Manual de instrucciones de Pelco ICS200

Resumen del contenido incluido en la página 1

™
®
Integrated Camera Systems from Pelco
™
Congratulations on receiving Pelco’s Camclosure Point of Sale (POS) Display.
This display is provided to demonstrate the high quality, compact size, and
aesthetic value of Pelco’s Camclosure Integrated Camera Systems.
Your Point of Sales Display contains:
1 Pre-assembled POS Countertop/Wall Mount Display
1 ICS100 Series Surface Mount Dome
1 ICS150 Series In-ceiling Dome - Includes black and white
camera with 6mm lens
1 ICS200 Series Wedge Enclosure
1 IC

Resumen del contenido incluido en la página 2

POS SETUP The Camclosure Point of Sale (POS) Display can be used as a freestanding exhibit or directly mounted to a wall. Freestanding Display 1. Install the two support brackets to the back of the display (refer to Figure 1). 2. Reposition the ICS300 enclosure located on the front of the display (refer to Figure 2). Loosen the locking collar at the base of the ICS300 and reposition the enclosure downward. 3. Pull wiring for power and video. a. Connect the video cable. (Monitor is not supplied.)