Resumen del contenido incluido en la página 1
OWNERS MANUAL
Serial No.
99300642-b 1/06
www.lpadjustablebeds.com EDR10611
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
CONTENTS Advisory ............................................................................................................... 4 Acoustics.............................................................................................................. 6 Installation ............................................................................................................ 7 ® Sleep Number Mattress Installation ............................................................... 13 Hand Control Opera
Resumen del contenido incluido en la página 4
ADVISORY IMPORTANT INFORMATION READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT This Precision Comfort™ adjustable foundation has been quality engineered with design features to assure comfort and safety when operated properly. ELECTRICAL GROUNDING PRODUCT RATINGS This product is equipped with a polarized, The bed lift motors are not designed for grounded electrical power cord. The continuous use. Reliable operation and full power cord will only fit into a grounded, life expe
Resumen del contenido incluido en la página 5
ADVISORY IMPORTANT INFORMATION READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT This Precision Comfort™ adjustable foundation has been quality engineered with design features to assure comfort and safety when operated properly. SMALL CHILDREN / PETS WARNING FCC COMPLIANCE After the foundation is unboxed, Precision Comfort™ electrical components immediately dispose of packaging are rated for 110/120 voltage, 60Hz, 3.9 material as it can smother small children amp. Components m
Resumen del contenido incluido en la página 6
ACOUSTICS LIFTING/LOWERING MECHANISMS LOCATION ENVIRONMENT The lift/lower feature will emit a minimal The level of sound experienced during humming sound during operation. This is Precision Comfort™ operation is directly normal. related to the location environment. For example, when a bed is located on a During Precision Comfort™ operation, the hardwood floor with the massage feature lift arm wheels make contact with the in operation, a vibrating tone will be platform support of the bed. This ap
Resumen del contenido incluido en la página 7
INSTALLATION For Precision Comfort™ installation and setup, complete the numbered procedure indicated below and on the following pages: 1. Before discarding any packing materials, check the adjustable bed shipping carton and verify the following items are included: • (1) Mattress Retainer MATTRESS RETAINER • (1) Mattress Retainer Hardware Kit • (4) Bed Legs • (4) Locking Leg Casters • (2) Headboard Bracket Assemblies • (1) Headboard Bracket Hardware Kit ® • (1) Precision Comfort Foundation Hardw
Resumen del contenido incluido en la página 8
INSTALLATION 2. Carefully Lift the bed base frame from the PRESS IN (SLIGHTLY) AND shipping carton, keeping the unit top-side- PUSH DOWN TO REMOVE down. BATTERY COMPARTMENT DOOR 3. Install (4) legs into the base frame. Simply screw each leg into a tapped hole at each corner of the base frame (FIGURE 1). Insert casters into the bottom of each bed leg (if applicable). POWER DOWN BOX BATTERY COMPARTMENT DOOR CASTERS – PRESS-FIT INTO BOTTOM OF FIGURE 2: Receiver unit (power down box) battery LEGS (I
Resumen del contenido incluido en la página 9
INSTALLATION 10. Install mattress retainer as follows: g. Tighten screws to complete mattress retainer installation (FIGURE 6). a. Locate (1) mattress retainer and (1) mattress retainer hardware kit (bag). b. Install (1) cupped washer, (1) spacer NOTE and (1) flat washer on (4) mattress DO NOT USE POWER SCREWDRIVER TO retainer bolts (FIGURE 4). INSTALL MATTRESS RETAINER. DO NO DO NO DO NO DO NO DO NOT T T T T O O O O OVERTIGHTEN MA VERTIGHTEN MA VERTIGHTEN MA VERTIGHTEN MA VERTIGHTEN MATTRESS RE
Resumen del contenido incluido en la página 10
INSTALLATION 11. Install headboard brackets to the 12. Install headboard bracket assemblies per foundation base frame. When attaching (2) the following procedure: twin size units to a king size headboard, a. Raise the head section of the bed (with use swing-away hinges (see accessories) hand control) to gain access to the bed to connect the twin units. base frame. b. Slide one headboard bracket channel onto one side of the bed base frame. NOTE Using (2) bolts/nuts (FIGURE 8) attach FAILURE TO FO
Resumen del contenido incluido en la página 11
INSTALLATION USE (2) 3 INCH CARRIAGE BOLTS AND NUTS TO ATTACH EACH BRACKET CHANNEL TO THE FRAME EXTENSIONS ANGLE BRACE ANGLE BRACE SLIDE HEADBOARD BRACKET CHANNEL OVER USE (2) 1 INCH BOLTS AND THE FRAME EXTENSION NUTS (TIGHTEN) TO ATTACH HEADBOARD BRACKET FLANGE TO EACH BRACKET CHANNEL FIGURE 9: Headboard bracket channel installation (one each side of the head section of the bed). FIGURE 10: Headboard bracket flange installation (attach one flange to each of the headboard bracket channels). c. A
Resumen del contenido incluido en la página 12
MEASURE FLANGE SLOTS CENTER-TO-CENTER TO CHECK HEADBOARD HOLE LOCATION REMOVE 1 INCH BOLTS AND RELOCATE FLANGES TO ACHIEVE CENTER-TO- CENTER DISTANCE REQUIRED FOR HEADBOARD MOUNTING HOLES INSTALLATION d. Slide headboard bracket assemblies (in or out) to achieve a distance of 1.5 inches (38.1mm) to 2 inches (50.8mm) between the edge of the foundation base and headboard bracket flange assemblies (FIGURE 11). e. Firmly tighten the 3 inch carriage bolts of both headboard bracket channels. f. Measure
Resumen del contenido incluido en la página 13
® Sleep Number MATTRESS INSTALLATION INSTALLATION INSTRUCTIONS ® Tools required—utility knife, Phillips head screwdriver. IMPORTANT: Wash hands before ® Install the Sleep Number mattress, per beginning installation. Residue on the following procedure: hands will easily transfer to cloth ® covered bedding components. 1. Verify Precision Comfort adjustable foundation setup is complete. 2. Identify and remove (2) locator pins in the adjustable foundation (FIGURES 13 and “A” = 32-1/2” (approx.) A “B
Resumen del contenido incluido en la página 14
® Sleep Number MATTRESS INSTALLATION 13. Complete mattress setup per the Sleep ® Number installation instructions. This will EXERCISE EXTREME CA EXERCISE EXTREME CA EXERCISE EXTREME CAUTION WHEN UTION WHEN UTION WHEN EXERCISE EXTREME CA EXERCISE EXTREME CAUTION WHEN UTION WHEN include fitting the base pad, air chambers, USING UTILITY KNIFE! USING UTILITY KNIFE! USING UTILITY KNIFE! THE DANGER OF USING UTILITY KNIFE! USING UTILITY KNIFE! center wall and topper pad. SERIOUS FINGER CUTS ARE POSSIBL
Resumen del contenido incluido en la página 15
® Sleep Number MATTRESS INSTALLATION NOTE IF ADJUSTABLE FOUNDATION SERVICE IS Æ MOUNTING REQUIRED, REMOVE THE SLEEP NUMBER BOLTS MATTRESS BEFORE THE SERVICE TECHNICIAN ARRIVES. METAL WASHERS LARGE PLASTIC WASHERS FOAM WALL CENTER SECTION CORNER LOCK (4) FOAM WALL SECTIONS CUT 1/4 INCH SLIT THROUGH BOTTOM FABRIC PANEL OF MATTRESS COVER ® SLEEP NUMBER MATTRESS COVER EQUIPPED WITH ZIPPERED TOP PANEL ADJUSTABLE IMPORTANT: make FOUNDATION certain all 4 sides of the ® Sleep Number mattress cover are f
Resumen del contenido incluido en la página 16
HAND CONTROL OPERATION TRANSMISSION INDICATOR LIGHT POSITION RECALL BUTTONS Press to recall a massage/wave setting assigned by the program MASSAGE SET BUTTON set button. Press to capture a setting of the massage and/or wave functions FOOT UP/DOWN BUTTON as a programmed position. Press Press and hold to raise or the favorite massage button to lower the foot section. activate the preset position. FLAT BUTTON Press to return bed to the HEAD UP/DOWN BUTTON level position. Press and hold to raise or
Resumen del contenido incluido en la página 17
RECEIVER UNIT OPERATION In case of a power outage, press and hold POWER DOWN BOX the learn button on the receiver unit (power down box) to lower the bed to the LEARN BUTTON flat position (FIGURE 18). This function is only for lowering the bed and will not operate the bed to any other position. The (2) 9 volt batteries should be replaced after this function is used. In the event the power down feature does not work, check to make sure the (2) 9 volt batteries are good. FIGURE 16: Power down box l
Resumen del contenido incluido en la página 18
PROGRAMMING 1 hand control - 1 bed The two step procedure below is required to program 1 hand control to operate 1 bed. Before beginning, make certain the bed is plugged into a working grounded electrical outlet. STEP 1 Locate the receiver unit (power down box) for the bed and press the learn button for 1 second and release (FIGURE 16). POWER DOWN BOX LEARN TRANSMISSION BUTTON INDICATOR LIGHT POS 1 BUTTON FIGURE 16: Power down box learn button. STEP 2 On the hand control, simultaneously press
Resumen del contenido incluido en la página 19
PROGRAMMING 2 hand controls - 1 bed The three step procedure below is required to program 2 hand controls to operate 1 bed. Before beginning, make certain the bed is plugged into a working grounded electrical outlet. STEP 1 Locate the power down box for the bed and press the learn button for 1 second and release (FIGURE 16). POWER HAND HAND CONTROL 1 CONTROL 2 DOWN BOX LEARN BUTTON TRANSMISSION INDICATOR LIGHT POS 1 BUTTON FIGURE 16: Power down box learn button. STEP 2 On hand control 1, simul
Resumen del contenido incluido en la página 20
PROGRAMMING 1 hand control - 2 beds The three step procedure below is required to program 1 hand control to operate 2 beds. Before beginning, make certain the beds are plugged into a working grounded electrical outlet. STEP 1 Locate the power down box for bed 1 and press the learn button for 1 second and BED 1 release (FIGURE 16). POWER DOWN BOX LEARN BUTTON BED 2 TRANSMISSION INDICATOR LIGHT POS 1 BUTTON FIGURE 16: Power down box learn button. STEP 2 On the hand control, simultaneously press
