Manual de instrucciones de Axor Montreux 16520XX1

Resumen del contenido incluido en la página 1

Installation Instructions / Warranty
Montreux Montreux
16502XX1 16505XX1
16506XX1
Montreux
16520XX1

Resumen del contenido incluido en la página 2

Montreux Single-hole Lavatory Faucet 16502XX1 Single hole Lavatory Faucet without Drain 16506XX1 Single-hole Small Lavatory Faucet 16505XX1 Single-hole Bidet Faucet 16520XX1 16502XX1 / 16506XX1 16505XX1 Technical Data Maximum Flow Rate 2.2 gpm Maximum incoming water pressure 145 psi Recommended incoming water pressure 14.5 psi - 72 psi Hot water temperature: max. 176° F* o o Recommended hot water temperature: 120 F - 140 F* Hole size in mounting surface 1 3/8“ Maximum mounting surface depth

Resumen del contenido incluido en la página 3

Replacement Parts 2 1 9 12 4 3 1 handle 16291XXX 2 screw cover, cold/ hot 97987000 3 spout large model 97990XXX 4 4 aerator cpl. 97991XXX 5 shut off unit 94009000 5 6 pull rod 96657000 7 fixation set 13961000 8 connection hose 96321001 9 spout small model 97992XXX 10 spout for bidet 97364XXX 11 aerator cpl. 97360XXX 12 sleeve 97993XXX 6 13 height adjuster & filter 97592000 14 swivel connector 96100000 XXX = Colors 7 001 chrome plated 821 brushed nickel 831 polished nickel 8 13 11

Resumen del contenido incluido en la página 4

Caution: Do not bend or twist the supply hoses! Installation Flush the hot and cold supplies thoroughly before installing this faucet. Damage to the cartridges due to debris is not covered by the Hansgrohe limited lifetime warranty. Place the faucet and the sealing washer in position on the basin / bidet. Slip the slide washer, metal washer and collar nut over the threaded base and tighten the collar nut by hand. sealing washer slide washer metal washer collar nut tensioning screws Tighte

Resumen del contenido incluido en la página 5

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the plunger TM threads with Teflon thread tape and replace. height adjuster Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. flange From under the sink, install the black mack gas- ket, white friction ring , and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time. seali

Resumen del contenido incluido en la página 6

Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose. Always follow the manufactur

Resumen del contenido incluido en la página 7

THIS WARRANTY DOES NOT COVER, AND HANSGROHE WILL NOT PAY FOR: A. Conditions, malfunctions or damage not resulting from defects in material or workmanship. B. Conditions, malfunctions or damage resulting from (1) improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration, or (2) the use of abrasive or caustic cleaning agents or “no rinse” cleaning products, or the use of the product in any manner contrary to the product instructions. C. Labor or other expense

Resumen del contenido incluido en la página 8

Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 Tel. 770 360-9880 • Fax 770 360 9887 www.hansgrohe-USA.com US - Installation Instructions • Part No. 90581421 • revised 12/2006