Manual de instrucciones de Lightolier MA 01887

Resumen del contenido incluido en la página 1

Lightolier
45 INDUSTRIAL WAY, WILMINGTON, MA 01887
ULM MODULE MOTION OR DAYLIGHT SENSOR ENCLOSURE INSTALLATION INSTRUCTIONS
Install the fixture. The Electrical Connector for
the Module must be accessible through the
1
knockout at the end of the Fixture prior to the
Module being installed.
Fixture
Electrical
Connector
REMOVE COVER MOUNTING AND ELECTRICAL CONNECTIONS
2
3
Remove the Cover from the Module by loosening Mount Module to T-Bar, mate Electrical
the 2 Screws. Connections, install Bushing

Resumen del contenido incluido en la página 2

ATTACH COVER DIMENSIONS TO CUT TILE 4 5 Attach Cover by sliding the Screws from the Cover Cut Ceiling Tile in the center using the dimensions over the two Tabs and fasten securely. below. 4-1/8" (105mm) 2-1/16" (52mm) 1/4" (6mm) Cover 3-3/4" (95mm) 1-5/8" (29mm) G-Type Tile 3-1/4" (89mm) 4-1/8" (105mm) 2-1/16" (52mm) 3-1/2" (89mm) Screw Tab 1-5/8" (29mm) T-Type Tile 3-1/4" (89mm) Slot Grid TILE HD CLIP 6 7 Install cut Ceiling Tile. Adjust HD Clip to ensure Module Fascia sits flush to Ceiling Til