Manual de instrucciones de Pelco RMA14S

Resumen del contenido incluido en la página 1

C1956M-A (10/03)
RMA14S
Rack Mount Kit
®
3500 Pelco Way
WARNINGS
Clovis, CA 93612-5699
Observe the following warnings before installing and using this product.
USA
In North America & Canada:
1. Installation and servicing should be done by qualified service and installation personnel only.
Tel (800) 289-9100
FAX (800) 289-9150
2. Installation should be done according to all local and national electrical and mechanical
codes, using only approved materials.
International Customers:
Tel (1-559) 292-

Resumen del contenido incluido en la página 2

4. Hold the assembled rack mount in the rack or console, align the mounting holes of the rack mount with the mounting holes in the rack or console, and insert and tighten the required fasteners (not supplied). 5. Slide the monitor into the front of the rack mount as far as it will go. 6. If using in an overhead or slanted application, install the bracket retainers (item 3) as shown in Figure 1. SPECIFICATIONS Construction: Steel Finish: Black polyester powder coat Dimensions Inside: 13.33" H x 1