Resumen del contenido incluido en la página 1
OPERATOR'S MANUAL
@
Liquid Propane Gas (LPG) Grill
Model 119.162300
• Safety
• Assembly
• Use and Care
• Cooking Guide
• Frequently Asked Questions
• Failure to comply with these instructions could
Call us first if you have any problem with this
result in a fire or explosion that could cause
product. We can help you with questions about
serious bodily injury, death or property damage.
assembly and grill operation or if there are
damaged or missing parts when you unpack this
• Whether this grill
Resumen del contenido incluido en la página 2
Primary Safety Warnings ........................... 1-3 IF YOU SMELL GAS: Warranty Terms and Conditions ................... 2 1. Shut off gas to the appliance. Pre-Assembly Instructions ............................ 3 2. Extinguish any open flame. Part Diagram and Lists ............................. 4-10 3. Open lid. Assembly Instructions ............................ 11-21 4. If odor continues, keep away Regulator & Hose Instructions, Gas Tank from the appliance and immediately Instructions .....
Resumen del contenido incluido en la página 3
Failure tocomply withthese instructions could Liquid Propane Gas (LPG) grill models must be result ina fire or explosion that could cause used with the liquid propane gas regulator assembly supplied. Any attempt to convert the serious bodily injury, death or property damage. grill from one fuel type to another is extremely Spiders and small insects can spin webs and hazardous and will void the warranty. nest in the grill burner tubes during transit and Never use your gas grill in a garage, porch
Resumen del contenido incluido en la página 4
PART# PART DESCRIPTION QTY PURPOSE OF PART SB0027 Phillips Head Bolt M6x5/8" 20 Install Casters, Attaches Firebox and Cabinet Assembly. Attaches Cabinet Front Crossbar, Side Burner Assembly, SB0004 20 Phillips Head Bolt M6x3/8" and Side Shelf Assembly. There are 34 Washers in the place where the screws SB0005 Washer M6 34 M6 are used Attaches Cabinet Door Shield and Control Panel to SB0009,SB0009D 12 Phillips Head Bolt M4x5/16" Firebox and Control Knob to Control Panel SB0029 8 Attaches Cabinet
Resumen del contenido incluido en la página 5
Item No, Part # Description Qty Graphic 06WIC-C Cabinet Assembly J \\\\\\V _ Cabinet Front Crossbar SA0421 Side Burner Frame 06WIC-D SA0414 Warming Rack Cooking Grate CI0008(Large) (Large -9.5" 2pc CI0009(Small) Small-7.5" lpcs) Heat Diffuser SA0415 SE0077 Grease Pan Support
Resumen del contenido incluido en la página 6
Item No. Part # Description Qty Graphic Grease Pan SA0375 06WIC-A, Firebox Assembly 06WIC-B SA0322,SA0323, Cabinet Left Door SE0087,SA0420-1 SA0322,SA0323, Cabinet Right Door SE0087,SA0420-1 Condiment Basket SE9027 SA0326, Side Burner Control Panel SA0423 SA0327, Side Shelf Control Panel SA0428
Resumen del contenido incluido en la página 7
Item No. Part # Description Qty Graphic O-1 Caster SE0056 T 0-2 SE0057 Locking Caster 0-3 Swivel Caster SE0081 0-4 SE0055 Locking Swivel Caster 06WIC-E Side Shelf Assembly Side Burner Top Panel SA0325,SA0423, Q SA0424 Side Shelf Top Panel SA0325,SA0427, SA0428
Resumen del contenido incluido en la página 8
Item No. Part # Description Graphic Qty Side Burner Front Bracket SA0394 Side Shelf Front Bracket SA0402 SE0085 Cylinder Support Ring SA0320-3 Grease Tray
Resumen del contenido incluido en la página 9
\
Resumen del contenido incluido en la página 10
KEY Description Part # QTY I Thermometer SE0076 I 2 Name Plate ZA0015 I 3 Hood Bolt Assembly SB0001-1/SB0002-1/SB0003-1 2 4 Hood SA010 I-A/SA0404- I/SA0405 I 5 Heat Insulator for Hood Handle PE0010 2 6 Hood Handle Connector ZA0010 2 7 Hood Silicon Stopper PE0001 2 8 Hood Handle RSA0004 I 9 Back Burner Cover SA0413 1 10 Firebox Back Top Panel SA0412 1 11 Warming Rack SA0414 1 12 Back Burner SD0006 1 13 Flame Sensor SC0014 1 14 Flame Sensor Support SA0030 1 15 Back Burner Electrode St0850 1 16 Bac
Resumen del contenido incluido en la página 11
KEY Description Part # QTY 34 Electric Igniter SE0010 1 35 Side Shelf Back Support SA0403 1 36 Side Shelf Frame SA0426 1 37 Side Shelf Front Support SA0402 1 38 Side Shelf Control Panel SA0327 1 39 Firebox Right Panel SA0451 1 40 Side Burner Cover SA0390 1 41 Side Burner Grate CI0011 1 42 Side Burner Inner Frame SA0396 1 43 Side Burner Back Support SA0395 1 44 Side Burner Shelf Frame SA0389 1 45 Side Burner Electrode SE0083 1 46 Side Burner CI0010 1 47 Side Burner Front Support SA0394 1 48 Side
Resumen del contenido incluido en la página 12
Please refer to pages 5 through 8 for item graphics. Install Casters ill [] Place the Cabinet Assembly (A) upside down and attach the 4 Casters to the Caster Seats. Use care to install each Caster into the correct position. 01 O3 ./ 02 Phillips Head Bolt: M6x5/8" (with blue paint) Qty: 16 Part # SB0027 © Washer: M6 Qty: 16 Part # SBO005 Install Cylinder Support Ring, Cabinet Front Crossbar and Cabinet Door [] Put the Cylinder Support Ring (U) into two holes in left side cabinet frame. See Inset
Resumen del contenido incluido en la página 13
Install Condiment Basket and Cabinet Door Stopper [] Hang the Condiment Basket (L) inside of the Cabinet Right Door (K) as shown. [] Attach the Cabinet Door Stopper to the Cabinet Bottom Panel using 2 M4x5/16" Phillips Head Bolts and 2 M4 Washers. Phillips Head Bolt: M4x5/16" (Black) Qty: 2 Part # SB0009 Washer: M4 Qty: 2 Part # SB0016 Cabinet Door Stopper Qty: 1 Part # SA0422 Install Firebox Assembly to Cabinet Assembly and Install Grease Tray to Firebox Assembly [] Place the Firebox Assembly (
Resumen del contenido incluido en la página 14
Install Grease Pan Support and Grease Pan [] Attach Grease Pan Support (G) to the Grease Tray using 2 MS Nuts. See Insets 1 and 2. [] Install the Grease Pan (H) into the Grease Pan Support (G), inserting it from the front of the cabinet. See Inset 3. Inset 1 Inset 2 © Nut: MS qty: 2 Part # SB0019 Inset 3 Assemble Side Burner Assembly [] Attach Side Burner Top Panel (Q) and Side Burner Front Bracket (S) to the Side Burner Frame (C), using 3 Phillips Head Bolts. Phillips Head Bolt: M6x3/8" Qty : 3
Resumen del contenido incluido en la página 15
Install Side Burner Control Panel to Side Burner Assembly [] Attach Side Burner Control Panel (iv]) to Side Burner Assembly using 3 Phillips Head Bolts and 2 Washers. Do not use a Washer on the end Bolt. No Washer Phillips Head Bolt: M4x5/16" (Black) Qty: 3 Part # SB0009 With Washer Washer: M4 Qty: 2 Part # SB0016 Install Side Burner Assembly to Firebox Assembly, [] Loosely screw 2 Phillips Head Bolts (M6x3/8") and 2 Washers into the upper left and right corner holes in the left side of the fire
Resumen del contenido incluido en la página 16
Secure Side Burner Assembly to the Firebox Assembly [] Use 1 Phillips Head Bolt and 1 Washer from inside of the firebox to secure attached Side Burner Assembly as shown. Phillips Head Bolt: M6x3/8" Qty: 1 Part # SBO004 Washer: M6 Qty: 1 Part # SBO005 Secure Side Burner Valve and Control Knob to Side Burner Control Panel [] Insert the side burner valve stem up through the hole in the Side Burner Control Panel (M). See Inset 1. [] Insert side burner valve stem into the side burner tube. See Inset
Resumen del contenido incluido en la página 17
Attach Side Burner Control Panel to Firebox Assembly and attach Side Burner Ignition Wire [] Use 1 Phillips Head Bolt (iV14x5/16") to secure the Side Burner Control Panel (H) to the Firebox Assembly (I) as shown. See Inset 1. [] Slide the side burner ignition wire over the side burner igniter connector. See Inset 2. Phillips Head Bolt: M4x5/16" (Black) Qty: 1 Part # SB0009 Inset 2 Inset 1 \\\\IIII !,, 0 Assemble Side Shelf Assembly [] Attach the Side Shelf Top Panel (R) and Side Shelf Front Brac
Resumen del contenido incluido en la página 18
_1 Install Side Shelf Control Panel to Side Shelf Assembly [] Attach Side Shelf Control Panel (N) to Side Shelf Assembly using 3 Phillips Head Bolts and 2 Washers. Do not use a Washer on the end Bolt. Washer : N4 Qty: 2 With Washer Part # SB0016 No Washer Philip Head Bolt: M4x 5/16" (Black) Qty: 3 Part#: SBO009 _1_ Install Side Shelf Assembly to Firebox Assembly. [] Loosely screw 2 Phillips Head Bolts (M6x3/8") and 2 Washers into the upper left and right corner holes in the right side of the fir
Resumen del contenido incluido en la página 19
Secure Side Shelf Assembly to the Firebox Assembly [] Use 1 Phillips Head Bolt and 1 Washer from inside of firebox to secure attached Side Shelf Assembly. Phillips Head Bolt: M6x3/8" Qty: 1 Part # SB0004 Washer: M6 Qty: 1 Part # SBO005 Place Heat Diffusers, Cooking Grates, and Warming Rack into the Firebox Assembly [] Place the Heat Diffusers (F) into the Firebox Assembly (1), Ensure the fronts of the Heat Diffusers, maked "FRONT', are at the front of the firebox. [] Place the Grates (E) into th
Resumen del contenido incluido en la página 20
Place LP Cylinder into the Cabinet [] Unhook the cylindersupport ringand hold attop ofcabinet. [] Placethe LP cylinderdown intothe tank support hole inthe bottom ofthe cabinet.Ensure the valvefaces tothe front. [] Wrap the cylindersupport ringaround the top ofthe tank and hook to secure the LP cylinder in place. \ Attach Regulator Hose Support Ring to Cabinet Side Panel m [] Remove the nut from the bolt on the inside of the left cabinet side panel, It's located towards the top of the side panel
