Resumen del contenido incluido en la página 1
Use & Care Guide
Model: 415.16107110
Kenmore®
Liquid Propane Gas Grill
P/N 307010030
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
™
Model 464430111 • Nov-11-10
Resumen del contenido incluido en la página 2
WARNING D ANGER CALIFORNIA PROPOSITION 65 If you smell gas: 1. Combustion by-products produced when using this 1. Shut off gas to the appliance. product contain chemicals known to the State of 2. Extinguish any open flame. California to cause cancer, birth defects, and other reproductive harm. 3. Open lid. 2. This product contains chemicals, including lead 4. If odor continues, keep away from the appliance and lead compounds, known to the State of and immediately call your gas supplier or
Resumen del contenido incluido en la página 3
Table of Contents WARRANTY For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 KENMORE GRILL WARRANTY Grill Information Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Record Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 One Year Full Warranty on Kenmore Grill Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 If this grill fails due to a defect in material or wo
Resumen del contenido incluido en la página 4
LP Tank USE AND CARE • The LP Tank used with your grill must meet the following requirements: • Use LP Tanks only with these required measurements: 12" D ANGER (30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.) capacity maximum. • NEVER store a spare LP cylinder under or near the • LP Tanks must be constructed and marked in accordance appliance or in an enclosed area. with specifications for LP Tanks of the U.S. Department of Transportation (DOT) or for Canada, CAN/CSA-B339
Resumen del contenido incluido en la página 5
e s i w k LP Tank Exchange Connecting Regulator To The LP Tank • Many retailers that sell grills offer you the option of 1. LP tank must be properly secured onto grill. (Refer to replacing your empty LP tank through an exchange service. assembly section.) Use only those reputable exchange companies that inspect, precision fill, test and certify their tanks. Exchange your 2. Turn all control knobs to the OFF position. tank only for an OPD safety feature-equipped tank as 3. Turn LP tank OFF
Resumen del contenido incluido en la página 6
Straight Leak Testing Valves, Hose and Regulator 1. Turn all grill control knobs to OFF. 2. Be sure regulator is tightly connected to LP tank. 3. Completely open LP tank valve by turning OPD hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding by calling Sears for replacement ® parts at 1-800-4-MY-HOME . Hold coupling nut and regulator 4. Brush soapy solution onto areas where bubbles are shown i
Resumen del contenido incluido en la página 7
Safety Tips s Before opening LP cylinder valve, check the coupling nut WARNING for tightness. s When grill is not in use, turn off all control knobs and LP cylinder valve. For Safe Use of Your Grill and to Avoid Serious s Never move grill while in operation or still hot. Injury: s Use long-handled barbecue utensils and oven mitts to • Do not let children operate or play near grill. avoid burns and splatters. • Keep grill area clear and free from materials that s Maximum load for si
Resumen del contenido incluido en la página 8
Burner Flame Check • Remove cooking grates and flame tamers. Light burners, WARNING rotate knobs from HI to LOW. You should see a smaller flame in LOW position than seen on HI. Perform burner Turn controls and gas source or tank OFF when not flame check on sideburner, also. Always check flame prior in use. to each use. If only low flame is seen refer to "Sudden drop or low flame" in the Troubleshooting Section. HI CA UTION LOW If ignition does NOT occur in 5 seconds, turn the burner contr
Resumen del contenido incluido en la página 9
3. Remove carryover tubes and burners. 4. Detach electrode from burner. CA UTION NOTE: Removal/Detachment method will depend on the burner configuration. See different configurations in illustrations below. SPIDER ALERT! 5. Carefully lift each burner up and away from valve openings. We suggest three ways to clean the burner tubes. Use the one easiest for you. SPIDER AND WEBS (A) Bend a stiff wire (a light weight coat hanger works INSIDE BURNER TUBE well) into a small hook. Run the hook thr
Resumen del contenido incluido en la página 10
ON OFF OFF ON OFF ON Indirect Cooking Food Safety Poultry and large cuts of meat cook slowly to perfection on Food safety is a very important part of enjoying the the grill by indirect heat. Place food over unlit burner(s); the outdoor cooking experience. To keep food safe from heat from lit burners circulates gently throughout the grill, harmful bacteria, follow these four basic steps: cooking meat or poultry without the touch of a direct flame. Clean: Wash hands, utensils, and surfaces wi
Resumen del contenido incluido en la página 11
PARTS LIST Key Qty Description Part # Key Qty Description Part # 1 1 LEFT FRONT LEG SH20705006-2 37 5 CONTROL KNOB 302230012 SH20705006-4 205040005 2 1 LEFT REAR LEG 38 1 LEFT FASCIA 302470076 20704006-2 3 2 LEG FEET 39 1 LEFT SIDE SHELF 4 1 RIGHT FRONT LEG SH20705006-3 40 2 TOWEL BAR 205050001 SH20705006-5 SH302480014 5 1 RIGHT REAR LEG 41 2 END CAP, F/ TOWEL BAR, RF/LR 6 1 MATCH HOLDER SH302340001 42 2 END CAP, F/ TOWEL BAR, RR/LF SH302480015 SH20705006-1 206050002 7 1 BOTTOM SHELF 43 1 RIGHT
Resumen del contenido incluido en la página 12
PARTS DIAGRAM 19 54 17 16 18 23 53 53 21 52 52 22 27 25 22 46 20 21 28 41 26 25 25 25 40 49 22 45 24 22 47 42 39 42 38 29 48 34 30 33 31 50 40 44 41 32 36 43 35 36 51 37 11 37 37 14 37 11 37 2 5 15 13 1 7 4 8 55 6 3 10 3 9 12 10 8 12 12 · 464430111
Resumen del contenido incluido en la página 13
ASSEMBLY Bottom Shelf and Legs □ Attach legs to bottom shelf with 1/4-20x2-3/8” machine screws. Be sure that metal tabs on legs 1 face to cart interior as shown. Left Rear Leg Left Front Leg Metal Tabs Right Rear Leg Metal Tabs Right Front Leg Bottom Shelf 1/4-20x2-3/8” Machine Screws Qty. 8 Wheels and Leg Extenders □ Turn cart upside down. 2 □ Insert axle rod through wheel, wheel spacer, right legs, another wheel spacer and wheel. Secure with one axle washer and hitch
Resumen del contenido incluido en la página 14
Side Braces □ Turn cart upright. 3 □ Attach side braces to legs using four 1/4-20x1/2” screws each side. 1/4-20x1/2” Side Brace Machine Screws Qty. 8 Side Brace Front Panels □ Fit one front panel between front legs and attach with two 5/32-32x3/8” machine screws each side. 4 Then attach the front panel to bottom shelf with two 5/32-32x3/8”machine screws. □ Fit the other front panel between front legs and attach with two 5/32-32x3/8” machine screws each side. Then use
Resumen del contenido incluido en la página 15
Tank Exclusion Brace □ Insert the end without hole into the left slot in the front panels, and then use one 5/32-32x3/8” 5 machine screw to attach tank exclusion brace to bottom shelf. 5/32-32x3/8” Machine Screws Qty. 1 Tank Exclusion Brace Back Brace □ Use one 5/32-32x3/8” machine screw each side to attach back brace to rear legs. Attach so that 4 6 holes in back brace face up. Back Brace 5/32-32x3/8” Machine Screws Qty. 2 464430111 · 15
Resumen del contenido incluido en la página 16
Tank Heat Shield □ Use four 5/32-32x3/8" machine screws to attach tank heat shield to back brace on one side. Attach other side under 7 lip of upper front panel as shown. 5/32-32x3/8” Machine Screws Qty. 4 Tank Heat Shield Grill Head □ This step requires two people to lift and position grill head onto card. 4 8 □ Cut tie wraps from regulator hose and remove styrofoam. Carefully lower the grill head onto cart, making sure the regulator hose and sideburner ignition wire are
Resumen del contenido incluido en la página 17
Side Shelf and Fascias □ Use three 5/32-32x3/8” machine screws to attach fascia to left side shelf as shown (A). 9 □ Remove grate from beneath lid of sideburner shelf. Use three 5/32-32x3/8” machine screws to attach fascia to sideburner shelf as shown (B). Left Fascia A 5/32-32x3/8” Machine Screws Qty. 6 Left Side Shelf Right Fascia B Sideburner Shelf 464430111 · 17
Resumen del contenido incluido en la página 18
Left Side Shelf □ Loosen the preassembled screws in the left rear leg and front of firebox, shown A, to within 1/8" of 10 surface. Hang left side shelf onto the screws through the keyhole slots in the shelf. Fully tighten all screws. □ Use two 1/4-20x1/2” machine screws to attach left side shelf to firebox from inner firebox as shown (B). A 1/4-20x1/2” Machine Screws Qty. 2 B 18 · 464430111
Resumen del contenido incluido en la página 19
SideBurner Shelf □ Loosen the preassembled screws in the right rear leg and front of firebox, shown A, to within 1/8" of 11 surface. Hang sideburner shelf onto the screws through the keyhole slots in the shelf. Fully tighten all screws. □ Use two 1/4-20x1/2” screws to lock side burner shelf with firebox as shown (B). Replace sideburner grate. A 1/4-20x1/2” Machine Screws Qty. 2 B 464430111 · 19
Resumen del contenido incluido en la página 20
Side Burner Valve and Bezel □ Remove the two screws, shown A, preassembled to the sideburner valve. 12 □ Insert the sideburner valve control stem through the fascia and sideburner bezel, shown A. Use the two previously removed screws to attach sideburner valve to fascia and bezel. □ Insert sideburner valve into sideburner tube. Use two 5/32-32x3/8 screws to tighten sideburner bowl, shown B. A Sideburner Bezel Sideburner Tube B 5/32-32x3/8” Machine Screws Qty. 2 Sideburner Valve
