screwdriver 3 AC Power Cord (PN 136B2038) Centerpunch 4 Mounting template 1/8” Drill Bit 5 Hardware Bag (PN 1501395) Electric Drill A 3/4” Mounting screws (4) Adhesive Tape B 1-1/4” Mounting screws (4) C 1-1/2” Mounting screws (4) D 3/4” Spacer (4) E 1/2” Spacer (4) F 1/4” Spacer (4) G Self Adhesive Wire mounting clip (1) (Not Shown) 6 AM Antenna 7 FM Dipole Antenna 3a 3 3a 1 1 2 TV PWR TEL T
Resumen del contenido incluido en la página 4
UNDER CABINET INSTALLATION Cabinet or Shelf 3/4” or less Spacers Spacers Bottom Edge Molding SIDE VIEW FRONT VIEW 1) Choose an appropriate mounting location underneath a cabinet or shelf. Close proximity to an electrical outlet and a TV antenna or cable connection will facilitate a neat, easy installation. Do not mount the VE-640 above a range or oven. Be sure that the location chosen will provide adequate access to the electrical connectors on the rear of the unit before continuing. 2) If th
Resumen del contenido incluido en la página 5
FRONT PANEL CONTROLS 14) CH3-BUTTON-Press this button to view 1) REMOTE INFRARED SENSOR-This sensor the third user programmed channel. receives infrared signals from the hand held 15) CH2-BUTTON-Press this button remote control unit. to view the second user programmed 2) TV INDICATOR-When illuminated, the VE640 channel. is in television mode. 16) CH1-BUTTON-Press this button to view 3) FM/AM INDICATOR-When illuminated, the the first user programmed channel. VE640 is set to receive AM or FM radio
Resumen del contenido incluido en la página 6
REAR PANEL CONNECTIONS AM-ANT. FM-ANT. TV-ANT. AUDIO-IN VIDEO-IN 5) VIDEO INPUT-Connect to the video output from 1) FM ANTENNA- Allows the VE-640 to be external A/V source. connected to an external antenna for the reception of FM broadcast signals. 6) TELEPHONE JACK-Connect to Telco jack for speakerphone. 2) 75 OHM ANTENNA CONNECTOR 7) AM ANTENNA-Allows the VE-640 to be connected Allows the VE-640 to be connected to an external antenna for the reception of AM to a 75 ohm external c
Resumen del contenido incluido en la página 7
REMOTE CONTROL FUNCTIONS 4 8 10 11 1 6 3 TV TEL TV/CA PWR NOTE: The remote 9 VOL MUTE control has a magnet ENT CH CH on the rear of the VOL 5 SEEK A/N A/V control for easy FM/AM 2 storage on a metal 1 2 3 7 surface. (Do not store CLR 4 5 6 on oven or range). 8 0 7 9 1. POWER ON/OFF (PWR) Press this button to turn the TV on. Press the button again to turn the TV off. 2. NUMERICAL BUTTONS (1- 9, 0) Use these buttons to make a direct channel selection. The channel number chosen will be di
Resumen del contenido incluido en la página 8
OPERATION TURNING THE VE-640 ON/OFF 1) Press the ON/OFF button to turn the unit on. 2) Press the ON/OFF button again to turn the unit off. CHANNEL TUNING SET UP In addition to normal broadcast reception of VHF and UHF channels, if you are a Cable TV subscriber, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to Broadcast TV it receives CH2-CH69. When set to one of the CATV modes (STD, HRC, or IRC) it receives CH1-CH125. NOTE: Mos
Resumen del contenido incluido en la página 9
OPERATION CONTINUED SETTING THE PRESETS (FOR AM AND FM RADIO OR TV MODES) 1) Tune to the desired channel. 2) Press the set button and the display flashes. 3) Select desired Preset (Channel 1, 2, or 3) and the LED adjacent to the preset will illuminate to confirm selection. TROUBLESHOOTING Problem Solution Poor Reception Verify Tuner setting matches Antenna / Cable broadcast system. Remote control will not function Verify that the sensor on the VE-640 is not obstructed. Verify that the infra
Resumen del contenido incluido en la página 10
TECHNICAL SPECIFICATIONS Illumination: CCFL Edge Lit Tube Backlighting Life Expectancy: 10,000 Hrs. Pixels: 224, 640 Resolution: 960 x 234 Power Supply: 120 VAC 60 Hz, 22 Watts Operating Temperature: 0° - 40° C Frequency Range: AM 520 kHz-1710 kHz FM 87.5 MHz-108 MHz Channels: (2- 69) VHF/UHF 125 CABLE TV TV System: NTSC Audio Output: 1.2 W/4 Ohms (2 Speakers) Body Size: 11-3/4”W x 11 “D x 2”H (Closed) 11-3/4”W x 11 “ D x 7-5/8”H (Open) Screen: TFT, Active Matrix LCD 6.4” Diagonally Measure
Resumen del contenido incluido en la página 11
90 DAY LIMITED WARRANTY Applies to Audiovox Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or repla
Resumen del contenido incluido en la página 12
128-6124 © Copyright 2001 Audiovox Corp. 150 Marcus Blvd. Hauppauge, NY 11788 -12-
