Manual de instrucciones de Cooper Lighting NEO-RAY Series 75

Resumen del contenido incluido en la página 1

SERIES 75 INSTALLATION MANUAL
Figure 1
STEP 1.
Mount wall angle as shown in Figure 1.
Angles must be mounted level and true for fixtures to mount correctly
WALL ANGLE PROVIDED
IN 8” SECTIONS
CUT LAST SECTION TO
FINISHED CEILING
FIT AVAILABLE SPACE
8'(TYPICAL)
1/4"
Figure 2
NOTE “A”
·
Use tie-wire (by others) to secure and level Re-positioning clevis
brackets may be required
fixture housings to structure. 90° OUTSIDE
after cutting aluminum
CORNER
Based on field dimension pre-cut 4 ft
housin

Resumen del contenido incluido en la página 2

SERIES 75 INSTALLATION MANUAL Figure 3 LIGHTING STRIPS INSTALLATION (SEE DETAILS A & B) DETAIL A STEP 1. Remove lighting strips covers CHASE NIPPLE TOP VIEW STEP 2. Install lighting strips into fixtures (attach to clevis bracket) STEP 3. Attach first strip to outside power feed STEP 4. Through wire all strips STEP 5. Attach lighting strip covers to lighting strips STEP 6. Install shielding STEP 7. Install End Closure/End Plate DETAIL B CLEVIS BRACKET FLEXIBLE CONDUIT (NOT BY NEO-RAY) ADJUSTABLE