Manual de instrucciones de LOREX Technology DCC1020

Resumen del contenido incluido en la página 1

Camera Features
Camera Features
• Patented Mirroring Technology Makes Camera Invisible to the Human Eye Yet Allows The
Camera to Properly View
• Security Mirror Form Factor is Ideal
for Commercial/Retail Applications
• Cable Pass-through Wall Mount
Bracket Conceals and Protects
Connection Cables
• Ceiling flush mountable or wall
mountable using included cable pass-
through bracket.

Ceiling Flush
Wall Mount

Mount











Package Contents











1 x

Resumen del contenido incluido en la página 2

Mounting Options Mounting Options The Camera can be installed to a wall or ceiling, or can be ceiling flush mounted using included cable pass-through bracket. Wall Mounting: 1. Mount the camera to the desired mounting surface by firmly attaching the Mounting Bracket using 4 screws (at points listed as Screws 1~4 on the below diagram). 2. Use the Hex Adjustment Key to set the desired angle of the camera (at points A, B and C on the

Resumen del contenido incluido en la página 3

Installing the Camera & Optional Extension Cable Ceiling Mounting: 1. Remove the Mounting Bracket from the back of the Camera (4 screws) 1 2. Drill a hole in the ceiling large enough to pass the BNC/Power Cable through. NOTE: If using the Ceiling Mounting method, run the Extension Cable to the location prior to mounting the Camera. 3. Connect the BNC/Power Cable end of the Camera to the BNC/Power connections on the Extension cable before installing the Camera Base. 4 4. Sc

Resumen del contenido incluido en la página 4

Installing the Camera & Optional Extension Cable Installing the Camera & Optional Extension Cable 1. Connect the optional Extension cable to the Camera: • Connect the BNC & Power ends of the cable to the Camera • Connect the Power Adaptor connector to the AC Power Cable attached to the camera. Remember to check the ends of the cable before permanent installation, as the power connection ends are different (one side has a female barrel power connection, and one

Resumen del contenido incluido en la página 5

Camera Specifications Camera Specifications 1/3” Color CCD Image Sensor Image Sensor Type Video Format NTSC 510H x 492V (251K) Effective Pixels Horizontal Resolution 420 TV Lines Scan System 525 Lines 2:1 Interlace Internal Sync System S/N Ratio More than 52dB without AGC AES Iris AES Shutter Speed 1/60 ~ 1/120,000 Min Illumination 0.2 LUX (Sens-up up to x32) Video Output Composite 1.0Vp-p @ 75ohms Audio Output Not Supported Fixed 3.6mm F2.0 Lens / Focal Length FOV (Diagona