Manual de instrucciones de Optimus PRO SW-200P

Resumen del contenido incluido en la página 1

40-4081.fm Page 1 Wednesday, August 11, 1999 11:02 AM
Cat. No.
40-4081
PRO SW-200P 200-Watt Powered Subwoofer
Your subwoofer has an adjustable
high cut filter and high and low level in-
puts so it is easy incorporation into ex-
isting systems or it as an integral part
of a subwoofer/satellite combination.
It also has these features:
Auto On/Off — Automatically switch-
es the PRO SW-200P’s amplifier to
standby if the subwoofer does not re-
ceive a signal for 8–11 minutes.
Power Indicator — T

Resumen del contenido incluido en la página 2

40-4081.fm Page 2 Wednesday, August 11, 1999 11:02 AM This symbol is intended to inform — Controls the high Frequency Hz you that important operating and frequency cutoff point. Rotated fully maintenance instructions are includ- clockwise, it cuts high frequencies ed in the literature accompanying over 200 Hz. Rotated fully counter- this product. clockwise, it cuts high frequencies over 50 Hz. SAFETY INSTRUCTIONS — Lets you control Remote Control the PRO SW-200P’s volume from up • Never ope

Resumen del contenido incluido en la página 3

40-4081.fm Page 3 Wednesday, August 11, 1999 11:02 AM Although low frequencies are non-di- Cautions: rectional, factors such as room reflec- • To prevent fire or shock, do not tions, standing waves, resonance and expose this subwoofer to rain or absorption strongly affect your sub- moisture. woofer’s performance. For maximum • Do not place the subwoofer with bass output, place your subwoofer in a its metal plate against the floor. corner. To reduce output, move it away from corners and back w

Resumen del contenido incluido en la página 4

40-4081.fm Page 4 Wednesday, August 11, 1999 11:02 AM If you connect your PRO SW- Note: Connecting to Line Out 200P to your amplifier/receiver’s line Terminals out terminals and your amplifier/re- ceiver has a line out selector switch, Your amplifier/receiver’s line out jacks be sure to switch it to the correct might be labeled either REC OUT or source. PRE OUT. Amplifier/Receiver Left Right Output Termina Speaker Speaker Connecting to Speaker Terminals Connect the amplifier/receiver’s sp

Resumen del contenido incluido en la página 5

40-4081.fm Page 5 Wednesday, August 11, 1999 11:02 AM If you use MEGACABLE or any other CONNECTING TO high quality, low gauge speaker wire, POWER the terminals will be too small to ac- commodate the wires from both the Plug the PRO SW-100P’s AC power left (or right) speaker and the PRO cord into an AC outlet. SW-200P. You need two pairs of Speaker Pins (RadioShack Unlimited No. 10458503) to make the connec- ADJUSTING THE tion. Follow these steps to connect the wires to each terminal usi

Resumen del contenido incluido en la página 6

40-4081.fm Page 6 Wednesday, August 11, 1999 11:02 AM ADJUSTING THE HIGH CARE AND CUT FREQUENCY MAINTENANCE FREQUENCY HZ adjusts the level (be- Your Optimus PRO SW-200P 200- tween 50 Hz and 200 Hz) at which the Watt Powered Subwoofer is an exam- subwoofer begins passing frequen- ple of superior design and craftsman- cies to other speakers. This control’s ship. The following suggestions will setting depends on the low frequency help you care for your subwoofer so capabilities of your satellit

Resumen del contenido incluido en la página 7

40-4081.fm Page 7 Wednesday, August 11, 1999 11:02 AM • To maintain the cabinet’s finish, do not let it come into contact with water vapor, alcohol, benzene, insecticide, or similar liquids. Do not place a plastic covering on top of the cabinet, as the plastic’s color could come off and stick to the finish. Clean the subwoofer cabinet with a soft, dry cloth. • Never touch the subwoofer ele- ments with your hands or expose them to excessive shocks. If the subwoofer is dented or bent, the sound

Resumen del contenido incluido en la página 8

40-4081.fm Page 8 Wednesday, August 11, 1999 11:02 AM SPECIFICATIONS Amplifier Output .............................................. 200 W RMS (4 Ohms @ 1% THD) Crossover .......................................................................... 50 Hz–200 Hz Variable Frequency Response ...................................................................... 36 Hz–200 Hz Power Voltage .............................................................................. AC 120 V/60 Hz Power Consumption