Resumen del contenido incluido en la página 1
Keg Cooler
The model number can be found on the serial plate located on the
back panel of the unit.
All repair parts available for purchase or special order when you
visit your nearest service depot. To request service and/or the
Model • Modèle• Modelo
location of the service depot nearest you, call the TOLL FREE
NUMBER.
DKC445BL
When requesting service or ordering parts, always provide the
following information:
For service, contact your nearest
• Product Type
service depot or call:
• Model
Resumen del contenido incluido en la página 2
OWNER’S MANUAL MANUEL D'UTILISATION MANUAL DEL PROPIETARIO Model • Modèle• Modelo DKC445BL CAUTION: Read and follow all safety rules and operating instructions before first use of this product. Keg Cooler PRÉCAUTION: Owners Manual Veuillez lire attentivement les consignes de sécurité et les instructions d'utilisation avant l'utilisation initiale de ce produit. Glacière de bière en fût Guide d'utilisation PRECAUCIÓN: Lea y observe todas las reglas de seguridad y las Barril Refrigerador instrucci
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS Before putting appliance into use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 We care for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Tips for energy savings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Disposal of worn out appliance . . . . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
BEFORE PUTTING APPLIANCE INTO USE • Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. • Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance) WE CARE FOR THE ENVIRONMENT • Our products use environmentally friendly (recyclable) materials. To this end, individual packaging materials are clearly identi
Resumen del contenido incluido en la página 5
WARNING Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a power cord having an equipment grounding conductor and grounding plug. The plug must be plugged into an appropriate wall outlet that is in
Resumen del contenido incluido en la página 6
CHILL'N TAP ACCESSORIES (included with this unit) 1 Chrome Rail (for attachment to Worktop) 4 Self-Tapping Screws (to attach chrome rail) 1 CO2 Cylinder Support Stand 1 CO2 Cylinder (empty) 1 CO2 Regulator (high/low pressure gauges) 1 CO2 Air Line Hose (red) 2 CO2 Air Line Hose Connectors (black) 1 Beer Keg Coupler 1 Beer Tower Unit (complete with faucet, hose and wing nut) 1 Rubber Washer (to be installed inside wing nut) 1 Beer Tower (Quick Connect) Bayonet Attachment (beer tower installation)
Resumen del contenido incluido en la página 7
CHILL'N TAP ASSEMBLY INSTRUCTIONS: 1. Remove Worktop: Using a Phillips Screwdriver, remove the three screws located on the front underside edge of the worktop and the three screws located at the rear (back) side of the worktop. See Fig's. 1 & 2 Remove the worktop from the cabinet and position the Fig. 1 worktop on top of the cabinet so that the front corners are staggered across the front corners of the cabinet. 2. Installation of Top Rail: Attach the chrome rail to the work top using fou
Resumen del contenido incluido en la página 8
CHILL'N TAP ASSEMBLY INSTRUCTIONS CON’T 8. Installation of CO2 Air Line inside Cabinet: of the cabinet. (6:00 o'clock position) Using a Remove rubber plug located at the exterior (top Phillips Screwdriver, attach the beer tower to right hand corner) of the cabinet. (store this the bayonet using four machine screws plug in a safe place, it will be required when provided and tighten firmly. To remove (unlock) converting your unit back to a basic refrigerator) the beer tower assembly from the c
Resumen del contenido incluido en la página 9
CHILL'N TAP ASSEMBLY INSTRUCTIONS CON’T 1 6 . Installation of the Keg Coupler: IMPORT A N T When the secondary valve (handle) is positioned N O T I C E ; Make sure the black pull handle of the " Vertical" (north/south) the valve is open. keg coupler is in the "upward" (closed) position To open the main CO2 cylinder valve, (slowly) turn before installing on the beer keg. See Fig. 9 Insert the main valve counter clockwise until fully open. the keg coupler into the locking neck of the beer You w
Resumen del contenido incluido en la página 10
HOW TO REPLACE AN EMPTY CO2 CYLINDER 1. Close the main cylinder valve (A) by turning in a 9. Readjust regulator pressure (D) (if necessary) clockwise direction. See Fig.13 between 10 ~ 12 psi/lbs. 2. Close the secondary shut-off valve (C) by 10. Open the secondary shut-off valve (C)by turning turning to "horizontal" (east/west) position on to "vertical" (north/south) position on lower stem lower stem pipe. See Fig.13 pipe. 3. Remove the air line clamp and hose from the regulator. D A 4. Remove
Resumen del contenido incluido en la página 11
HELPFUL HINTS ON CONTROLLING TEMPERATURE Keep a thermometer handy. (adjust temperature control knob accordingly) Periodically monitor temperatures inside your cooler. (adjust as necessary) Keep the refrigerator door closed as much as possible to avoid temperature fluctuations CLEANING AND MAINTENANCE AUTOMATIC DEFROSTING: There is no need to defrost the refrigerator, because ice depositing on the evaporator is defrosted automat- ically. Ice build-up on the evaporator during compressor operation;
Resumen del contenido incluido en la página 12
HELPFUL HINTS TO ASSIST YOU IN SERVING THE PERFECT GLASS OF COLD BEER STORAGE AND HANDLING: • Draught Beer should be treated as a food product. In most instances draught beer is not pasteurized. It is very important that you store and handle it properly. • Draught Beer should be immediately stored in a refrigerated cabinet. • Draught Beer products have a shelf life, which on "average" is 30 days after the keg is tapped. By keeping the beer keg pressurized, (with CO2) the shelf life can be exte
Resumen del contenido incluido en la página 13
KEG SIZES There are two(2) standard size beer kegs that can be used in your Chill 'N Tap Keg Cooler. 30 Liter Keg (1/4 Barrel) yields 3-1/2 cases (1056ozs) of beer. (Keg Weight 91lbs Full) 20 Liter Keg ( 1/6 Barrel) yields 2-1/2 cases (704ozs) of beer (Keg Weight 54lbs Full) Note: The keg stand is required only when using the 30 liter size beer keg. DISPENSING BEER IMPORTANT NOTICE: Beer is easily available with Danby's new Keg Cooler Refrigerator, however, it is not intended to be avail- able t
Resumen del contenido incluido en la página 14
CONVERTING THE CHILL 'N TAP KEG COOLER TO A BASIC "ALL REFRIGERATOR": The Chill 'N Tap Keg Cooler is designed to offer you quick and easy conversion from a beer dispensing unit to a basic compact "All Refrigerator" application. Simply follow the below steps; 1. Close the main valve on the CO2 cylinder. 2. Close the secondary shut-off valve (horizontal position) on the regulator stem pipe. 3. Close the connection between the beer keg and the keg coupler by pulling and lifting the handle into the
Resumen del contenido incluido en la página 15
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer. This warranty is available only to the person to whom the unit was originally sold by Danby or by an authorized distributor of Danby, and is non-transferable. TERMS OF WARRANTY Plastic parts (ie. evaporator door, door rails, covers and trays are warranted for thirty (30) da
