Resumen del contenido incluido en la página 1
SPEED Game Mouse
User’s Manual
Model(s): X-710 X-718
www.a4tech.com
Resumen del contenido incluido en la página 2
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
Resumen del contenido incluido en la página 3
HOW TO CONNECT YOUR MOUSE 1. Locate an available USB mouse port on the back of your computer. 2. Insert the USB mouse connector into the USB port . If you like to use the PS2 port (for the round PS/2 plug), you will need to plug the USB connector with a PS2 adapter. HOW TO CHANGE THE DPI SETTING OF SPEED GAME MOUSE Click the button shown on the right figure to quickly shift from 600-800-1200-1600-2000 DPI as the scroll wheel changes color between shifts. You don’t need any d
Resumen del contenido incluido en la página 4
MODEL: X-710 At Resolution: Scrolling Wheel Recommend for: Suitable for Resolution of display will change to: （Recommend） 400DPI Non Slow-Speed and normal accuracy player 640×480 600DPI Green Medium-Speed and required average accuracy player 800×600 800DPI Yellow Fast Speed and required above average accuracy player 1024×768 1000DPI Red High-Speed and required above average accuracy player 1152×864 th Click 6 key to quickly shift from 400, 600, 800 to 1000 DPI MODEL: X-718 At Re
Resumen del contenido incluido en la página 5
STEP ONE: HOW TO INSTALL SMART-X7 SOFTWARE ***** For Windows Me / 2000 / 2003 / XP 1. MUST: Please uninstall any previous mouse driver before installing the Smart-X7 2. MUST: Make sure you have completely finished setting up your Mouse Properties Window mouse pad and mouse 3. Insert the included Compact Disc (CD) into your CD-ROM 4. Click “Install Driver”. Select model: X-710/718 Optical Mouse 5. Click the button on the right to install driver 6. Follow the on screen instruction
Resumen del contenido incluido en la página 6
STEP TWO: HOW TO PROGRAM YOUR MOUSE BUTTONS l Open your Mouse Properties. First Tab: Button Section I: Button Assignment 1. The mouse image that appears in the first section is a key to numbers listed to the right. For example, button #1 has been assigned as “Main Button” by default and it’s not programmable. 2. The rest of the buttons from #2 to # 5 are programmable. Section II: Double-Click Speed Section III: Button Configuration Adjust your double-clic
Resumen del contenido incluido en la página 7
STEP THREE: HOW TO SET X7-JUMP FUNCTION ( LEARN TO SIMULATE KEYBOARD’S COMMANDS AND PROGRAM XY SENSITIVITY INDEPENDENTLY) The function Smart-X7 not only provides program XY sensitivity independently , but also can be set in any of the buttons from # 2 to # 5 of simulation functions for the keyboard and half of the mouse button simulation functions for the keyboard. 1. Double click on the mouse icon “ ” will bring you the mouse property. (image A ) 2. One Click on X7-Jump and you’ll
Resumen del contenido incluido en la página 8
Section I: Change Mouse DPI ：Set mouse XY axis sensitivity levels In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This avoids the error in operation for more efficiency. You can configure your mouse as synchronism or non-synchronism higher/lower with many parameters to control the X/Y dpi by yourself in this smart X7 Software , Model At Resolution: LED of Scrolling Wheel Confirmable range of X/Y axes by software X-710 400DPI Non 200DP
Resumen del contenido incluido en la página 9
Section II: Keystrokes To ADD keystrokes: Click on the button “New Keystroke” and you’ll see a “Keystroke” Window pops up (Image: left, bottom) Here you will see 3 radio buttons: l Press and hold will input keystrokes consecutively l Press and hold will only input once the keystrokes l Press will input keystrokes consecutively, press again will release the keystrokes st If you select the 1 radio button, it means you would like to have the mouse completely simulate the keyboard
Resumen del contenido incluido en la página 10
st Example 1: Select 1 Radio Button 1. Click on “Record” (Reference: Image A) 2. Press “R” on the Keyboard 3. Click “OK” 4. It will bring you back to previous page 5. Now click on “Keystroke (R)”, the one you just created 6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the “Keystroke (R)”. 7. Green icon will turn red once it’s been selected. (Image B) 8. Click “Apply” >> “OK” (Image A) We have stored it in Mouse Button # 2. Let’s try it on regu
Resumen del contenido incluido en la página 11
st Example 2: Select 1 Radio Button 1. Click on “Ctrl+A” (Reference: Image C) 2. Press “Ctrl+A” on the Keyboard 3. Click “OK” 4. It will bring you back to previous page 5. Now click on “Keystroke (Ctrl+A)”, the one you just created 6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the “Keystroke (Ctrl+A)”. 7. Green icon will turn red once it’s been selected. (Image D) 8. Click “Apply” >> “OK” (Image C) We have stored it in Mouse Button # 3. Let’s
Resumen del contenido incluido en la página 12
nd Example 3: Select 2 Radio Button 1. Click on “Record” (Image E) 2. Press “A4TECH” on the Keyboard 3. Click “OK” 4. It will bring you back to previous page 5. Now click on “Keystroke(A4TECH)”, the one you just created 6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the “Keystroke (A4TECH)”. 7. Green icon will turn red once it’s been selected. (Image F) 8. Click “Apply”, then “OK” (Image E) We have stored it in Mouse Button # 4. Let’s try it
Resumen del contenido incluido en la página 13
rd Example 4: Select 3 Radio Button 1. Click on “Record” 2. Press “Z the Keyboard (Image G) 3. Click “Stop” to stop recording >> then click “OK” 4. It will bring you back to previous page (Image F) 5. Now click on “Keystroke(Z)”, the one you just created 6. Select the Mouse Button (green icon) on the Mouse Image to your right to store the “Keystroke(Z)”. 7. Green icon will turn red once it’s been selected. (Image H) 8. Click “OK” Image G We have stored it in Mouse Button # 5. Le
Resumen del contenido incluido en la página 14
have successfully created a command. TECH SUPPORT For tech support, please visit our website at www.a4tech.com or email us at support@a4tech.com WARRANTY All A4 Tech products come with 2 years limited warranty.
