Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor
Resumen del contenido incluido en la página 3
- Content - Product Introduction............................…………………………………...4 Package Contents…………………………………………………………4 Overview…………………………………………………………………..5 Charging Your Headset……………………………………….…………..7 Turn ON/OFF Your Headset…………………………...…….…………..8 Using Your Headset for the first time……………………..….…………..9 Pair Your Headset and Cell Phone…………………………………....10 Wearing Your Headset with Best Performance………………………....10 Another Ear Use………………………………………………………....11 Using Your Headset…………………………
Resumen del contenido incluido en la página 4
- Product Introduction - Gain more freedom with the novel Bluetooth® Headset BT400 G5 while you’re out for an amble or in for a meeting. The imperceptible wireless connection is reach to 10 meters and needs no any line of sight of your mobile phone, free your hands. Moderate talk and standby time add to the easy and pleasurable experience. A flexible ear hook which not only provides wear elasticity but also gives a cosy wear experience, additionally the sturdy conjunction makes the
Resumen del contenido incluido en la página 5
- Overview - The headset includes several parts: Talk/Transfer Button: The button is used for 2 functions. - Talk : Answers or ends the call. - Transfer : switches an active call between the headset and the cell phone. Indicator LED: Displays the current status of the headset. - Blue Blinking: the headset is in normal status. - Red Blinking: the headset is in low power status. - Blue & Red Blinking: the headset is in pairing mode. Power/Mute Button: The button is used for
Resumen del contenido incluido en la página 6
- Headset Operations - Function Corresponding Button Action To power on, press and hold the button for 6 seconds, the Power on / < POWER/MUTE > indicator LED blinks BLUE. Power off button To power off, press and hold the button for 2 seconds, the indicator LED blinks RED twice and then snuffs out. Make sure the headset is powered off. Press and hold the < POWER/MUTE > Enter pairing mode button for 8 seconds, the indicator LED blinks BLUE and button RED. Make a voice dial < TALK/TRAN
Resumen del contenido incluido en la página 7
- Charging Your Headset – Before using your headset at the first time, it’s highly recommended to charge its self-contained battery for at lease 2 hours. A fully charged headset battery provides approximately 5 hours talking time and 250 hours standby time(In standby mode, the headset is powered on but no call is in progress). The headset indicator LED displays BLUE when the headset power is sufficient. When the headset is running out of power, the headset indicator starts to blink RE
Resumen del contenido incluido en la página 8
Battery Notice! 1. Over extended periods of time, battery gradually wears down and requires longer charging time. The situation is normal. Additionally, the more you talk on the phone with the headset, the less standby time your battery has. 2. Risk of explosion if battery is replaced by incorrect type or is thrown into fire. 3. Do not store the headset in hot areas. High temperatures can shorten the life of internal electronic components, damage battery, and warp or melt certain plastics.
Resumen del contenido incluido en la página 9
- Using Your Headset for the first time – 1. Charge the headset for at least 2 hours to make sure the headset is fully charged. 2. Make sure that your phone is powered on. 3. Power on the headset. 4. Configure your phone’s Bluetooth function and make sure it’s activated. 5. Set the phone to search for Bluetooth devices, the phone searches for all Bluetooth devices within about 10 meters and then displays them as a list. 6. Pair the headset with your phone. 7. Start using the headset wh
Resumen del contenido incluido en la página 10
- Pair Your Headset and Cell Phone - ® NOTICE!! You must pair the headset with a Bluetooth phone before you can use the headset! Step 1 > Please make sure the headset is turned OFF. Step 2 > Press and hold the < POWER/MUTE > button approximately 7 seconds until the headset indicator LED starts to blink BLUE and RED color. Step 3 > Release the < POWER/MUTE > button when the indicator LED is flashing Step 4 > Follow the operating instruction for your Bluetooth phone to start a pairing pro
Resumen del contenido incluido en la página 11
- Another Ear Use - The ear hook wear can be easily changed for another ear by below four steps: Step 1 & Step 2 : Hold the side of ear hook that is close to the axis of the headset, and then revolve the ear hook to 90 degrees twice. The ear hook will give out a clear sound while it’s in 90 degrees position. Step 3 & Step 4 : Rotate the ear hook to another side of the headset. - Using Your Headset - [ Answering a call ] After being paired to your phone, the headset is now ready t
Resumen del contenido incluido en la página 12
[ Making a call ] There are two ways to make a call: 1. Using the phone’s keypad: As general usage, dial the phone number you want to call by pressing the phone’s designated keypad. You may also hear the dialing tones through the headset. 2. Using the Voice Dialing through the headset: What is voice dialing? Voice dialing is a feature on some Bluetooth phones which allows you make calls by saying the name of the person you want to call. The phone compares your voice with your previous
Resumen del contenido incluido en la página 13
[ Mute ] This function is available for ongoing call only. To activate mute function: Press the < POWER/MUTE > button once while there’s an ongoing call is in progress. To deactivate mute function: Press the < POWER/MUTE > button to release the mute. [ Transfer ] To activate transfer function: Press the < TALK/TRANSFER > button for 2 seconds to switch the current call from headset to cell phone. NOTICE! Not all Bluetooth phones support transfer function, please refer to your phone’s
Resumen del contenido incluido en la página 14
14
