Resumen del contenido incluido en la página 1
Operating Instructions
High Defi nition Plasma Display
Model No.
TH-103PF9UK
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
TQBC2122-1
Resumen del contenido incluido en la página 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
Resumen del contenido incluido en la página 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Resumen del contenido incluido en la página 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
Resumen del contenido incluido en la página 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Resumen del contenido incluido en la página 6
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal ................................................................. TY-ST103PF9 • Wall-hanging bracket (vertical) ............................... TY-WK103PV9 • BNC
Resumen del contenido incluido en la página 7
Safety Precautions / Maintenance WARNING Do not handle the power cord plug with wet hands. Setup • Doing so may cause electric shocks. Do not place the Plasma Display on sloped or unstable surfaces. Do not do anything that might damage the power cable. • The Plasma Display may fall off or tip over. When disconnecting the power cable, hold the plug, not the cable. Do not place any objects on top of the Plasma • Do not damage the cable, place heavy objects on top Display. of it, heat it, p
Resumen del contenido incluido en la página 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Fixing bands × 2 Instruction book Transmitter Remote Control EUR7636070R Transmitter (2 × AA Size) AC cord Allen wrench Eyebolt cap × 3 Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity ( + and -). + - + - “AA” size Helpful Hint: For frequent re
Resumen del contenido incluido en la página 9
Connections AUDIO OUT Terminals connection RL Speakers (Optional accessories) AUDIO OUT Stereophonic sound code audio equipment AC cord connection (see page 13) AC cord connection (see page 13) line-in – AC cord fi xing Unplug the AC cord Close Close Push until the hook clicks. 1 Plug the AC cord into Open Open the display unit. 2. Pull off. Plug the AC cord until Note: it clicks. Unplug the AC cord pressing 1. Keep the Make sure that the AC 2 Fix the AC cord with the two knobs. cord is
Resumen del contenido incluido en la página 10
Connections PC Input Terminals connection COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48
Resumen del contenido incluido en la página 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specifi cation, so that the P
Resumen del contenido incluido en la página 12
Connections DVI-D connection PC with DVI-D DVI-D video out video cable AUDIO (Within 5 m) DVI-D IN SLOT2 Mini-plug (M3) DVI-D Input Connector Pin No. Signal Name Pin No. Signal Name Pin Layouts 1 13 T.M.D.S. data 2- T.M.D.S. data 3+ 2 14 T.M.D.S. data 2+ +5 V DC 3 T.M.D.S. data 2/4 shielded 15 Ground 24 17 4 T.M.D.S. data 4- 16 Hot plug sense 5 T.M.D.S. data 4+ 17 T.M.D.S. data 0- 6 18 DDC clock T.M.D.S. data 0+ 16 9 7 19 DDC data T.M.D.S. data 0/5 shielded 20 8 T.M.D.S. data 5- 8 1 21
Resumen del contenido incluido en la página 13
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Right side surface Example: The screen below is displayed for a while after the Main Power Plasma Display is turned on. (setting condition is an On / Off Switch example.) Remote Control Power Indicator Senso
Resumen del contenido incluido en la página 14
Basic Controls Right side Enter / Aspect button surface (see page 16, 19) Volume Adjustment ENTER/ Volume Up “+” Down “–” When the menu screen is displayed: + / VOL “+” : press to move the cursor up - / “–” : press to move the cursor down MENU (see page 16) INPUT MENU Screen ON / OFF Remote control sensor Each time the MENU button is pressed, the menu Power Indicator screen will switch. (see page 16) The Power Indicator will light. Normal Viewing PICTURE SETUP • Power-OFF ...... Indicator n
Resumen del contenido incluido en la página 15
Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. POSITION buttons R button (see page 17) Press the R button to return to previous menu screen. Status button ACTION button Press to make Press the “Status” button to display the current system status. selections. 1 PC Input labe
Resumen del contenido incluido en la página 16
On-Screen Menu Displays The MENU button on the unit can also be To PICTURE adjust menu pressed. Press to select . 1 (see page 24) - / PICTURE 1/2 MENU Right side NORMALIZE NORMAL surface INPUT PICTURE MENU STANDARD PICTURE 25 BRIGHTNESS 0 Each time the MENU button is pressed, the [ from the unit ] COLOR 0 menu screen will switch. TINT 0 Right side surface SHARPNESS 5 Normal Viewing PICTURE SETUP ENTER/ 2 SOUND POS. /SIZE + / PICTURE 2/2 VOL 1 - / NORMAL COLOR TEMP COLOR MANAGEMENT OFF MENU A
Resumen del contenido incluido en la página 17
On-Screen Menu Displays Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. [ from the unit ] 2 Press to access - / each adjust MENU screen. Right side surface INPUT Press the R button to return to previous menu. Press to return to next menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB To SIGNAL screen for Digital (S VIDEO) (see page 37, 38) COMPONENT (see page 38) (see page 38, 39) (see pag
Resumen del contenido incluido en la página 18
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2 INPUT3 PC ENTER/ + / VOL Notes: - / • Selecting is also possible by pressing the INPUT button on the unit. MENU • Input terminal will not be selected if the terminal board is not installed into IN
Resumen del contenido incluido en la página 19
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: NORMAL ZOOM FULL [from the unit] Right side surface Panasonic AUTO JUST ENTER/ The aspect mode changes each time the ENTER button is pressed. + / VOL - / [During MULTI PIP Operations] NORMAL FULL • Picture and Picture, Picture in Picture : • Others : Aspect switching is not possible. Notes: • For PC
Resumen del contenido incluido en la página 20
Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select AUTO SETUP / H-POS / H-SIZE / V-POS / 2 V-SIZE / DOT CLOCK / CLOCK PHASE / 1:1 PIXEL MODE. Press to adjust POS. /SIZE. 3 During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal. POS. /SIZE NORMALIZE NORMAL AUTO SETUP 4 Press to exit from adjust mode. 0 H-POS H-SIZE 0 0 V-POS 0 V-SIZE Notes: 1:1 PIXEL MODE OFF • Adjustment details are memorized separately for different input signal formats (Adjustments for c
