Manual de instrucciones de American Standard Retrospect Console Table 7812.295

Resumen del contenido incluido en la página 1

ASSEMBLY & INSTALLATION
INSTRUCTIONS
RETROSPECT® CONSOLE TABLE
7812.002
7812.295
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.
To help insure that the installation process will proceed smoothly, please read these instructions carefully before you
begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
0282.008 RETROSPECT® CONSOLE PEDESTAL TOP
Recommended Tools

Resumen del contenido incluido en la página 2

1 2 #3 Place a middle leg tube #5 (Item #4) over each threaded rod. Identify the shelf support pins at the inner corners of the Shelf Support (Item #5). Guide #2 each threaded rod through the corners of the shelf support so that these #1 support pins are nearer to you. Run the two front leg sub-assemblies (Item #1) through the two front holes of the towel bar (Item #2). Do the same with the two rear leg assemblies (Item #3). Adjust the hex nut at #4 the end of each rear leg such t

Resumen del contenido incluido en la página 3

2 1) Move console table legs into approximate position near the wall. 2) Place sink on console, aligning the rubber grommets on the top of the front legs with the recesses in the underside of the front of the sink. 3) Place a level on the shelf support and use the four independently adjustable console feet to level the assembly both side-to-side and front-to-back. 4) Place the level on the sink and use the two independently Feet are adjustable adjustable trumpets on the tops of the rear le

Resumen del contenido incluido en la página 4

8711 CONSOLE TABLE LEGS COMPONENTS LIST Note: "XXX" represents color or trim finish options. Specify when ordering. ITEM # PART NO. PACKED QTY. DESCRIPTION A 738728-XXX0A 1 Towel Bar B 1 Shelf Support 738729-XXX0A F C 1 Glass Shelf 738730-0070A D 1 Front Leg Assembly 738744-XXX0A E 1 Rear Leg Assembly 738743-XXX0A F 2 Front Leg Grommet Kit 738879-0070A G 4 Hex Nut Kit #238 738739-0070A G For chrome, replace "XXX" with 002 when ordering. For satin, replace "XXX" with 295 when ordering. E D A C