Manual de instrucciones de Central Pneumatic Air Compressor 95583

Resumen del contenido incluido en la página 1

tire inflator with
pressure gauge
Model 95583
asseMbly and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
t o pre Vent serious injury, read and understand
all warnings and instructions before use.
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herei

Resumen del contenido incluido en la página 2

specifications ABS reinforced nylon fiber grip, rubber protection ring Material on gauge, brass fittings, chrome plated trigger Maximum PSI 174 Trigger 5-3/16” Long Dial Gauge 2-1/2” Gauge Range 0-174 PSI Air Chuck with Clamp 3/4” L X 1.23 W Air Inlet 1/4” X 18 NPT save this Manual You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Keep

Resumen del contenido incluido en la página 3

8. use eye and ear protection. Always wear ANSI-approved impact safety goggles and hearing protection. Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. 9. do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. 10. Maintain tools with care. Keep tools clean for better and safer performance.

Resumen del contenido incluido en la página 4

22. warning: the brass components of this product contain lead, a chemical known to the state of california to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) 23. warning: t he warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product,

Resumen del contenido incluido en la página 5

operation 1. Attach the Air Inflator to compressor and turn the air compressor on. 2. Press down on the Quick Release Clamp (see Figure 1) and slide the Hose fully onto the valve stem. 3. Grip the Tire Inflator firmly and gently squeeze the Trigger (see Figure 1). 4. Continue to press down on the Trigger until the Dial Gauge is at the desired PSI. Release the Trigger. 5. Press down on the Quick Release Clamp and quickly pull the Hose off of the valve stem. Shut off air compressor and releas

Resumen del contenido incluido en la página 6

warranty Limited 90 d y a arrantyw Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents; repairs or alterations outside our facilities; or to lack of maintenance