Resumen del contenido incluido en la página 1
Owners Manua
\
BNDEX
Door Opener
39°535006
Page
Features of Your Opener ................ 2
Specifications ............................... 2
You'll Need Tools ............................ 2
Safety Rules .................................. 3
Carton Check List ............................ 4
Accessories .................................... 5
Identify Your Door Type .................. 5
Assembly ........................................... 6
CAUTION: READ INSTRUCTIONS AND RULES Installation ..........
Resumen del contenido incluido en la página 2
FEATURES OF YOUR OPENER 1o Opener Lights: Turn on and off automatically, 5_ Motor Power: 1/2 horsepower permanently lubri- with 4-1/2 minute illumination for your safety and cated motor with automatic reset convenience. Provide constant light when Work 6., Digital Radio Controls: 19,683 codes from which Light control button is pressed.. to choose Can be changed easily by the owner.. 2,. Safety System: Independent up and down force 7o Easy Limit Adjustment: Limits of door opening adjustment.. Doo
Resumen del contenido incluido en la página 3
THIS SAFETY ALERT SYMBOL MEANS CAUTION -- PERSONAL SAFETY OR PROPERTY DAMAGE IN- STRUCTION., READ THESE INSTRUCTIONS CAREFULLY, THIS GARAGE DOOR OPENER IS DESIGNED AND TESTED TO OFFER REASONABLY SAFE SERVICE PROVIDED IT IS INSTALLED AND OPERATED IN STRICT ACCORDANCE WITH THE FOLLOWING SAFETY INSTRUCTIONS., FAILURE TO COMPLY WITH THE FOLLOWING INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY OR PROPERTY DAMAGE,. KEEP GARAGE DOOR BALANCED.. STICKING DO NOT USE FORCE ADJUSTMENTS TO COM- OR BINDIN
Resumen del contenido incluido en la página 4
CARTON CHECK LIST SEARS has packaged your Garage Door Opener in two cartons THE RAtLASSEMBLY CARTON CONTAI NS: a three-piece rail, two hanging straps, straight door arm section* and rail assembly hardware,, THE OPENER CARTON CONTAINS: Header Bracket* Walt Control Opener Chassis 4-Strand BeFI Wire* Plastic Light Lenses (2) Sprocket Cover* Owners Manuar Cable Pully Bracket* Transmitter and Clip (1) Door Bracket & Plate* Chain & Cable (in dispenser carton)* Hardware Bag (includes Caution Label) 2-P
Resumen del contenido incluido en la página 5
Accessories Sears offers many useful accessories for you r garage door open er, They are illustrated below with Sears stock n u m- bers and descriptions. 53708 _ EXTRA TRANSMITTER: Includes visor clip,, 53716 _ TOUCH CODE LOCK: Enables homeowner to open the garage door opener from the outside by entering code on specially designed keypad, 53703 _// OUTDOOR KEY SWITCH: Opens the garage door automatically from outside when transmitter is not handy 53717 OPEN DOOR INDICATOR: Provides an illuminated
Resumen del contenido incluido en la página 6
Assembmy TO AVOID INSTALLATION DIFFICULTIES, DO NOT RUN THE GARAGE DOOR OPENER UNTIL YOU HAVE COMPLETED STEP 8, PAGE 15. STE P I Assemble Tee Rail & Attach Cable Pulley Bracket ,.,,i ::::= TEE RAIL BACK _' (TO CHASSIS V CAUTION: Do not tighten the lock nuts until bolt ./ /A necks are seated in square holes° TeeRail ///// (End Section___ "eL_ C.r.._e a0, _,_ / ,_/7_ki_ !f 4".20xl/2'' Tee Rail (Center Section '_. Flange PROCEDURE: Place the 3 Tee rail sections on a flat surface for assembly. TH IS
Resumen del contenido incluido en la página 7
Assemb v S=_E P 2 Connect Trolley & Attach Chain Retainer Bracket As a temporary stop, insert a screwdriver into Tee rail as shown. Slide the inner trolley onto the Tee rail, as shown, until it is firmly against the screw- driver, Slide the outer trolley onto the Tee rail until it partially engages the inner trolley and stops TO FULLY ENGAGE TROLLEY: With a hammer, firmly tap the back end of outer trolley just below the rail guide. Outer trolley must move forward to fully engage inner trolley.,
Resumen del contenido incluido en la página 8
Assembly ST_ P 4. Install Chain and Cable DO NOT REMOVE CHAIN AND CABLE FROM DIS. PENSER CA RTON. Master Link Detach cable from side of carton and fasten to trolley with a master link from coin envelope MASTER LINK PROCEDURE: Push pins of master link bar through loop of cable and hole in fiat end of CabIe trolley shaft Push cap onto pins and into notches Slide clip-on spring over cap and into pin notches until both pins are locked in place.. Flat End Troliey Opene{ Chassis Shaft Sprocket Pin Not
Resumen del contenido incluido en la página 9
Ass÷mbUv g_g P 5 Tighten the Chain and Cable OAUTIONt Keep chain from twisting as nuts are turned, PROCEDURE: Connect chain and cable to threaded Loosen Tighten shaft of trolley in the order illustrated: inner nut, lock- Inner Outer washer, chain retainer bracket and outer nut Nut Nut Tighten the chain and cable by threading outer nut toward trolley, Chain is properly tightened when it is approximately 1/2" above the base of Tee rail midway between Chain O Lock Retainer Washer cable pulley brack
Resumen del contenido incluido en la página 10
Instalaation Completed installations of header bracket, door bracket with plate and door arm (depending on door type) are shown below.. The header bracket supports the front end of the Tee rail. The door bracket connects door arm to troltey, IT IS RECOMMENDED THATTH E OPENER BE INSTALLED 7 FEETOR MOREABOVE THE FLOOR WHERE SPACE PERMITS. Follow only those instructions which apply to your door type as shown on Page 5. STEP 1 Install Door Bracket and Plate TO PREVENT DAMAGE TO LIG HTWEIGHTGARAGE DO
Resumen del contenido incluido en la página 11
nstanUation S=_E P 2 Position & Install Header Bracket THE HEADER BRACKET MUST BE RIGIDLY FASTENED TO THE HEADER WALL OR CEILING., REINFORCE WALL OR CEILING WITH 2x4 IF NECESSARY,, Locate height for header bracket by opening door to INSTALLATION highest point of travel as shown. Draw a horizontal SECTIONAL DOOR AND line on header wall 2" above high point This height l-PIECE DOOR WITH TRACK provides travel clearance for top edge of door When headroom is not sufficient for 2" clearance, bottom ed
Resumen del contenido incluido en la página 12
nstamlation STEP 3 Attach Tee Rail to Header Bracket PROCEDURE: Position opener chassis on garage floor below door' and header brackets. Use packing Clevis Pin _- Cotter 5/t6"'x2-3/4- !1j Pin material base to protect cover NOTE: To enable Tee rail to clear sectional door springs, it may be necessary to lift the chassis onto a temporary support. CAUTION: Chassis must either be secured to sup- He8 port or held firmly in place by another person. Bracket Cable Raise Tee rail until cable pulley and
Resumen del contenido incluido en la página 13
UnstaIlation STEP 5 Hang Opener Chassis THE OPENER CHASSIS MUST BE ATTACHED TO A STRUCTURAL SUPPORT OF THE GARAGE Three representative installations are shown_Yours may be different, Hanging brackets should be angled to pro- vide rigid support, PROCEDURE: On EACH side of opener measure Lag Screws the distance from chassis to structural support,, 5/16"xt-7/8"' Cut both pieces of the hanging bracket to required lengths. Flatten one end of each bracket and bend or twist to fit fastening angles_ DO
Resumen del contenido incluido en la página 14
Top INSTALL "WALL CONTROL (OR ADDITIONAL _nsta_lation PUSH BUTTONS) OUTOFTHE REACH OFCHIL- Flange DREN,_ DO NOT ALLOW CHILDREN TO OPER- ATE WALL CONTROL OR TRANSMITTER_ SERIOUS PERSONAL INJURY FROM A CLOS- ING GARAGE DOOR MAY RESULT FROM ANY MISUSE OF OPENER° FASTEN THE CAUTION LABEL ON THE WALL NEAR THE WALL CONTROL AS A REMINDER OF SAFE OPERATING PROCEDURES,. PROCEDURE: There are 4 screw terminals on the i back of the Wall Control Connect the bell wire by color; yellow to yellow, white to whit
Resumen del contenido incluido en la página 15
0nstatUation STEP 8 Connect Electric Power I TO AVOID SERIOUS PERSONAL INJURY FROM ENTANGLEMENT, REMOVE ALL ROPES CON NECTEDTO THE I GARAGE DOOR BEFORE OPERATING DOOR OPENER_ REMOVE EXISTING GARAGE DOOR LOCKS OR USE A WOOD SCREW OR NAIL TO MAKE THE_,_ INOPERATIVE, INSTALLATION AND WIRING MUST BE IN COMPLIANCE WITH LOCAL BUILDING AND ELECTRICAL CODES. OPERATION AT OTHER THAN !2OV 6OHz WILL CAUSE OPENER MALFUNCTION AND DAMAGE, IF LOCAL ELECTRICAL CODES DO NOT REQUI RE PER MAN ENT WIRING: Insert th
Resumen del contenido incluido en la página 16
instal|ation : _ ,rrr_ ....... ................... ,hr ST_ P "I 0 Connect Door Arm to Trolley : ..........:r,, ,, ................. ............. SECTIONAL DOOR INSTALLATION ONLY PROCEDURE: Fasten straight door arm section to trolley and wedge door arm section to door bracket, as shown (A)Insert and spread a cotter pin to secure each connection_ B A !'_ _ .___ ,/II ,ov,s ,n Lock Nut Washers 5/!6"q8 5/16" Do,,, /1 I_1--- Straight Door Bracket Bring the door arm sections together. Find a pair of h
Resumen del contenido incluido en la página 17
nstam ation STE P 11 Adj.,,Limits (All One-Piece Doors Only) CAUTION: To prevent damage to garage doors, the opener limits must be adjusted on ALL ONE- PIECE DOORS, Limit Adjustment settings regulate the points at which door will stop when moving up or down. Repeated operation of the opener during adjustment may cause the motor to overheat and shut off. Simply wait 15 minutes and continue adjustments, Limit adjustment screws are located on the left side panel of the openeras shown Increase limi
Resumen del contenido incluido en la página 18
Adjustment STEP 1 Adjust UP and DOWN Limits ,, ,, ,, _ ,, ....... ,,,, ...... ,,,,,,,,,, The limit adjustment screws are located on the left side panel of the opener chassis as shown LI MITADJUSTMENT settings regulate the points at which the door will stop when moving up or down NOTE: Door STOPS in U P direction if anything interferes with door travel_ Door' REVERSES in DOWN direc- tion if anything interferes with door travel (including binding or unbalanced doors). PROCEDURE: To operate opener,
Resumen del contenido incluido en la página 19
STEP 2 Adjust DO NOT USE FORCE ADJUSTMENTS TO COMPENSATE FOR A BINDING OR STICKING GARAGE DOOR, EXCESSIVE FORCE WILLINTERFERE WITH THE PROPER OPERATION OFTHE SAFETY REVERSE SYSTEM OR DAMAGE THE GARAGE DOOR. Force Adjustment Controls are located on right side panel of the opener chassis,, FORCE ADJUSTMENT settings regulate the amount of power required to open and close the door NOTE: Door STOPS in UP direction if anything interferes with door travel° Door REVERSES in Controls DOWN direction if an
Resumen del contenido incluido en la página 20
THE SAFETY REVERSE SYSTEM TEST iS IMPORTANT. THE GARAGE DOOR MUSTREVERSE ON CONTACT WITH A ON E 1NC H OBSTAC LE PLACED ON TH E FLOOR. FAILU RE TO PROPE R LY ADJ UST TH E OPE N E R MAY RESULT IN SERIOUS PERSONAL INJURY FROM A CLOSING GARAGE DOOR° REPEAT THE TEST AT LEAST ONCE A YEAR AND MAKE ANY NEEDED ADJUSTMENTS, PROCEDURE: Place a 1-inch obstacle on the floor under the garage door Operate the door in the DOWN direction,. The door must reverse on the obstruction if a SECTIONAL door STOPS on the
