Manual de instrucciones de Perlick Z2148EMU

Resumen del contenido incluido en la página 1

Troubleshooting
INSTALLATION AND OPERATING INSTRUCTIONS
UNIVERSAL EMPTY KEG SENSOR
Problem: Beer flow is slower with Universal Empty Keg Sensor
than with standard Perlick coupler.
Probable Cause: Beer Flow Control Handle is in CLEAN position.
Part No.
Solution: Slowly turn Beer Flow Control Handle to ON position.
43739
Problem: Beer does not flow after keg is tapped.
Probable Cause: Universal Empty Keg Sensor has locked up.
The Perlick Universal Empty
Solution: Turn Beer Flow Control Handle t

Resumen del contenido incluido en la página 2

INSTALLATION INSTRUCTIONS TAPPING AND CLEANING PROCEDURES 1. Disconnect keg coupler from keg. Beer Flow Control Filling the Lines the First Time Handle Operating 2. Open faucet to relieve line pressure and 1. Turn Beer Flow Control Handle OFF. Positions (See Fig. 1). close when flow ceases. 2. Tap fresh keg. 3. Disconnect beer line including seal washer from keg coupler. EXISTING 3. Turn Beer Flow Control Handle to CLEAN. BEER LINE (See Fig. 3). 4. Connect beer line including seal washer to AN