Resumen del contenido incluido en la página 1
Installation and
Integrator’s Guide
SMART Mobile Stand
for Interactive Displays
Models FSSBID 100
and FSSBID 100H
Resumen del contenido incluido en la página 2
Product Registration If you register your SMART product, we’ll notify you of new features and software upgrades. Register online at www.smarttech.com/registration. Keep the following information available in case you need to contact SMART Technical Support. Serial Number: ___________________________________________________ Date of Purchase: ___________________________________________________ Trademark Notice SMART Board, smarttech, Senteo and the SMART logo are trademarks or registered tradema
Resumen del contenido incluido en la página 3
Important Information Before you install and use your SMART Mobile Stand, read and understand the safety warnings and precautions in this user’s guide and the included warnings document. These safety warnings and precautions describe the safe and correct operation of your SMART Mobile Stand and its accessories, helping you prevent injuries and equipment damage. Safety Warnings and Cautions WARNING • Failure to follow the installation instructions included with your SMART Mobile Stand for i
Resumen del contenido incluido en la página 4
ii | IMPORTANT INFORMATION • Use the SMART Mobile Stand’s three grab bars to move the unit. Do not press, pull or push on the flat-panel display, interactive overlay or display frame, cabinet, doors, rear access panel plastics or vertical brackets. • Before moving your SMART Mobile Stand, make sure that you unlock the casters. These casters are designed to roll on common indoor surfaces. While you move the unit, your view may be partially obstructed. Be aware of surrounding obstacles. • Do
Resumen del contenido incluido en la página 5
iii | IMPORTANT INFORMATION CAUTION • Make sure that the weight of your flat-panel display is minimum 80 lb. (36.3 kg) and maximum 160 lb. (72.6 kg). For a list of flat-panel displays supported by your SMART Mobile Stand, see http://www2.smarttech.com/st/en-US/Support/FlatPanel/MobileStandPanels. • To prevent damage to a 60" (152.4 cm) or larger flat-panel display when it is installed with a SMART Board for Flat-Panel Displays interactive overlay, make sure that you install the included cle
Resumen del contenido incluido en la página 6
iv | IMPORTANT INFORMATION • Do not block the ventilation slots and openings on your SMART Mobile Stand. Blocking these openings could cause overheating and damage to the unit. • When transporting your unit, repack it with as much of the original packaging as possible. This packaging was designed with optimal shock and vibration protection. • Do not allow liquids, spray cleaners or commercial solvents of any kind to flow into the connection panel. • Do not attempt to service your SMART Mobi
Resumen del contenido incluido en la página 7
Contents Important Information ................................................................................................ i Safety Warnings and Cautions .........................................................................i Other Precautions...........................................................................................iv About Your SMART Mobile Stand............................................................................ 1 SMART Mobile Stand Features....................
Resumen del contenido incluido en la página 8
vi | CONTENTS Model FSSBID 100H: Connecting Devices Inside Your SMART Mobile Stand’s Cabinet ............................................................................. 37 Installing Your SMART Hub SE240.............................................................. 38 Connecting Your Flat-Panel Display............................................................. 41 Connecting Your SMART Hub SE240.......................................................... 43 Connecting Your Computer ...........
Resumen del contenido incluido en la página 9
vii | CONTENTS Covered Electronics Devices........................................................................ 86 China’s Electronic Information Products Regulations................................... 86 U.S. Consumer Product Safety Improvement Act ........................................ 86 D Customer Support ............................................................................................... 87 Online Information and Support......................................................
Resumen del contenido incluido en la página 10
viii | CONTENTS 99-00962-20 REV C0
Resumen del contenido incluido en la página 11
1| ABOUT YOUR SMART MOBILE STAND About Your SMART Mobile Stand Your SMART Mobile Stand is an easy-to-use, fully integrated, height-adjustable stand that adds mobility to select SMART Board interactive displays measuring 50" to 65" (127 cm to 165.1 cm). For a list of flat-panel displays supported by your SMART Mobile Stand, see http://www2.smarttech.com/st/en-US/Support/FlatPanel/ MobileStandPanels. Your SMART Mobile Stand’s prewired cable harness includes the necessary cables for you to eas
Resumen del contenido incluido en la página 12
2| ABOUT YOUR SMART MOBILE STAND SMART Mobile Stand Features Your SMART Mobile Stand is easy to move so that you can share the unit with other users, reconfigure your meeting space or classroom, or quickly add interactive and audiovisual features to a room that might otherwise not have them. The height of your mobile floor stand adjusts quickly and smoothly to improve lines of sight and accommodate users of different heights, including users with limited reach. Feature Highlights Height Adju
Resumen del contenido incluido en la página 13
3| ABOUT YOUR SMART MOBILE STAND Hydraulic Height Adjustment Handle Optional Laptop Shelf • Mounts on Either Side of Your Stand • Adjustable Tilt Angle High-Quality, • Telescopes Outward Integrated Speakers Locking Cabinet for Secure Storage SMART Mobile Stand from the Front 99-00962-20 REV C0
Resumen del contenido incluido en la página 14
4| ABOUT YOUR SMART MOBILE STAND Serial Number Location Connection Panel Large, Removable Cabinet Venting Access Panels SMART Mobile Stand from the Rear 99-00962-20 REV C0
Resumen del contenido incluido en la página 15
5| ABOUT YOUR SMART MOBILE STAND Prominent Grab Bars for Moving Your Unit Supports Integration with a SMART Hub SE240 (Model FSSBID 100H Only) Dedicated Space Adjustable Shelving for a Computer Power Management Swiveling, Lockable, Non-Marking Casters SMART Mobile Stand from the Rear (Lower Panel Removed) 99-00962-20 REV C0
Resumen del contenido incluido en la página 16
6| ABOUT YOUR SMART MOBILE STAND SMART Mobile Stand from the Front with Doors Open Showing Rack Mount Configuration 99-00962-20 REV C0
Resumen del contenido incluido en la página 17
7| ABOUT YOUR SMART MOBILE STAND Power Specifications Your SMART Mobile Stand’s user friendly power management design accommodates up to 1.2 kW and includes the following features: • A country-specific power bar—North America (NEMA) 110V AC or IEC 240V, 50 Hz—which provides power access for additional devices near the bottom rear of your stand • An 8' (2.44 m) country-specific power cord (international only) • A country-specific extension cable • Country-specific power adapters • A USB 2.0 c
Resumen del contenido incluido en la página 18
8| ABOUT YOUR SMART MOBILE STAND Optional Accessories Contact your authorized SMART reseller to order any of the following accessory parts. Optional Laptop Shelf You can order a dedicated laptop shelf if you want to connect a laptop computer to your SMART Mobile Stand. This shelf is designed to mount on either side of your stand, and features an adjustable tilt angle of up to 35 degrees from horizontal. It telescopes outward to accommodate flat-panel displays ranging from 50" (127 cm) to 65
Resumen del contenido incluido en la página 19
9| ASSEMBLING YOUR SMART MOBILE STAND Assembling Your SMART Mobile Stand Your SMART Mobile Stand requires minimal assembly. Consult the SMART Mobile Stand for Interactive Displays Textless Installation Instructions (document 132293 at www.smarttech.com/support) included with your unit for instructions on installing your SMART Mobile Stand. WARNING Failure to follow the installation instructions included with your SMART Mobile Stand for Interactive Displays could result in personal injury
Resumen del contenido incluido en la página 20
10 | ASSEMBLING YOUR SMART MOBILE STAND Environmental Requirements Before installing your SMART Mobile Stand, refer to the following environmental requirements. CAUTION • Never operate your SMART Mobile Stand immediately after moving it from a cold location to a warm location. Allow the unit to reach room temperature before operation to prevent possible product damage. • Do not place your SMART Mobile Stand in hot locations, such as near heating equipment. • Do not block the ventilation slo
