Resumen del contenido incluido en la página 1
4-239-402-11 (2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located at the rear. Record the serial number in the
space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. Serial No.
CMT-CP101
© 2002 Sony Corporation
Resumen del contenido incluido en la página 2
Note to CATV system installer: WARNING This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that To prevent fire or shock hazard, do not provides guidelines for proper grounding and, in expose the unit to rain or moisture. particular, specifies that the cable ground shall be To avoid electrical shock, do not open the cabinet. connected to the grounding system of the building, as Refer servicing to qualified personnel only. close to the point of cab
Resumen del contenido incluido en la página 3
Table of Contents List of Button Locations and Sound Adjustment Reference Pages Adjusting the sound ............................. 15 Main unit ............................................... 4 Remote Control ..................................... 5 Display Using the display ................................. 16 Getting Started Hooking up the system .......................... 6 Other Features Inserting two size-AA (R6) batteries into Falling asleep to music the remote control ......................
Resumen del contenido incluido en la página 4
List of Button Locations and Reference Pages Illustration number How to use this page r Use this page to find the location of buttons and other PLAY MODE qg (9, 13, 14) parts of the system that are mentioned in the text. RR Name of button/part Reference page Main unit ALPHABETICAL ORDER BUTTON DESCRIPTIONS A – R T – V @/1 (power) 1 (7, 10, 15, 17) BASS wd (15) TAPE EJECT Z 6 (12) CD EJECT Z qg (8) TAPE z REC 5 (13) CD SYNC qa (13, 14) TAPE Y 8 (12–14) CD u qj (8, 9) TAPE X 0 (12–14) CD x qh (8–1
Resumen del contenido incluido en la página 5
List of Button Locations and Reference Pages Remote Control ALPHABETICAL ORDER BUTTON DESCRIPTIONS X 4 (8, 12–14) A – M S – V x 5 (8, 9, 12–14) ./> 6 (7–10, 14, 15, 17) CD REPEAT qk (8) SLEEP qf (16) m/M 7 (8, 10–12) CD N ws (8, 9) TAPE Y w; (12–14) @/1 (power) 3 (7, 15, 17) DIR MODE ql (12–14) TIMER SELECT qs (15, 17) z REC 8 (13) DISPLAY 2 (11, 16) TIMER SET qg (7, 14, 17) DSG 1 (15) TUNER/BAND wa (10) ENTER qd (7, 10, 15, 17) TUNING MODE/PLAY MODE q; (8, 9, 10, 11, 14) FM MODE 9 (11) VOL +/–
Resumen del contenido incluido en la página 6
Getting Started Hooking up the system Follow steps 1 through 4 of the procedure below to hook up your system using the supplied cords and accessories. AM loop antenna FM antenna Right speaker Left speaker 2 1 3 4 1 Connect the speakers. Connect the right and left speaker cords to the SPEAKER terminals as shown below. Jack type A Solid (3) Extend the FM wire AM loop antenna horizontally antenna Stripe (#) Ω Insert this portion Jack type B 2 Connect the FM and AM antennas. Extend the FM Set the AM
Resumen del contenido incluido en la página 7
Getting Started 3 For models with a voltage selector, set Setting the clock VOLTAGE SELECTOR to the local power line voltage. 1 Turn on the system. 110V-120V 2 Press TIMER SET on the remote. 3 Press ./> on the remote 220V-240V repeatedly to set the hour. VOLTAGE 4 Press ENTER on the remote. SELECTOR The minute indication flashes. 4 Connect the power cord to a wall outlet. 5 Press ./> on the remote If the plug does not fit the wall socket, repeatedly to set the minute. detach the supplied plug ad
Resumen del contenido incluido en la página 8
CD 2 Press PLAY MODE (or TUNING MODE/ PLAY MODE on the remote) repeatedly Loading the CD until the mode you want appears in the display. 1 Press CD EJECT Z. To play Select The disc tray slides out. No display The CD in original order. SHUFFLE The tracks on the CD in random 2 Load a CD onto the disc tray. order. PGM The tracks on the CD in any order that you want (see “Programming the CD tracks” on Load with the page 9). label side up. When you play a CD single 3 Press CD u (or CD N on the remote
Resumen del contenido incluido en la página 9
CD/Tuner Tuner Programming the CD Presetting radio stations tracks You can preset up to 20 FM stations and 10 –– Program Play AM stations. You can then tune in any of those stations simply by selecting the corresponding You can make a program of up to 24 tracks on preset number. a CD in any order that you want. There are two ways to store the station presets. 1 Press FUNCTION repeatedly until “CD” To Method appears in the display. Automatically tune Automatic Tuning Preset 2 Press PLAY MODE (or
Resumen del contenido incluido en la página 10
6 Press ./> on the remote Presetting radio stations (continued) repeatedly to select the preset number that you want. 5 Press MEMORY on the remote. 7 Press ENTER on the remote. A preset number flashes. The station is stored to the selected preset PRESET STEREO number. TUNED 8 Repeat steps 2 through 7 to preset 1FM1005 MHz other stations. Other Operations Preset number Frequency To Do this 6 Press ./> on the remote Tune in a station Follow the procedure described in repeatedly to select the pres
Resumen del contenido incluido en la página 11
Tuner CD/Tuner Listening to the radio Using the Radio Data System (RDS) You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. (European model only) Listening to a preset station What is the Radio Data System? — Preset Tuning Radio Data System (RDS) is a broadcasting Preset radio stations in the tuner’s memory first service that allows radio stations to send (see “Presetting radio stations” on page 9). additional information along with the r
Resumen del contenido incluido en la página 12
Tape Other Operations Loading a tape Do this To Stop playback Press TAPE x. 1 Press TAPE EJECT Z. Pause Press TAPE X (or X on the remote). Press again to 2 Load a recorded/recordable tape into resume playback. the cassette holder. Fast-forward or With the tape stopped, press With the side you want to play/ rewind TAPE m/M. record on facing towards you Remove the tape Press TAPE EJECT Z. Z x Y m M zX ?/1 Playing a tape You can use Type I (normal) tape. 1 Load a recorded tape into the cassette h
Resumen del contenido incluido en la página 13
Tape Recording to a tape –– CD Synchro Recording/Recording Manually/Program Edit You can record from a CD (or connected components) or radio. You can use Type I (normal) tape. Recording from a CD Recording manually Steps (CD Synchro Recording) Load a recordable tape into the cassette holder. 1 Press FUNCTION repeatedly to select Load a CD onto the disc tray. 2 the source you want to record from. Load a CD (or other music source), or Press FUNCTION repeatedly until “CD” 3 appears in the display.
Resumen del contenido incluido en la página 14
Recording to a tape (continued) To place a specific number of tracks on each side of the tape during CD Synchro Recording Recording CD tracks in your 1 Program the tracks for the first side by favorite order doing steps 1 to 6. –– Program Edit 2 Press X on the remote. 3 Program the tracks for the other side by 1 Load a recordable tape into the doing steps 5 and 6. cassette holder. 4 Do steps 7 to 9 (see Note below). 2 Load a CD onto the disc tray. When the X command is detected during 3 Press FU
Resumen del contenido incluido en la página 15
Tape Sound Adjustment Sound Adjustment 6 Set the starting time. Press ./> on the remote repeatedly to Adjusting the sound set the hour, then press ENTER on the remote. Generating a more dynamic sound The minute indication begins flashing next. (Dynamic Sound Generator) Press ./> on the remote repeatedly to set the minute, then press ENTER on the Press DSG. remote. To cancel the DSG, press DSG again. “OFF TIME” appears, then the hour Adjusting the bass indication flashes again. Turn BASS. 7 Set t
Resumen del contenido incluido en la página 16
Display Other Features Using the display Falling asleep to music — Sleep Timer Checking the remaining time The Sleep Timer Function lets you specify a (CD) sleep time, after which the system stops playing and turns off automatically. You can thus fall Press DISPLAY on the remote during play. asleep to music. Each time you press the button, the display changes cyclically as follows: Press SLEEP on the remote repeatedly. The sleep time changes as follows: Current track number and elapsed playing
Resumen del contenido incluido en la página 17
Display/Other Features 1 Prepare the music source you want to 8 Press ./> on the remote listen to when the system turns on. repeatedly until the music source you want appears. • CD: Load a CD. To start playing from a specific track, make a program (see The display changes as follows: “Programming the CD tracks” on page 9). t TUNER y CD T • Tape: Load a tape with the side you want t TAPE T to play facing towards you. 9 Press ENTER on the remote. • Radio: Tune in the preset radio station The s
Resumen del contenido incluido en la página 18
Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. MD deck / VCR MD deck From the audio output To the digital input jack of jacks of an MD deck / an MD deck VCR A AUDIO IN (MD/VIDEO) jacks Listening to audio from a Use audio cords (not supplied) to connect an MD deck or VCR to these jacks. You can then connected component listen to analog audio from the MD deck or VCR th
Resumen del contenido incluido en la página 19
Optional Components/Troubleshooting Troubleshooting Speakers Problems and remedies Sound comes from only one channel, or the left and right volumes are unbalanced. Should you encounter a problem with your • Check the speaker connections and placement. system, do the following: 1 Make sure the power cord and speaker cords are correctly and firmly connected. CD Player 2 Find your problem in the troubleshooting checklist below and take the indicated The CD will not play. corrective action. • The CD
Resumen del contenido incluido en la página 20
Problems and remedies (continued) Tuner There is a severe hum or noise (“TUNED” or “STEREO” flashes). • Adjust the antenna. • The signal strength is too weak. Connect an external antenna. • Make sure that the antenna is connected properly. • Do not bend or roll up the antenna. • The two wires comprising the FM antenna have been pulled further apart since the system was first purchased. Repair or replace with a new one. • The AM antenna wire is detached from the stand. • Keep the antennas as fa
