Manual de instrucciones de American Standard Single Control Kitchen Faucet with Cast Spout 3821.631 Series

Resumen del contenido incluido en la página 1

Installation
Instructions
3821.631 SERIES
3821.641 SERIES
3821.634 SERIES
SINGLE CONTROL KITCHEN
3821.644 SERIES
FAUCET WITH CAST SPOUT
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
Certified to comply with ANSI A112.18.1M
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
M968188E
TOOLS REQUIRED
Phillips Screwdriver
Adjustable Wrench
Plumbers' Putty or Caulking
Tubing Cutter
Regular Screw

Resumen del contenido incluido en la página 2

MAKE WATER SUPPLY CONNECTIONS 2 NOTE: FLEXIBLE SUPPLIES HAVE TO BE PURCHASED SEPARATELY Carefully bend COPPER SUPPLIES to meet water supply COPPER SUPPLIES lines using the palms of the hands to avoid kinking. TUBES Connect HOT water supply line to left tube, and COLD water supply line to right tube using appropriate 3 4 connectors. Use 1/2" IPS FLEXIBLE SUPPLIES (3) or 3/8" O.D. BULL-NOSE RISERS (4). Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper

Resumen del contenido incluido en la página 3

TEST INSTALLED FAUCET 5 Move HANDLE down into "off" position and remove AERATOR. HANDLE Turn on water supplies and check connections for leaks. SPRAY Operate HANDLE up and down, left and right to flush water lines thoroughly. For faucet with spray, direct SPRAY HEAD into sink and AERATOR activate SPRAY. Check hose connections for leaks. Move HANDLE down to "off" position and replace AERATOR. CHECK CONNECTIONS FOR LEAKS SERVICE 6 Reduced flow. If the flow gradually reduces over a number of months

Resumen del contenido incluido en la página 4

SINGLE CONTROL KITCHEN FAUCET WITH CAST SPOUT 023527-0070A MODEL NUMBERS CARTRIDGE SCREWS 3821.631 SERIES 3821.641 SERIES 023529-0070A 060343-0070A 3821.634 SERIES CARTRIDGE SPACER WITH 3821.644 SERIES O-RINGS 060486-YYYOA SPOUT KIT 030746 -0070A HANDLE SCREW KIT 066070-YYY0A 060483-YYY0A AERATOR SINGLE HOLE MOUNTING KIT 060275-YYY0A HANDLE KIT A907468-YYY0A ESCUTCHEON CAP 060366-0070A SPOUT SEAL KIT 921877-0070A CAP RETAINER 060484-YYY0A 042850-0070A ESCUTCHEON WITH DIVERTER SPRAY HOLE M961773-