Manual de instrucciones de Central Pneumatic Air Compressor 47868

Resumen del contenido incluido en la página 1

®
AIR HAMMER
WITH 9 CHISELS
Model 47868
ASSEMBLY and OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright 2002 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Resumen del contenido incluido en la página 2

Specifications Blows per minute 3000 Shank opening 3/4” Air Hose Size 3/8” Air Inlet 1/4”- 18 NPT Female Required Air Pressure 90 PSI Dimensions 6-7/8” L x 2” W x 6-1/2” H Average Air Consumption 12 CFM Tool Weight 3.4 Lbs. Chisels included: Cut Chisel, Removal Tool, Weld Buster, Tapered Punch, Ripping Chisel, Bushing Splitter, Weld Rivet Cutter, Panel Cutter, Long Blade Cutter Save This Manual You will need the manual for the safety warnings and precautions, assembl

Resumen del contenido incluido en la página 3

8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handle must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect air supply. Disconnect ai

Resumen del contenido incluido en la página 4

Warning: Abrasive blasting with sand containing crystalline silica can cause serious or fatal respiratory disease. Exposure to crystalline silica may cause silicosis (a serious lung disease), cancer and death. Exposure to aluminum oxide (a dust generated from material removing processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respira- tor and safety goggles. Avoid skin exposure. Proper ventilation

Resumen del contenido incluido en la página 5

Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Additional Safety Warnings. 1. Repetitive motions or exposure to vibration may be harmful to your hands and arms. 2. When wearing gloves to operate the Air Hammer, make sure that the

Resumen del contenido incluido en la página 6

Operation (continued) 1. You will need to prepare a 1/4” air connector (sold separately) to connect to the Air Inlet (#7). First, wrap the 1/4” air connector (not included) with pipe thread seal tape before connecting to a Air Source Hose (not included). 2. Attach air hose to the Air Inlet (#7) on the Air Hammer. Note: If you are not using an automatic oiler system, before operation, add a few drops of Pneumatic Tool Oil to the airline connection. Add a few drops more after each hour of con

Resumen del contenido incluido en la página 7

Parts List Part No. Description 1 Housing 2 Stopple 3 Pin 4 Bushing 5 Ball 6 Spring 7 Air Inlet 8 Trigger 9 Pin 10 0-ring 11 Regulator 12 Pin 13 Cylinder 14 Plunger 15 Valve 16 Spring 17 Chisel Tool Chisels: Cut Chisel, Removal Tool, Weld Buster, Tapered Punch, Ripping Chisel, Bushing Splitter, Weld Rivet Cutter, Panel Cutter, Long Blade Cutter Maintenance Warning!! Always disconnect from the air source before having maintenance performed. 1. After each use, wipe the Air Chisel down with a lin

Resumen del contenido incluido en la página 8

Assembly Drawing Page 8 SKU 47868