Resumen del contenido incluido en la página 1
ECDIS FEA-2100/2105
C-MAP Chart Update Manual
Update chart before embarking on a voyage. Do not update charts during a voyage.
During updating, do not display the radar overlay screen or the route monitor screen.
Hangup may result. If hangup occurs, turn the power off and on again.
It takes about seven hours to update one zone. Plan accordingly.
[SELECT] key Trackball
[CHART PLAN] key
ECDIS Keyboard
1. Preparation
1. Press the [CHART PLAN] key.
The menu appears in the Inform
Resumen del contenido incluido en la página 2
[Close] button 3. Check the box on [Automatic SENC conversion] and [Automatic Display Unit]. (Or confirm that the check marks are displayed.) To check the box, place the cursor on the box and press the [SELECT] key. 4. Place the cursor on the [Close] button and press the [SELECT] key to close the windows. Check box 2. Loading the catalogue chart to be updated from CD-ROM to ECDIS 1. Insert latest CD-ROM in the CD drive. 2. Press the [CHART PLAN] key to display the menu.
Resumen del contenido incluido en la página 3
The catalogue name [CM93PROF3] is shown. 5. Place the cursor on the [OK] button and press the [SELECT] key. [ ] button Note: If the catalogue name is the same as an existing one you named previously, the following message appears. To overwrite the name, place the cursor on the [Yes] button and press the [SELECT] key. To change the name, place the cursor on the [No] button, press the [SELECT] key and enter a new name. [YES] button 6. Place the cursor on the [Clos
Resumen del contenido incluido en la página 4
3. Displaying the Catalogue Chart 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on the [Catalogue] and press the [SELECT] key. [Catalogue] [NAME] [Catalogue Charts] 3. Check on the [Name] and [Catalogue charts] [Overview] check boxes and select [CD] in the [View filters] window. 4. Place the cursor on the down arrow in the [CD] box, press the [SELECT] key and select the catalogue name entered at step 5 in the previous section. Note: We recomme
Resumen del contenido incluido en la página 5
6. Set the chart group to update as follows. a. Place the cursor on the [Groups] button at the bottom of the [Catalogue] window and press the [SELECT] key. [Groups] button [Catalogue] window b. Place the cursor on the [New] button and press the [SELECT] key. [NEW] button c. Place the cursor on an alphbet or number button and press the [SELECT] key. Repeat this to enter group name. Set a name which is easy to understand. d. Place the cursor on t
Resumen del contenido incluido en la página 6
e. Place the cursor on the [Add Frame] button and press the [SELECT] key. f. Rotate the trackball to place the cursor inside the chart cell frame desired and press the [SELECT] key. Repeat this to select all desired areas. The selected areas are shown in blue. [Add Frame] button g. After selecting all areas desired, place the cursor on the [DONE] button and press the [SELECT] key. [Done] button h. Confirm that the chart numbers selected are [Save] button [I
Resumen del contenido incluido en la página 7
4. Chart Conversion (from ENC format to SENC format) The chart data in a CD-ROM (ENC format) must be converted to SENC format in order to display it on the ECDIS. Note that the conversion takes several hours. 1. Press the [CHART PLAN] key to display the menu. 2. Place the cursor on [Load] - [View loaded CD Catalogue] and press the [SELECT] key. [Load] [View loaded CD Catalogue] [Group Select] window 3. Choose the catalogue name from the [CD] box. [CD] box 4. Pla
Resumen del contenido incluido en la página 8
6. Place the cursor on the [Missing only] check box and press the [SELECT] key to display the check mark. 7. Place the cursor on the [Load] button and press the [SELECT] key. [Load] button [Missing only] check box The catalogue data is loaded to the ECDIS. During loading, the hourglass mark and the number of chart loaded are displayed. For example, if the screen displays "110 of 209", 110 charts of 209 charts in the CD have been loaded to the ECDIS. "209 of 209" means that the
Resumen del contenido incluido en la página 9
[S57LOAD] window After loading all charts desired, the chart conversion (from ENC to SENC) automatically starts. 8. At this time, the message [No Base Cell available] and chart cell numbers are displayed in the [S57 LOAD] window. Then, place the cursor on the [OK] button and press the [SELECT] key. The chart CD-ROM contains all chart data, but there are some areas which the base charts cell Chart cell number [No Base Cell available] (last three digits of chart number : 000) are not i
Resumen del contenido incluido en la página 10
The error message may appear during conversion, however leave the message displayed until the conversion is completed. [Error] The list in the [Conversion List] becomes blank after conversion is completed. 10. Place the cursor on the [Close] button of the [SENC CONVERT], [Failed SENC conversions] and [Catalogue] and press the [SELECT] key to close the windows. The message [FAIL CONVERSION] may appear List becomes blank after conversion during the conversion. If this occurs,
