Resumen del contenido incluido en la página 1
INSTALLATION MANUAL
PDS-PLUS
Versatile Projector Mount
Model: PDS-PLUS
AUSTRALIA, NEW ZEALAND, OCEANIA
NORTH AMERICA EUROPE (DISTRIBUTOR)
3130 East Miraloma Avenue Swallow House, P.O. Box 295
Anaheim, CA 92806 USA Shilton Industrial Estate, Mordialloc Victoria 3195
USA and Canada – Shilton, Coventry, England CV79JY Australia
Phone: 800-368-9700 Phone: +44 (0) 2476 614700 Phone: 039586 6330
Fax: 800-832-4888 Fax: +44 (0) 2476 614710 www.premiermounts.com.au
Other Locations – Phone: (001
Resumen del contenido incluido en la página 2
PDS-PLUS Congratulations on the purchase of your new Premier Mounts PDS-PLUS Versatile Projector Mount. The PDS-PLUS works together with our exciting new PDS Base Box. The PDS-PLUS has multiple mounting configurations to fit a variety of projectors. The PDS-PLUS is truly the most VERSATILE projector mount on the market today. Table of Contents Warning Statements..............................................................................................................................
Resumen del contenido incluido en la página 3
PDS-PLUS Parts List Please familiarize yourself with all components contained herein. Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of the PDS-PLUS Mount. M6 x 12mm Phillips Pan Head w/ Integrated Split PDS Base Box (Qty 1) Washer (Qty 12) – 6 come preinstalled on the PDS Base Box #14 x 2” Wood Nylon Spacer (Qty 2) Screws (Qty 2) Flat Washer (Qty 2) M6 x 8mm Socket Head Set Screw Lock-It™ Security System (Qty 1) M6 x 12m
Resumen del contenido incluido en la página 4
PDS-PLUS Parts List (cont.) PDS-PLUS Plastic Barrel Caps Base (Qty 8) (Qty 1) Mounting Legs Mounting Legs – – Long (Qty 4) Short (Qty 4) Standard Lock-It™ Security M2.5 x 12mm M2.5 x 12mm Phillips Security Head Head Screw (Qty 4) Screw (Qty 4) M3 x 16mm M3 x 16mm Phillips Security Head Head Screw (Qty 4) Screw (Qty 4) M3 Flat Washer M3 Flat Washer (Qty 10) (Qty 10) M4 x 12mm M4 x 12mm Phillips Security Head Head Screw (Qty 4) Screw (Qty 4) M5 x 12mm M5 x 12mm Phillip
Resumen del contenido incluido en la página 5
PDS-PLUS Installation Tools Portable Drill Soft Material/ Blanket Pencil Tape Measure Ladder M5 Security Allen Wrench (Supplied) Phillips Head Screw Driver M3 Security Allen Wrench (Supplied) 1/8” Drill Bit (Wood Installation – Commercially Available) Masonry Bit (Concrete Installation – Commercially Available) Installation Manual Page - 5 -
Resumen del contenido incluido en la página 6
PDS-PLUS Optional Mounting Configurations This section will contain different configurations, if applicable, that the PDS-PLUS can be used with. The CLS adapter will be used in conjunction with the PP-FCTA and the PP-FCMA. Please refer the Installation Instructions that come packaged with the following products. PP-FCTA PP-FCMA Standard 1-1/2” NPT AST-2446 APP-2446 AST-1321 Page - 6 - Installation Manual
Resumen del contenido incluido en la página 7
PDS-PLUS Ceiling Installation – Pipe Unpack the PDS-PLUS Mount and familiarize yourself with the components. Please take time before you install the PDS-PLUS to determine the location of where the PDS-PLUS will be mounted. The PDS-PLUS may be attached to 1-1/2” standard threaded pipe (NPT), to one of Premier Mount’s optional ceiling adapters (see page 6), or to a single wood stud (see Page 8). If using an optional adapter, please refer to the installation instructions that come
Resumen del contenido incluido en la página 8
PDS-PLUS Ceiling Installation – Solid Surface Upper Bridge M6 x 8mm Set Screw Base Box 1. Separate the Upper Bridge from the Base Box by removing the six (6) M6 x 12mm Phillips head screws (three on each side). Wood Ceiling Stud Ceiling Surface Mounting Slot Upper Bridge #14 x 2”Wood Screws 2. Use the appropriate slot openings for single wood stud mounting, depending on your ceiling configuration. The adjustable channel slots on the upper bridge plate will allow you to fine tune the f
Resumen del contenido incluido en la página 9
PDS-PLUS Ceiling Wood Stud M6 x 12mm Phillips Head Screw Ceiling Surface Base Box 4. Attach the base box to the upper bridge and secure with the six (6) M6 x 12mm Phillips Head screws (above). DO NOT OVERTIGHTEN THESE SCREWS AT THIS TIME. Concrete Mounting The PDS-PLUS can be mounted to a ceiling with a minimum 6” thickness. Concrete wedge anchors must be used for concrete installation. It is recommended that ¼” wedge anchors be used. A masonry bit must be used to drill the pi
Resumen del contenido incluido en la página 10
PDS-PLUS Attaching the PDS-PLUS to the Projector To truly show the versatility of the PDS-PLUS, the following pictures will show a variety of configurations that can be achieved with the PDS-PLUS. Your individual application will depend on the purchased projector. To truly show the versatility of the ELE-UPROJB, the following pictures will show a variety of configurations that can be achieved with the ELE-UPROJB. Your individual application will depend on the purchase
Resumen del contenido incluido en la página 11
PDS-PLUS Only attach to the projector manufacturer’s specified mounting points on the projector chassis with a minimum of three mounting legs. Please follow all safety instructions specified by the projector manufacturer as well as the safety instructions outlined in this manual. Depending on your application, the long mounting legs and the short mounting legs may be used together. There are multiple configurations that may be used combining the long mounting legs with the sh
Resumen del contenido incluido en la página 12
PDS-PLUS Single Mounting Point Installation Mounting Point If your projector has only one mounting point, a ¼-20 x 5/16” 2. Place the projector plate over the mounting point. screw must be used to attach the mount to the projector. Please 3. Insert the ¼-20 x 5/16” security screw. refer to the following three steps: This screw will use a standard hole when mounting. 1. Determine where the mounting point is located. Attaching the PDS-PLUS Base PDS Base Box Hinge Pin PDS-PLUS Bas
Resumen del contenido incluido en la página 13
PDS-PLUS 2. Slide the projector forward (see arrow above). 3. Make sure the bracket is resting on the Base Box before letting go of the projector. Installation Manual Page - 13 -
Resumen del contenido incluido en la página 14
PDS-PLUS Hinge Pin and Nylon Spacer 4. Place the nylon spacer over the hinge pin. M6 x 12mm Phillips Head Screw w/Integrated Washer Hinge Pin Nylon Spacer and Washer 5. Secure the PDS-PLUS to the PDS Base Box with two (2) M6 x 12mm Phillips Head screws w/Integrated Washers (one on each side). If using the optional Lock-It™ Security Hardware Pack, secure the PDS-PLUS to the PDS Base Box with two (2) M6 x 12mm Security Head screws and two (2) flat washers (one on each side).
Resumen del contenido incluido en la página 15
PDS-PLUS M6 x 12mm Phillips Head Screw w/Integrated Washer Hinge Pin Screw and Washer 6. Once the mount is safely attached, insert and tighten the four (4) M6 x 12mm Phillips Head Screw w/ Integrated Washers. 7. Make all final adjustments at this time. Base Box Adjustment Roll Tilt 1. You can adjust the roll of the projector by loosening the three (3) front and rear M6 x 12mm screws. Do not fully loosen the screws, as the mount may drop. 2. Set the desired roll and then tighten th
Resumen del contenido incluido en la página 16
PDS-PLUS Technical Specifications All measurements are inches (mm). Installation Manual Page - 16 -
Resumen del contenido incluido en la página 17
PDS-PLUS Warranty PREMIER MOUNTS LIMITED LIFETIME WARRANTY What and Who is Covered by this Limited Warranty and for How Long Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of the original owner of this product. The limited warranty is valid only for the original purchaser of the product. What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that
