Manual de instrucciones de Harbor Freight Tools 66632

Resumen del contenido incluido en la página 1

digital photo sensor
tachometer
66632
set up and operating instructions
®
distributed exclusively by harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sa Ve this manual.
© ®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or fo

Resumen del contenido incluido en la página 2

speciFications set up Before first use, remove the clear protective Display LCD 5 Digits covering from face of Display. RPM Range 6 - 99999 RPM Battery installation Accuracy ± 0.05% plus 1 RPM (4) 1.5 VDC (AA) Batteries Power Source (not included) or AC adapter (not included) Operating 32° - 104° F, < 85% Humidity Environment unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools Figure 1 a

Resumen del contenido incluido en la página 3

adjust the distance between the Tachometer operation and the reflective tape. Photo Source 6. After the test button is released, the maxi- mum, minimum and last readings of the measurements are stored. Socket for Display AC Adapter Memory Button Test Button symbol ey k Low Battery Indicator: -Batteries are low and need replacing Maximum reading is displayed Figure 2 Minimum reading is displayed Photoelectricity mode symbol 1. Cut a 3/4” length of reflective tape (in- Revolutions per

Resumen del contenido incluido en la página 4

please read the FolloWing careFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLAC